Subject: General Tech, Shows and Expos | March 6, 2015 - 03:57 PM | Scott Michaud
Tagged: xbox one, xbox, microsoft, gdc 15, GDC, controller
During his keynote speech, Phil Spencer of Microsoft announced a wireless adapter for PC. It can apparently be used to connect any wireless Xbox One peripheral on Windows 10. If you watch the presentation, the statement occurred at about 36 minutes and 30 seconds in. It was just a brief acknowledgement of its existence this year.
A similar device existed for the Xbox 360, pictured above, and I used it heavily with controller-friendly games (until the adapter died abruptly). I was not a fan of the directional pad, of course, but the rest of the controller suited the games that I play without a mouse and keyboard. I also used the adapter with the Xbox 360 wireless headset, which was surprisingly good (especially at removing speaker noise).
On the same day, Neowin acquired a leak that claims the company is looking to create a new Xbox One controller. They expect that, if the project doesn't get killed internally, we will see the new controller at E3 2015 in June. The design is supposed to focus on first person shooters and driving titles, but nothing else is known about it. We'll see.
Subject: General Tech, Shows and Expos | March 5, 2015 - 10:40 PM | Scott Michaud
Tagged: valve, source engine, Source 2, gdc 15, GDC
At the Game Developers Conference, Valve has formally announced the Source 2 engine and that it would be free for content developers. At the same time, they committed to releasing a version of it that is compatible with Vulkan, the graphics API from the Khronos Group that we have been talking about a lot over the last couple of days. Of course though, free can mean many things. As it turns out, there is one string attached: the game must be made available on Steam at launch. It can be available elsewhere too, but Steam must be one of the launch retailers.
I do wonder what will happen if someone makes a title that Steam refuses to publish. Of course, the natural thought is “What if Valve refuses to publish for content reasons?” That is an interesting thought, and maturity is one area that many other engines (like Unreal) do not restrict, but it is not the only concern (and Gabe Newell is quite laissez-faire with his -- albeit loosely defined -- content guidelines). What if your content simply does not make it on Steam? For instance, with is someone creates a title in Source 2 and has a failed attempt at Greenlight because it was unpopular? Are you then unable to publish your content through alternative channels, too? This seems like something that Valve will need to provide a little clarification on.
Try as I might, I could not find a release date for Source 2, however. It will arrive when it does.
Subject: General Tech, Graphics Cards, Shows and Expos | March 4, 2015 - 05:52 PM | Scott Michaud
Tagged: GDC, gdc 15, nvidia, epic games, ue4, unreal engine 4, PhysX, apex
NVIDIA and Epic Games have just announced that Unreal Engine 4 developers can view and modify the source of PhysX. This also includes the source for APEX, which is NVIDIA's cloth and destruction library. It does not include any of the other libraries that are under the GameWorks banner, but Unreal Engine 4 does not use them anyway.
This might even mean that good developers can write their own support for third-party platforms, like OpenCL. That would probably be a painful process, but it should be possible now. Of course, that support would only extend to their personal title, and anyone who they share their branch with.
If you are having trouble finding it, you will need to switch to a branch that has been updated to PhysX 3.3.3 with source, which is currently just “Master”. “Promoted” and earlier seem to be back at PhysX 3.3.2, which is still binary-only. It will probably take a few months to trickle down to an official release. If you are still unable to find it, even though you are on the “Master” branch, the path to NVIDIA's source code is: “Unreal Engine/Engine/Source/ThirdParty/PhysX/”. From there you can check out the various subdirectories for PhysX and APEX.
NVIDIA will be monitoring pull requests sent to that area of Unreal Engine. Enhancements might make it back upstream to PhysX proper, which would then be included in future versions of Unreal Engine and anywhere else that PhysX is used.
In other news, Unreal Engine 4 is now free of its subscription. The only time Epic will ask for money is when you ship a game and royalties are due. This is currently 5% of gross revenue, with the first $3000 (per product, per calendar quarter) exempt. This means that you can make legitimately free (no price, no ads, no subscription, no microtransactions, no Skylander figurines, etc.) game in UE4 for free now!
Subject: General Tech, Graphics Cards, Shows and Expos | March 3, 2015 - 03:37 PM | Scott Michaud
Tagged: vulkan, Mantle, Khronos, glnext, gdc 15, GDC, amd
Neil Trevett, the current president of Khronos Group and a vice president at NVIDIA, made an on-the-record statement to acknowledge the start of the Vulkan API. The quote came to me via Ryan, but I think it is a copy-paste of an email, so it should be verbatim.
Many companies have made great contributions to Vulkan, including AMD who contributed Mantle. Being able to start with the Mantle design definitely helped us get rolling quickly – but there has been a lot of design iteration, not the least making sure that Vulkan can run across many different GPU architectures. Vulkan is definitely a working group design now.
So in short, the Vulkan API was definitely started with Mantle and grew from there as more stakeholders added their opinion. Vulkan is obviously different than Mantle in significant ways now, such as its use of SPIR-V for its shading language (rather than HLSL). To see a bit more information, check out our article on the announcement.
Update: AMD has released a statement independently, but related to Mantle's role in Vulkan
Who Should Care? Thankfully, Many People
The Khronos Group has made three announcements today: Vulkan (their competitor to DirectX 12), OpenCL 2.1, and SPIR-V. Because there is actually significant overlap, we will discuss them in a single post rather than splitting them up. Each has a role in the overall goal to access and utilize graphics and compute devices.
Before we get into what everything is and does, let's give you a little tease to keep you reading. First, Khronos designs their technologies to be self-reliant. As such, while there will be some minimum hardware requirements, the OS pretty much just needs to have a driver model. Vulkan will not be limited to Windows 10 and similar operating systems. If a graphics vendor wants to go through the trouble, which is a gigantic if, Vulkan can be shimmed into Windows 8.x, Windows 7, possibly Windows Vista despite its quirks, and maybe even Windows XP. The words “and beyond” came up after Windows XP, but don't hold your breath for Windows ME or anything. Again, the further back in Windows versions you get, the larger the “if” becomes but at least the API will not have any “artificial limitations”.
Outside of Windows, the Khronos Group is the dominant API curator. Expect Vulkan on Linux, Mac, mobile operating systems, embedded operating systems, and probably a few toasters somewhere.
On that topic: there will not be a “Vulkan ES”. Vulkan is Vulkan, and it will run on desktop, mobile, VR, consoles that are open enough, and even cars and robotics. From a hardware side, the API requires a minimum of OpenGL ES 3.1 support. This is fairly high-end for mobile GPUs, but it is the first mobile spec to require compute shaders, which are an essential component of Vulkan. The presenter did not state a minimum hardware requirement for desktop GPUs, but he treated it like a non-issue. Graphics vendors will need to be the ones making the announcements in the end, though.
Subject: General Tech, Systems, Shows and Expos | March 1, 2015 - 11:07 PM | Scott Michaud
Tagged: spectre x360, spectre, mwc 15, MWC, hp, Broadwell
HP announced their updated Spectre x360 at Mobile World Congress. Like the Lenovo Yoga, it has a hinge that flips the entire way around, allowing the laptop to function as a 13.3-inch tablet with a 1080p, IPS display. There are two stages between “tablet” and “laptop”, which are “stand” and “tent”. They are basically ways to prop up the touch screen while hiding the keyboard behind (or under) the unit. The stand mode is better for hands-free operation because it has a flat contact surface to rest upon, while the tent mode is probably more sturdy for touch (albeit rests on two rims). The chassis is entirely milled aluminum, except the screen and things like that of course.
The real story is the introduction of Core i-level Broadwell. The 12.5-hour battery listing in a relatively thin form-factor can be attributed to the low power requirements of the CPU and GPU, as well as its SSD (128GB, 256GB, or 512GB). RAM comes in two sizes, 4GB or 8GB, which will depend slightly on the chosen processor SKU.
Prices start at $899 and most variants are available now at HP's website.
Subject: General Tech, Mobile, Shows and Expos | March 1, 2015 - 09:46 PM | Scott Michaud
Tagged: webOS, smartwatch, mwc 15, MWC, LG
A while ago, LG licensed WebOS from HP for use in their smart TVs and, as we found out during CES, smart watches.
The LG Urbane LTE is one such device, and we can finally see it in action. It is based around (literally) a circular P-OLED display (320 x 320, 1.3-inches, 245 ppi). Swirling your finger around the face scrolls through the elements like a wheel, which should be significantly more comfortable to search through a large list of applications than a linear list of elements -- a lot like an iPod (excluding the Touch and the Shuffle). That said, I have only seen other people use it.
The SoC is a Qualcomm Snapdragon 400, clocked at 1.2 GHz. It supports LTE, Wireless-N, Bluetooth 4.0LE, and NFC. It has 1 GB of RAM, which is quite a bit, and 4GB of permanent storage, which is not. It also has a bunch of sensors, from accelerometers and gyros to heart rate monitors and a barometer. It has a speaker and a microphone, but no camera. LG flaunts a 700 mAh battery, which they claim is “the category's largest”, but they do not link that to an actual amount of usage time (only that it “go[es] for days in standby mode”).
Video credit: The Verge
Pricing has not yet been announced, but it should hit the US and Europe before May arrives.
Subject: General Tech, Mobile, Shows and Expos | March 1, 2015 - 05:16 PM | Scott Michaud
Tagged: MWC, mwc 15, GDC, gdc 15, htc, valve, vive, vive vr, Oculus
Mobile World Congress (MWC) and Game Developers Conference (GDC) severely overlap this year, and not just in dates apparently. HTC just announced the Vive VR headset at MWC, which was developed alongside Valve. The developer edition will contain two 1200x1080 displays with a 90Hz refresh rate, and it will launch this spring. The consumer edition will launch this holiday. They made sure to underline 2015, so you know they're serious. Want more information? Well that will be for Valve to discuss at GDC.
The confusing part: why is this not partnered with Oculus? When Michael Abrash left Valve to go there, I assumed that it was Valve shedding its research to Facebook's subsidiary and letting them take the hit. Now, honestly, it seems like Facebook just poached Abrash, Valve said “oh well”, and the two companies kept to their respective research. Who knows? Maybe that is not the case. We might find out more at GDC, but you would expect that Oculus would be mentioned if they had any involvement at all.
Valve will host an event on the second official day of GDC, March 3rd at 3pm. In other words, Valve will make an announcement on 3/3 @ 3. Could it involve Left 4 Dead 3? Portal 3? Will they pull a Crytek and name their engine Source 3? Are they just trolling absolutely everyone? Will it have something to do with NVIDIA's March 3rd announcement? Do you honestly think I have any non-speculative information about this? No. No I don't. There, I answered one of those questions.
Subject: Shows and Expos | February 24, 2015 - 11:14 PM | Morry Teitelman
Tagged: QuakeCon 2015, quakecon, id software
Courtesy of ZeniMax Media
The yearly gaming mecca known as QuakeCon, featuring the biggest BYOC (bring your own computer) LAN in the great state of Texas, is set to kick-off starting July 23 through the 26. What you didn't know is that the QuakeCon team announced the registration dates for the event. Like last year, all pre-registration spots in the BYOC will be pay-for only with no First-Come-First-Served spots available.
This year, there will be a total of five registration rounds offered:
- BYOC Select-a-Seat with UAC Command Center Seating
- 32 packages, $500 per package
- Wednesday, March 4 at 7pm CST / 8PM EST
- BYOC Select-a-Seat with QuakeCon done Quick
- 300 packages, $175 per package
- Wednesday, March 11 at 7pm CST / 8PM EST
- BYOC Select-a-Seat + Swag Pack
- 500 packages, $170 per package
- Wednesday, March 18 at 7pm CST / 8PM EST
- BYOC Select-a-Seat
- 1600 packages, $55 per package
- Wednesday, March 25 at 7pm CST / 8PM EST
- Swag Pack
- 50 packages, $125 per package
- Wednesday, April 1 at 7pm CST / 8PM EST
If you a familiar with the QuakeCon pay-for packaging strategies, most of the packages look familiar. The newest package offering is the UAC Command Center Seating package, featuring a VIP seat in the NOC with direct access for your system to the backbone and guaranteeing you the fastest network access at the event.
Subject: General Tech, Shows and Expos | February 11, 2015 - 08:26 PM | Scott Michaud
Tagged: google io 2015, google io, google
Or is that Left Shark Eggs? Yup, pay attention near the end of the post for an Easter Egg.
Every year, Google hosts their I/O developer conference, which often involves the launching of new hardware and services. This year, it will take place on May 28th and May 29th. Registration to register will open on March 17th at noon ET and it will end on the 19th. If you do not get in, many keynotes and sessions will be broadcast over the internet... because it's Google.
Note how I said “Registration to register”? That was not a typo. You are putting your name into a randomizer that will select candidates to actually register and purchase their tickets. Last year, tickets sold out in less than an hour. Apparently Google believes that it is better for the tickets to go to the luckiest individuals, rather than the best F5ers.
I hope this made your day as bright as mine. Basically, I HOPE I RUINED YOUR DAY TOO!