Subject: General Tech, Shows and Expos | June 8, 2011 - 07:48 PM | Scott Michaud
Tagged: razer, E3
You may have noticed a slew of gaming-related news flooding from various cracks in the internet this week. E3, the Electronic Entertainment Expo, is currently in progress in Los Angeles and much news spawned from its presence. PC Gamers are not left out of the expo, however, as companies like Razer announce their latest wares and technology. While a standard mouse is sufficient for most users there are some who desire extra sensitivity and extra buttons and those are precisely the customers for companies like Razer. Today, Razer announced that two of their upcoming mice would have two independent sensors, one optical and one laser, for enhanced tracking.
If they announce a five sensor Razer, The Onion won. (Image by Razer)
Razer listed a series of benefits to adding a second sensor to their next generation Mamba and Imperator mice:
- One sensor can calibrate the other to the surface you are using.
- The user will be able to determine how far away from the surface the mouse will stop tracking.
- Less latency tracking the surface you are operating on.
- Higher tracking precision.
While it is possible that you may appreciate those extra features on your mouse the largest factor in your gameplay will not be your hardware. The largest benefit I received switching from a three-button Microsoft mouse to a gaming mouse was the extra thumb buttons which I bound to an AutoHotkey script for single-button scrolling up and down large documents. (Available here if that's something you desire.) If these features speak to you however, check out Razer’s website.
Subject: General Tech, Shows and Expos | June 8, 2011 - 03:06 AM | Scott Michaud
Tagged: Nintendo, E3, amd
Nintendo’s hardware manufacturers have been pretty stable for the last two generations of consoles. Following the NEC and SGI pairing of the Nintendo 64, Nintendo roped in the talents of IBM and AMD to create the hardware for the GameCube. With the transition to the Wii, AMD and IBM remained as the hardware producers for Nintendo’s console and with the announcement of the Wii U (the successor to the Wii) that will still remain true.
HOOOOOOOO Wii! (Image by Nintendo)
AMD published a press release to state that the Wii U will contain AMD Radeon HD graphics to power Nintendo’s first entry to the high definition club. AMD touted their experience in multiple display support during their Wii U press release which would be suitable for the LCD monitors embedded in their controllers. IBM also released a statement confirming that they are shipping multi-core 45nm parts for the Nintendo’s next-generation console but did not state any more details such as how many cores or their clock speed.
Nintendo is rarely ever vocal about the specifications of their consoles and this version is no different. For their entire press conference Nintendo did not even show the console itself opting to focus on the controller and software. Beyond the controller, the hardware looks to be comparable to Microsoft and Sony’s offering from the limited info and screen shots we have seen. More info should come up as we approach the Wii U’s launch in a little over a year.
Subject: Mobile, Shows and Expos | June 5, 2011 - 12:19 AM | Ryan Shrout
Tagged: x101, ux01, notebook, laptop, computex, asus
ASUS had a lot of new and innovative products on display at Computex, but maybe none as interesting as these two notebooks. The UX21 was the flagship product for Intel's new "Ultrabook" category and while we have already posted about it earlier, I thought these new photos would be worth sharing.
The UX21 is an ultra-thin 1.7cm at its widest and weighs only 1.1 Kg fully loaded. It will include the ASUS "Instant On" technology, resuming the system in just 5 seconds and is claimed as the first notebooks with a SATA 6G SSD.
Sporting a new ULV Sandy Bridge Core i7 processor, this system won't skimp on performance either if it lives up to its claims.
More photos and information after the break!!
Subject: General Tech, Cases and Cooling, Shows and Expos | June 4, 2011 - 11:28 PM | Ryan Shrout
Tagged: computex, thermaltake, frio, level 10, power strip
Thermaltake had its standard booth array of cases, coolers, keyboards, mice, headphones, etc but also had some new items to show us when we stopped by. The first was a new "Snow Edition" of the Level 10 GT chassis we reviewed back in April.
The case remains mostly unchanged with some USB 3.0 ports up front, 5 "EasySwap" HDD bays and room for some very long graphics cards. The white color is not paint but rather plastic injected so you won't have to worry about the paint scratching off.
Next up is the Frio GT CPU cooler - yes the above image is showing you a freaking CPU COOLER. It supports up to 300 watts of cooling and does so with an enormous amount of heatpipes, fins and airflow. This cooler will be available in Q4 and should cost you under $100.
Under the two big collections of fins you can see the heatpipes that move the energy from the CPU cores. Obviously you are going to need to check out your case and motherboard dimensions before picking up a cooler like this as I imagine there are going to be quite a few configurations that are incompatible.
Thermaltake is also going into the self-contained water cooling direction as well with the internally designed and built BigWater A80. Thermaltake claims this device will get better results than the competition by including some interesting airflow modifications. Expect this to be very price competitive and be available in Q3.
A big surprise at the booth was new USB-controlled power strip called the "Wireless USB Control Series". Besides offering some convenient USB outlets directly on the power strip, this surge protector also has a USB powered remote control that will turn on and off the "Energy Saver" ports with the push of a button.
The remote sits in a little stand on top of your desk so you can power offer your display, printer or other devices all at once and without reaching behind anything. For those of you that want to go green then this will allow you to do so for a modest cost of $30-40 later this year.
Subject: Motherboards, Shows and Expos | June 4, 2011 - 10:42 PM | Ryan Shrout
Tagged: x79, fusion, ECS, e-350, computex, 990fx
ECS, aka Elitegroup, had a large booth at Computex that focused more on its ODM aspects than consumer aspects, but there were still a couple of interesting designs to look at.
The board we spotted was the new A990FXM-A motherboard that is of course based on the latest 990FX chipset from AMD. Supporting the AM3+ processor socket and thus the pending AMD Bulldozer processors, the 990FX is going to be a long term product rather than a short term. One interesting addition to the board is found on the chipset heatsink that has a temperature reactive plastic on it that will turn from grey to orange-ish as the ambient case temperature increases. This could be a great feature to easily gauge the heat level inside a windowed case.
Also an interesting move, ECS has elongated the receptacle on the 8-pin CPU power connection to make it easier to plug in and to remove. If you have ever experienced a pinched finger or sliced finger nail from trying to reach down and unplug an ATX connector, you will see this as a nice addition.
ECS also had its X79 motherboard variant on display, showing the company's readiness for the pending Sandy Bridge-E release.
Also on the motherboard wall was the upcoming A75F-A with support for the AMD Llano Fusion-based processors that should be ready later in the summer.
Finally, a motherboard that we have just recently received for review purposes, the HDC-I is an AMD E-350 or E-240 Zacate platform mini-ITX form factor. This solution might be a great option for users looking to build an HTPC box so be sure you check out our full review coming shortly.
Subject: Cases and Cooling, Shows and Expos | June 3, 2011 - 12:15 AM | Ryan Shrout
Tagged: performance series, p280, computex, antec
Upstairs at the Antec booth at Computex 2011, a new case sat awaiting our eyes and cameras called the Performance Series P280. A successor to the long-adored P180 case, the P280 will offer a host of tweaks and new features while maintaining a price point of about $130 on the street.
The fit and finish of the P280 should look familiar to anyone that has laid eyes on the P180. This time Antec has added two internal USB 3.0 ports in addition to a pair of USB 2.0 ports on the front panel.
The door on this case has the same over-swing as the P180 to completely fold away on the side if needed. There are three 5.25-in bays and a dual fan removable filter.
On the top of the case are pair of fans that use the newer rubber grommet style connection to lessen any kind of noise or rattle from them.
Both doors (and the top) of the P280 are lined with a very heavy compressed plastic that is used as a sound dampening device. Antec claims this is more effective than the foam insulation siding that many case vendors are currently using or that Antec uses on the P180.
Hit the "Read More" link for more photos and details on Antec's P280!!
Subject: General Tech, Shows and Expos | June 2, 2011 - 11:59 AM | Jeremy Hellstrom
Tagged: windows 8, computex
There is a lot of buzz after the unveiling of Window 8 to a select few at Computex. VR-Zone has a nice series of pictures as well as about 20 minutes of video footage from the preview event. AnandTech focused on the ARM version and the new filesystem, while Engadget were content to delve even deeper into the ARM support offered by Win8. ExtremeTech was more interested in the browser side, examining IE10 and the future Java and HTML5 as well as looking at the touch interface abilities.
"VR-Zone was in attendance for this historic Windows 8 unveiling event to selected partners and press at W Hotel Taipei, COMPUTEX 2011. Microsoft showed off its new Windows 8 UI design and a few x86/ARM prototype devices from its partners."
Here is some more Tech News from around the web:
- Bulldozer delayed and not delayed @ SemiAccurate
- Qualcomm Uplinq 2011 Day One Keynote - Mobile is King @ AnandTech
- Texas Instruments announces a dual-core 1.8GHz OMAP4 system-on-chip @ The Inquirer
- Microsoft postpones IDP for 2 weeks to re-consult with chip players @ DigiTimes
- Creative Labs' Pure Wireless Modularity Event Coverage @ Tweaktown
- Computex 2011 - Shuttle PC @ TechwareLabs
- Computex Highlights - Day 2 @ Ninjalane
- G.Skill & ASUS Live Extreme Overclocking at Computex @ VR-Zone
- ZiiLABS demos JAGUAR 7 and JAGUAR 10 Honeycomb Tablets @ VR-Zone
- AMD E-450 APU Spotted At Computex @ VR-Zone
- Hardware firms are tight-lipped on Acer’s 'troublesome Microsoft' comments @ The Inquirer
- The crooks who created modern wiretapping law @ Ars Technica
- Wave of Trojans breaks over Android @ The Register
- A Chance to Win a Gigabyte GTX 560 Overclock @ Bjorn3D
- Memorial Day Giveaway @Hi Tech Legion
Subject: Motherboards, Shows and Expos | June 2, 2011 - 05:13 AM | Ryan Shrout
Tagged: X58, overclocking, gigabyte, computex
Releasing a motherboard based on the X58 chipset at this point might seem odd, but when you can offer a unique take on the overclocking market you might just find a niche. Gigabyte is hoping that is the case with the new X58A-OC model that is going to be priced very competively thanks in large part to the removal of many features.
The orange and black color scheme on the board is actually pretty unique while the layout is setup in a way for quad-GPUs - you are going to need that to break those overclocking records.
In the top right hand corner there are a host of overclocking specific features. The "4G" button will automatically overclock basically any Nehalem processor to something above 4.0 GHz while the Gear button will decrease the size of the increments available to the user on voltage to the processor. The ratio and frequency +/- buttons are going to be of great use for overclocking a system on the fly without having to go through the trouble of entering a BIOS. Don't forget you have your power and reset buttons and voltage monitoring leads here too.
Where Gigabyte saves a bit of money is with the non-overclocking features; things like eSATA and high-end audio are left out so that the even the classic external connection space is pretty bare.
You will also notice near the SATA data connections some SATA-style power connectors as well. These are used to supply extra voltage to the PCI Express connections for overclocking and pushing quad graphics cards.
Subject: Motherboards, Shows and Expos | June 2, 2011 - 04:52 AM | Ryan Shrout
Tagged: ssd, socket 2011, llano, intel ssd, gigabyte, computex, APU
We stopped by the Gigaybte booth during Computex 2011 this week and found a host of new motherboards that range from the mainstream to the ultra-extreme.
First up is the A75-UD4H that supports the new AMD FM1 socket and the upcoming AMD Llano processor. Even though the APU will have integrated graphics on die, the Gigabyte board support AMD Dual Graphics technology and CrossFire multi-GPU solutions in conjunction with 8 USB 3.0 ports.
The board will include output connections of VGA, DVI, HDMI and DisplayPort along with size USB ports, four of which are USB 3.0.
The Z68XP-UD3 motherboard is one that will be offered in two different ways: one with an SSD and one without. The "iSSD" model will actually include an mSATA Intel 20GB SLC SSD and should come in at a cost of under $250. Considering the Larson Creek drive will cost you anywhere from $90-110 on its own, the combination of a Z68 motherboard and SSD is actually very price competitive. Plus, you get the convenience of having the SSD on the motherboard without it taking up a 3.5-in or 2.5-in drive bay.
For those that choose to get the lower cost board without the included Intel SSD you will be able to choose from several other newcomers to the mSATA form factor including Kingston and OCZ.
Of course we had to take a look at the Socket 2011 motherboard, the X79A-UD3 with support for the upcoming Intel Sandy Bridge-E processor. According to the slide information this will include a new version of the SSD caching technology called RSTe (Rapid Storage Technology Enterprise) with support for USB 3.0 and quad-channel DDR3 memory.
For those that haven't seen, here is a close up of the Socket 2011 in all its glory - that's a lot of pins!!
Subject: Processors, Shows and Expos | June 1, 2011 - 09:28 AM | Ryan Shrout
Tagged: trinity, llano, fusion, computex, bulldozer, APU, amd
While talking up the new 900-series of chipset and the branding for the upcoming AMD Llano APU launch, AMD did surprise us by showing off a bit more of the future than typical. Rick Bergman, general manager of the AMD Product Group, pulled a Trinity-based APU out of his pocket to demonstrate the conviction of staying on a "one-APU-per-year" cycle in the years to come.
While it looks just like any other AMD processors from a distance, this Trinity APU is based on the Bulldozer x86 architecture (which will see the first release as a CPU only later this year) and combines some amount of SIMD-units (aka Radeon cores) for a CPU/GPU combo. This will be the part that succeeds Llano, due out in a few short days.
This roadmap shows the cadence of once a year will be the norm for AMD going forward and that AMD plans to introduce an APU for the tablet market sometime in 2012. It will be interesting to see how late to the game AMD is in this arena and if they can compete with what ARM is doing or even what Intel will be doing with Medfield.