Seagate Announces Exos X14 14TB Enterprise Hard Drive

Subject: Storage | March 27, 2018 - 01:33 AM |
Tagged: Seagate, helium, enterprise, datacenter, 14tb

During the Open Compute Summit Seagate showed off a new drive in its Helium-filled Exos X lineup that offers up 14TB of storage in a 3.5-inch SATA hard drive package. The aptly named Exos X14 is a low power 7200 RPM drive that utilizes PMR rather than the more exotic methods (shingled, HAMR, ect) and is a drop-in replacement that Seagate claims allows up to 40% more storage space per rack than previous drives – up to 3,360 TB per rack!

Seagate Exos X14 14TB Enterprise Hard Drive.jpg

The drive is aimed at datacenter customers and cloud storage providers clamoring for fast-enough affordable storage. The Exos X14 platform is expected to use a whopping 9-platters each holding 1.55 terabytes. Beyond that, Seagate is not sharing exact specifications except to say that it has bested the sustained transfer rates of the Exos X12 and competitors and has leading and reliable random I/O performance that has been optimized for hyperscale environments (so take that for what you will) likely thanks to the increased storage density.

Seagate did note that the new drives support Seagate Secure encryption and the drive is rated for FIPS 140-2 / Level 2 and ISO/IEC 15408 certifications so at least in theory it meets a minimum level of IT security practices in the methods it uses to protect the data stored on it.

A research study performed by IDC and sponsored by Seagate found that worldwide data creation could hit up to 163 Zettabytes (163 trillion Gigabytes!) by 2025 (10-times the amount of data created last year) which is mind-boggling. Even if the reality is half of that, that’s still an absolutely staggering amount of data that needs to be stored somewhere and both spinning rust and expensive flash are going to have to make some significant advancements to get to that point – and to that point with an acceptable TCO.

The Exos X14 is expected to start shipping to datacenter customers this summer and is currently being sampled to select partners like Baidu and Facebook (Facebook was showing off a server packed with the drives at OCP 2018).

Also interesting is Seagate’s announcement of “Mach.2” multi-actuator technology and its advancements into making HAMR (heat assisted magnetic recording) more reliable both of which are going to be important for the future.

Source: Seagate
Author:
Subject: Storage
Manufacturer: CalDigit

CalDigit Tuff Rugged External Drive

There are a myriad of options when it comes to portable external storage. But if you value durability just as much as portability, those options quickly dry up. Combining a cheap 2.5-inch hard drive with an AmazonBasics enclosure is often just fine for an external storage solution that sits in your climate controlled office all day, but it's probably not the best choice for field use during your national park photography trip, your scuba diving expedition, or on-site construction management.

For situations like these where the elements become a factor and the chance of an accidental drop skyrockets, it's a good idea to invest in "ruggedized" equipment. Companies like Panasonic and Dell have long offered laptops custom-designed to withstand unusually harsh environments, and accessory makers have followed suit with ruggedized hard drives.

Today we're taking a look at one such ruggedized hard drive, the CalDigit Tuff. Released in 2017, the CalDigit Tuff is a 2.5-inch bus-powered external drive available in both HDD and SSD options. CalDigit loaned us the 2TB HDD model for testing.

caldigit-tuff-hdd-1.jpg

Continue reading our review of the CalDigit Tuff rugged USB-C drive!

PNY Adds CS900 960GB SATA SSD To Budget SSD Series

Subject: General Tech, Storage | March 18, 2018 - 12:20 AM |
Tagged: ssd, sata 3, pny, 3d nand

PNY has added a new solid-state drive to its CS900 lineup doubling the capacity to 960GB. The SATA-based SSD is a 2.5" 7mm affair suitable for use in laptops and SFF systems as well as a budget option for desktops.

PNY CS900 960GB SATA SSD.png

The CS900 960GB SSD uses 3D TLC NAND flash and offers ECC, end-to-end data protection, secure erase, and power saving features to protect data and battery life in mobile devices. Unfortunately, information on the controller and NAND flash manufacturer is not readily available though I suspect it uses a Phison controller like PNY's other drives.

The 960GB capacity model is rated for sequential reads of 535 MB/s and sequential writes of 515 MB/s. PNY rates the drive at 2 million hours MTBF and they cover it with a 3-year warranty.

We may have to wait for reviews (we know how Allyn loves to tear apart drives!) for more information on this drive especially where random read/write and latency percentile performance are concerned. The good news is that if the performance is there the budget price seems right with an MSRP of $249.99 and an Amazon sale price of $229.99 (just under 24 cents/GB) at time of writing. Not bad for nearly a terabyte of solid state storage (though if you don't need that much space you can alternatively find PCI-E based M.2 SSDs in this price range).

Source: PNY
Subject: Storage
Manufacturer: MyDigitalSSD

Introduction, Specifications and Packaging

Introduction:

When one thinks of an M.2 SSD, we typically associate that with either a SATA 6GB/s or more recently with a PCIe 3.0 x4 link. The physical interface of M.2 was meant to accommodate future methods of connectivity, but it's easy to overlook the ability to revert back to something like a PCIe 3.0 x2 link. Why take a seemingly backward step on the interface of an SSD? Several reasons actually. Halving the number of lanes makes for a simpler SSD controller design, which lowers cost. Power savings are also a factor, as driving a given twisted pair lane at PCIe 3.0 speeds draws measurable current from the host and therefore adds to the heat production of the SSD controller. We recently saw that a PCIe 3.0 x2 can still turn in respectable performance despite lower bandwidth interface, but how far can we get the price down when pairing that host link with some NAND flash?

180305-155833.jpg

Enter the MyDigitalSSD SBX series. Short for Super Boot eXpress, the aim of these parts is to offer a reasonably performant PCIe NVMe SSD at something closer to SATA SSD pricing.

Specifications:

  • Physical: M.2 2280 (single sided)
  • Controller: Phison E8 (PS5008-E8)
  • Capacities: 128GB, 256GB, 512GB, 1TB
  • PCIe 3.0 x2, M.2 2280
  • Sequential: Up to 1.6/1.3 GB/s (R/W)
  • Random: 240K+ / 180K+ IOPS (R/W)
  • Weight: 8g
  • Power: <5W

Packaging:

The MyDigitalDiscount guys keep things extremely simple with their SSD packaging, which is eaxctly how it should be. It doesn't take much to package and protect an M.2 SSD, and this does the job just fine. They also include a screwdriver and a screw just in case you run into a laptop that came without one installed.

180305-155754.jpg

Read on for our full review of all capacities of the MyDigitalSSD SBX lineup!

Mid-octane Optane, Intel's 800P series

Subject: Storage | March 9, 2018 - 05:08 PM |
Tagged: ssd, PCIe 3.0 x2, Optane, NVMe, Intel, Brighton Beach, 800p, 58GB, 3D XPoint, 118GB

The price of the 480GB 900P is somewhat prohibitive but the small size of the 32GB gumstick also causes one pause; hence the 800P family with a 58GB and a 118GB model.  They bear price tags of $130 and $200, as you may remember from Al's review.  The Tech Report also had a chance to test these two Optane sticks out, with some tests not covered in our review, such as their own real world copying benchmark.  If you are looking for a second opinion, drop by and take a look.

drives.jpg

"Intel's duo of Optane SSD 800P drives promises the same blend of impressively-low latency and performance consistency as its larger Optane devices at a price more builders can afford. We ran these drives through our storage-testing gauntlet to see whether they can make a name for themselves as primary storage."

Here are some more Storage reviews from around the web:

Storage

Subject: Storage
Manufacturer: Intel

Introduction, Specifications and Packaging

Introduction:

Intel has wanted a 3D XPoint to go 'mainstream' for some time now. Their last big mainstream part, the X25-M, launched 10 years ago. It was available in relatively small capacities of 80GB and 160GB, but it brought about incredible performance at a time where most other early SSDs were mediocre at best. The X25-M brought NAND flash memory to the masses, and now 10 years later we have another vehicle which hopes to bring 3D XPoint to the masses - the Intel Optane SSD 800P:

180307-190822.jpg

Originally dubbed 'Brighton Beach', the 800P comes in at capacities smaller than its decade-old counterpart - only 58GB and 118GB. The 'odd' capacities are due to Intel playing it extra safe with additional ECC and some space to hold metadata related to wear leveling. Even though 3D XPoint media has great endurance that runs circles around NAND flash, it can still wear out, and therefore the media must still be managed similarly to NAND. 3D XPoint can be written in place, meaning far less juggling of data while writing, allowing for far greater performance consistency across the board. Consistency and low latency are the strongest traits of Optane, to the point where Intel was bold enough to launch an NVMe part with half of the typical PCIe 3.0 x4 link available in most modern SSDs. For Intel, the 800P is more about being nimble than having straight line speed. Those after higher throughputs will have to opt for the SSD 900P, a device that draws more power and requires a desktop form factor.

Specifications:

  • Capacities: 58GB, 118GB
  • PCIe 3.0 x2, M.2 2280
  • Sequential: Up to 1200/600 MB/s (R/W)
  • Random: 250K+ / 140K+ IOPS (R/W) (QD4)
  • Latency (average sequential): 6.75us / 18us (R/W) (TYP)
  • Power: 3.75W Active, 8mW L1.2 Sleep

Specs are essentially what we would expect from an Optane Memory type device. Capacities of 58GB and 118GB are welcome additions over the prior 16GB and 32GB Optane Memory parts, but the 120GB capacity point is still extremely cramped for those who would typically desire such a high performing / low latency device. We had 120GB SSDs back in 2009, after all, and nowadays we have 20GB Windows installs and 50GB game downloads.

Before moving on, I need to call out Intel on their latency specification here. To put it bluntly, sequential transfer latency is a crap spec. Nobody cares about the latency of a sequential transfer, especially for a product which touts its responsiveness - something based on the *random* access latency, and the 6.75us figure above would translate to 150,000 QD1 IOPS (the 800P is fast, but it's not *that* fast). Most storage devices/media will internally 'read ahead' so that sequential latencies at the interface are as low as possible, increasing sequential throughput. Sequential latency is simply the inverse of throughput, meaning any SSD with a higher sequential throughput than the 800P should beat it on this particular spec. To drive the point home further, consider that a HDD's average sequential latency can beat the random read latency of a top-tier NVMe SSD like the 960 PRO. It's just a bad way to spec a storage device, and it won't do Intel any favors here if competing products start sharing this same method of rating latency in the future.

Packaging:

Our samples came in white/brown box packaging, but I did snag a couple of photos of what should be the retail box this past CES:

180109-160835.jpg

180109-160912.jpg

Read on for our full review of the Intel Optane SSD 800P 58GB and 118GB!

MWC 2018: Western Digital Launches SN720 and SN520 M.2 NVMe SSDs

Subject: Storage | February 27, 2018 - 11:03 AM |
Tagged: wdc, WD, ssd, SN720, SN520, sandisk, NCMe, nand, M.2, BiCS, 2280, 2242, 2230

Western Digital launched a few new NVMe SSDs at Mobile World Congress today:

SN720-SN520.jpg

To the left we have the WD PC SN720, a PCIe 3.0 x4 NVMe SSD boasting speeds of up to 3.4GB/s and IOPS up to 500k. Available capacities are 1TB, 512GB, and 256GB. To the right we have the WD PC SN520, a more power efficient variant running on half of the PCIe lanes, and with specs coming in at roughly half of its faster brother. Capacities are also cut in half, with the range dropping to 512GB, 256GB, and 128GB. Interestingly, all capacities are available in three M.2 form factors (2280, 2242, and 2230).

We don't have a specific part number for the controller, but WD told us they are manufactured on a 28nm process, employ 8 NAND channels, and use DDR4 RAM (not DRAMless). The controller is optimized for interfacing with WD (/Toshiba) BiCS NAND flash, meaning these SSDs should prove to be a well integrated solution.

Press blast from WD appears after the break.

Author:
Subject: Storage, Mobile
Manufacturer: TEKQ

Delivering on the Promise of Thunderbolt 3

Despite the greatly increased adoption of Thunderbolt 3 over the previous 2 Thunderbolt standards, the market is still lacking actual devices that take advantage of the full 40Gbps bandwidth that Thunderbolt 3 offers.

External storage seems like a natural use of this PCI-E 3.0 x4 interface available with the Thunderbolt 3 standard, but storage devices that take advantage of this are few and far between. Most of the devices in the market currently are merely bridges for SATA M.2 drives to Thunderbolt 3, which would be limited by the SATA 6Gb/s interface.

DSC04654.JPG

However, this market gap seems poised to change. Today, we are taking a look at the TEKQ Rapide Thunderbolt 3 Portable SSD, which advertises sequential transfer speeds up to 2.3 GB/s Read and 1.3 GB/s Write.

DSC04662.JPG

Click here to find out more about the TEKQ Rapide Portable Thunderbolt 3 SSD!

Ryan's Law is not the only suggestion when it comes to SSDs

Subject: Storage | February 21, 2018 - 05:59 PM |
Tagged:

The SSD Review has posted a general guide on SSDs and how to ensure you pick the right one.  There are a huge variety of SSDs on the market now, from the original 2.5" SATA drives straight through to M.2 NVMe gum sticks.  Their guide will ensure you know the importance of matching your motherboard to an SSD, to ensure compatibility and performance as well as covering software and firmware updates.  For the more experience, they also delve into the various UEFI/BIOS settings you should look at to balance performance, stability and possibly battery life.  It is a bit of a long read but worth it if you are feeling confused

121A3439.jpg

"This report will be chronological, explaining what needs to be considered in your build including motherboard, SSD selection and installation, UEFI/BIOS settings, OS installation, and finally, SSD optimizations that should be considered."

Here are some more Storage reviews from around the web:

Storage

 

Samsung Mass Producing 256 GB eUFS For Automotive Industry

Subject: Storage | February 8, 2018 - 08:04 AM |
Tagged: UFS, Samsung, eUFS, embedded, automotive, adas, 256GB

Samsung announced yesterday that it has begun mass production of 256 GB eUFS (Embedded Universal Flash Storage) flash storage for embedded automotive applications. Doubling the capacity of the 128GB eUFS flash it announced last fall, the new embedded flash conforms to the newer JEDEC eUFS 3.0 standard including the new temperature monitoring and thermal throttling safety features which Samsung reportedly had a hand in developing. The new embedded storage is aimed at smart vehicles for use in driver assistance features (ADAS), infotainment systems, and next-generation dashboards.

Samsung_256GB_automotive_eUFS_M.jpg

The new eUFS 3.0 compliant flash is notable for featuring increased temperature ranges of between -40°C and 105°C for both operational and idle/power saving modes which makes it much better suited for use in vehicles where temperature extremes can be reach both from extreme weather and engine heat. Samsung compares its eUFS flash with traditional eMMC 5.1 storage which has a temperature range of only -25°C to 85°C when in use and -40°C to 85°C when in power saving mode.

Samsung’s eUFS can hit sequential read speeds of up to 850 MB/s and random read performance of up to 45,000 IOPS. Samsung did not specify write performance numbers but based on its other eUFS flash sequential and random writes should be in the neighborhood of 250 MB/s and 40,000 IOPS respectively. According to Samsung in its press material for 512GB eUFS for smartphones, the 256GB eUFS for the automotive market is composed of 8 stacks of 48-layer 256Gb V-NAND and a controller all packaged together to hit the 256GB storage capacity. Samsung has included a temperature sensor in the flash along with the ability for the controller to notify the host AP (application processor) at any pre-set temperature thresholds to enable the AP to downclock to lower power and heat to acceptable levels. The temperature monitoring hardware is intended to help protect the heat sensitive NAND flash from extreme temperatures to improve data reliability and longevity. The eUFS flash also features a “data refresh” feature that improves long term performance by relocating older data to less-often used cells. Embedded Universal Flash Storage (eUFS) is interesting compared to eMMC for more than temperatures though as it uses a dual channel LVDS serial interface that allows it to operate in full duplex mode rather than the half duplex mode of eMMC with its x8 parallel interface. This means that eUFS can be read and written to simultaneously and with the addition of command queueing, the controller is able to efficiently execute and prioritize read/write operations and perform error correction without involving the host processor and software.

I am looking forward to the advancements in eUFS storage and its use in more performant mobile devices and vehicles, especially on the low end in tablets and notebooks where eMMC is currently popular.

Source: Samsung