Subject: Memory | February 6, 2015 - 08:40 PM | Tim Verry
Tagged: overclocking, kingston hyper x, kingston, ddr4, ces 20156, CES
Overclocker "Toppc" from MSI was able to crank a single stick of DDR4 memory to a world record 4,351 MHz at the International CES 2015 competition. Toppc paired the Kingston Predator DDR4 DIMM with an Intel Haswell-E Core i7-5960X processor and a MSI X99S Xpower AC motherboard. After disabling all but one CPU core and adding in copious amounts of liquid nitrogen, the 4GB memory module was overclocked to 4,351 MHz which was measured using CPU-Z (CPU-Z Validation) and verified with an oscilloscope (shown in the embedded video below).
This overclock is quite impressive even if it is not something you can run at home especially for DDR4 which is designed to use less power than DDR3. Out of the box the DIMMs are rated at up to 3,333 MHz which means they achieved an impressive 30.54% overclock (an increase of 1,018 MHz).
This kind of overclock will only result in marginal performance gains (at best) in everyday applications, but is still cool to see. Also, it surely won't hurt benchmark runs!
Subject: Memory | January 13, 2015 - 01:31 PM | Jeremy Hellstrom
Tagged: ddr4, ddr4-2800, corsair, Corsair Vengeance LPX, X99
With the release of the X99 chipset came the introduction of DDR4, which is not seeing the same uptake as DDR3 did at launch, though it is still selling well. Part of this may be the pricing, DDR3 was expensive when it first launched but even stalwart early adopters may balk at the $340 asking price for the Corsair Vengeance LPX 16GB 2800MHz. The other main reason for the mild reception is the minimal performance gains which DDR4 offers, you can see a slight difference in synthetic benchmarks but when it comes to gameplay the performance increase is minuscule for the price you pay. If you do have an X99 board then this kit is a good choice for you, not only can you often find similar kits on sale for significantly less that $300, Overclockers Club overclocked these DIMMs to 3200MHz at timings of 16-16-16-30. Check out their review here.
"Packed full of promise, the latest modules in the Vengeance series of Corsair's DDR4 memory lineup deliver excellent performance when tweaked to get the tightest timings. Out of the box they come with 16-18-18-36 primary timings using just 1.2v to run the modules. By tweaking the applied voltage a little bit you can get the timings much tighter at the rated speed and even when running at my max overclock of 3200MHz. At this speed I was able to run the timings at 15-15-15-28 2T using over 1.4v applied to the modules."
Here are some more Memory articles from around the web:
- Crucial DDR4-2133 32GB Memory Kit Review @ Hardware Canucks
- Corsair Vengeance LPX DDR4 2666MHZ 16GB Quad Channel Memory Kit @ Bjorn3D
- Corsair DDR4 16GB Vengeance LPX 2800C16 Memory Kit Review @ Madshrimps
- Avexir Core Series 1600MHz CL9 memories with orange LEDs @ HardwareOverclock
Subject: Memory | October 20, 2014 - 02:12 PM | Jeremy Hellstrom
Tagged: Vengeance LPX, corsair, Ripjaws 4, G.Skill, hyperx predator, kingston, ddr4, DDR4-3000
With the new DDR4 standard comes new speeds and of course updated branding from the major memory resellers. As it is brand new there is a possibility that some memory is better than others at this point, which is why Kitguru assembled three different kits to test. Corsair's Vengeance LPX, G.Skill's Ripjaws 4 and Kingston's HyperX Predator all have very similar specifications on paper though each has a distinctive look. Read on to find out if there is a brand that you should be looking for right now, or if it is price and availability which should drive your purchasing decision.
"One of the key technological advancements that the Haswell-E processors and Intel’s latest High-End Desktop (HEDT) platform iteration have brought into the consumer limelight is DDR4. We compare three 16GB quad-channel memory kits from Corsair, G.Skill, and Kingston, all running at 3000MHz. Is there a specific set of ‘go-to’ memory at this early point in the DDR4 life-cycle?"
Here are some more Memory articles from around the web:
- G.SKILL Ripjaws 4 16 GB 3000 MHz Kit (4x 4GB DDR4) @ techPowerUp
- Crucial Ballistix Sport DDR4 @ HardwareHeaven
- Corsair Vengeance LPX 16GB 2800MHz Quad Channel DDR4 Memory Kit @ eTeknix
- Kingston HyperX Predator 16GB 3000MHz Quad Channel DDR4 @ eTeknix
- Crucial Ballistix Sport XT 32GB 1866MHz Quad Channel DDR3 @ eTeknix
Subject: Memory | September 15, 2014 - 05:17 PM | Jeremy Hellstrom
Tagged: kingston, hyperx predator, DDR4-3000, ddr4
Ah DDR3, it has been a long and fruitful partnership and it is good to know you won't be going anywhere soon but you now have a younger sibling that is attracting a lot of attention. DDR4 has arrived, with a base clock of 2133MHz and many kits with higher frequencies also appearing for sale. The ~$350, 16GB Kingston HyperX Predator kit which Legit Reviews just reviewed comes with two XPM profiles, one @ 3000MHz with timings of 15-16-16-39 and one @ 2666MHz at 14-14-14-36 and they also tested the kit @ 2133MHz with the previous timings. As you read through the review you will notice that the synthetic benchmarks show much more drastic differences than do the gameplay tests, similar to what was seen with DDR3. As with the previous generation it looks as though tighter timings trump frequency in the majority of cases.
"Now that the Intel X99 chipset has been released along with the Intel Haswell-E processor series we have entered the era of DDR4 memory. There are many DDR4 memory kits on the market and right now you can find 16GB to 64GB kits of DDR4 memory ranging in speeds of 2133MHz to 3333MHz. The sheer number of kits on the market for the platform launch is rather impressive and luckily there are a good number of Intel X99 based motherboards that are ready to support DDR4 memory frequencies well beyond the JEDEC standard clock frequency of 2133MHz."
Here are some more Memory articles from around the web:
- G.SKILL Ripjaws 4 16GB DDR4 3000 MHz Memory Kit Review @ Legit Reviews
- G.Skill 16GB 2400MHz RipJaws 4 Quad Channel DDR4 @ eTeknix
- Crucial 32GB 2133MHz Quad Channel DDR4 @ eTeknix
- DDR4 Roundup featuring Corsair, Crucial and G.Skill @ HardwareHeaven
- G.Skill Ares 8GB 2400MHz Dual Channel DDR3 @ eTeknix
Subject: Motherboards, Processors, Chipsets, Memory, Storage | September 5, 2014 - 01:21 PM | Ryan Shrout
Tagged: X99-Deluxe, SSD 730, Intel, Haswell-E, ddr4, asus, 5960X
Okay, I'll be the first to admit that I didn't know what I was getting into. When a couple of packages showed up at our office from Intel with claims that they wanted to showcase the new Haswell-E platform...I was confused. The setup was simple: turn on cameras and watch what happens.
So out of the box comes...a containment chamber. A carefully crafted, wood+paint concoction that includes lights, beeps, motors and platforms.
Want to see how Intel promotes the Core i7-5960X and X99 platform? Check out this video below.
Our reviews of products included in this video:
Subject: Motherboards, Memory | August 29, 2014 - 12:25 PM | Jeremy Hellstrom
Tagged: X99, ddr4, corsair, asus, Dominator Platinum, X99-Deluxe, Rampage V Extreme
PAX Prime, Seattle —August 29, 2014 — Corsair, a worldwide leader in high-performance PC components and ASUS a worldwide leader in motherboards, today announced the availability of the Corsair Dominator Platinum DDR4 memory kits in 3300MHz, 3200MHz and 3000MHz speeds – the world’s fastest production memory kits. Corsair developed the new high-speed DDR4 memory in close collaboration with ASUS, tuning and validating the memory timings to take advantage of the optimized DRAM layout and UEFI firmware of ASUS’s new X99 motherboards. The new Dominator DDR4 memory kits, when paired with the ASUS X99 Deluxe and Rampage V Extreme motherboards, creates some of the fastest, most stable enthusiast PC platforms available for the new Intel Core i7 processors (codenamed Haswell-E).
“Our rigorous validation with ASUS has enabled us to make Dominator Platinum 3300MHz the fastest desktop DDR4 memory available at launch,” said Thi La, Chief Operating Officer at Corsair. “Our OC team and engineers are excited to see such performance headroom the new Intel platform and are looking forward to releasing even faster kits in the near future.”
“It is always exciting when two companies renowned for being at the forefront of innovation and pushing performance boundaries work together to create new products for end-users. The combination of ASUS X99 motherboards with Corsair Dominator Platinum ushers in a new era of memory performance and stability for enthusiasts,” Joe Hsieh, ASUS Corporate Vice President and General Manager of the Motherboard and Desktop System Business Unit.
Corsair Dominator Platinum DDR Memory
Dominator Platinum memory kits have a striking industrial design for good looks, patented DHX technology for cooler operation, user-swappable colored “light pipes” for customizable downwash lighting, and Corsair Link compatibility for real-time temperature monitoring. Dominator Platinum memory is built with hand-screened ICs, undergoes rigorous performance testing, and incorporates state-of-the-art cooling for reliable performance in demanding environments.
The ASUS X99-Deluxe and Rampage V Extreme
The ASUS X99-Deluxe and Rampage V Extreme feature an enhanced CPU socket and DRAM trace layout to improve signal integrity, providing increased overclocking headroom and stability over reference designs. This is coupled with a highly customized and refined UEFI firmware that allows easy setup and tweaking – perfect for getting the most from Corsair Dominator Platinum memory.
Availability and Warranty
The DDR4 memory kits are available in Corsair’s Vengeance LPX and Dominator Platinum lines. The memory kits are available immediately via Corsair’s worldwide network of authorized distributors and resellers and are backed by a lifetime warranty.
The ASUS X99-Deluxe and Rampage V Extreme motherboards are available now at ASUS authorized distributors and resellers worldwide. Both motherboards are covered by a three year warranty with advanced replacement in the first year.
Subject: Editorial, General Tech, Memory | August 20, 2014 - 04:08 PM | Jeremy Hellstrom
Tagged: Haswell-E, G.Skill, ddr4-2800, ddr4-2666, ddr4-2400, ddr4-2133, ddr4, crucial, corsair
DDR4 is starting to arrive at NewEgg and some kits are actually in stock for those who want to be the first on their block to have these new DIMMs and can remortgage their home. The price of Haswell-E CPUs and motherboards is as of yet unknown but looking over the past few years of Intel's new processors you can assume the flagship processor will be around $999.99 with the feature rich motherboards starting around $200 and quickly raising from there.
At the 16GB mark you have more choices with Corsair joining in and a range of speeds that go up to DDR4-2800 as well as your choice of a pair of 8GB DIMMs or four 4GB DIMMs. Corsair was kind enough to list the timings, the DDR4-2666 @ 15-17-17-35 and the DDR4-2800 @ 16-18-18-36 though you will certainly pay a price for the RAM with the highest frequencies.
For those on a budget it would seem like waiting is your best choice, especially as Amazon is offering a limited selection of the new kits, as there is only a single 8GB kit from Crucial although you can buy two of the single DIMMs without heatspreaders for $110.
Intel product releases are always dearly priced, the introduction of a new generation of RAM is both exciting and daunting. You will see power reductions, base frequencies that were uncommon in DDR3 and very likely an increase in the ability to overclock these DIMMs but it is going to cost you. If Haswell-E is in your sights you should start planning on how to afford replacing your CPU, motherboard and RAM at the same time as this is no refresh this is a whole new product line.
Subject: Memory | August 15, 2014 - 12:24 PM | Jeremy Hellstrom
Tagged: ddr4, corsair, Vengeance LPX, Dominator Platinum
FREMONT, California — August 14, 2014 — Corsair, a leader in high-performance PC hardware, today announced the availability of Corsair Vengeance LPX and Dominator Platinum lines of high-speed DDR4 computer memory. This new generation of memory ushers in a new age of ultrafast computing with optimizations such as increased DRAM bandwidth, higher bus frequencies, lower power usage, and higher reliability.
Corsair Vengeance LPX and Dominator Platinum DDR4 memory kits are validated with motherboard partners (ASUS, ASRock, EVGA, Gigabyte, and MSI) and use the new XMP 2.0 profile to deliver easy, reliable overclocking performance with the upcoming next-generation Intel® X99 platforms and Intel® Core™ i7 processors (codenamed Haswell-E). The Vengeance LPX and Dominator Platinum memory kits are supplied with a limited lifetime warranty.
Vengeance LPX memory is a new Corsair memory line designed for high-performance overclocking with a low-profile heatspreader is made of pure aluminum for faster heat dissipation and the eight-layer PCB helps manage heat and provides superior overclocking headroom. The memory kits are available in black, red, white, or blue so that enthusiasts, gamers, and modders can add a touch style to match the color scheme of their PC.
Like the DDR3 memory versions, the new Dominator Platinum DDR4 memory kits have a striking industrial design for good looks, patented DHX technology for cooler operation, user-swappable colored “light pipes” for customizable downwash lighting, and Corsair Link compatibility for real-time temperature monitoring. Dominator Platinum memory is built with hand-screened ICs, undergoes rigorous performance testing, and incorporates state-of-the-art cooling for reliable performance in demanding environments.
Vengeance LPX and Dominator Platinum DDR4 Specifications
- Unbuffered DDR4 SDRAM in 288-pin DIMM
- Capacities at launch: 8GB (2x4GB), 16GB (4x4GB), 32GB (4x8GB) and 64GB (8x8GB)
- Speeds at launch: 2666MHz, 2800MHz, and 3000MHz
- Intel XMP 2.0 (Extreme Memory Profile) support
DDR4 is faster. Even at the baseline speed of DDR4 delivers twice the bandwidth with 2133 MT/s (million transfers per second) compared with the base DDR3 1600 MT/s. With optimizations games and applications have the potential to load faster and run more smoothly.
DDR4 uses a lot less power and runs cooler.
With each new generation of CPU and GPU architecture, system power consumption and heat generation become more and more important. DDR4 modules operate at an ultra-low standard 1.2 volts compared to the 1.5 and 1.65 volts of DDR3 memory, allowing DDR4 memory to consume significantly less power and generate less heat.
DDR4 memory modules can get bigger.
DDR3 is limited to 8GB modules for a maximum of 32GB on standard four-socket motherboards. DDR4 will have the ability to enable 16GB per module by 2015. A motherboard with eight memory slots will be upgradeable to an amazing 128GB or DDR4 memory.
Pricing, Availability, and Warranty
Corsair Vengeance LPX Series and Dominator Platinum DDR4 memory kits will be available at the end of August from Corsair's worldwide network of authorized distributors and resellers. The Vengeance LPX and Dominator Platinum memory kits are supplied with a limited lifetime warranty and are backed up by Corsair's customer service and technical support.
Subject: Memory | August 12, 2014 - 02:09 PM | Jeremy Hellstrom
Tagged: XPG V3, DDR3 3100, adata
Currently available for a mere $870 the 8GB DDR3-3100 dual channel kit from ADATA with timings of 12-14-14-36 has to be among the most expensive consumer RAM available on the market. We can only hope that DDR4 does not arrive at a similar speed and price point but instead with slower clocked DIMMs at a more reasonable price and with improvements to performance. Legit Reviews' testing showed that these DIMMs offer almost no benefit over DDR3-1600 with tighter timings in real usage but you can get higher scores on synthetic benchmarks. If benchmarking better than the competition and swap-able heatspreaders with different colours is attractive to you then you could pick up these DIMMs, otherwise you really won't be getting value for your money.
"Gone are the days of being on the cutting edge of memory with DDR3 running at 2133MHz! These days running 2133MHz memory is pretty much considered the norm for a high end gaming rig. If you’re looking to be on the bleeding edge of memory speeds you’re going to be limited to only one or two kits. Today we have one of the fastest kits available on the market to put through the paces, the ADATA XPG V3 DDR3 3100MHz 8GB memory kit. Read on to see if this big dollar kit is worth nearly a thousand dollars."
Here are some more Memory articles from around the web:
- GeIL EVO POTENZA 16GB 2400MHz @ eTeknix
- Kingston HyperX Fury 8GB 1866MHz @ eTeknix
- Patriot Memory 8GB DDR3 1600MHz Viper 3 LP Memory Kit (PVL38G160C9K) Review @ Madshrimps
- GeIL DRAGON RAM 8GB 1600MHz @ eTeknix
Subject: General Tech, Motherboards, Memory | July 6, 2014 - 03:53 AM | Scott Michaud
Tagged: overclocking, memory, gigabyte
About a week ago, HWBOT posted a video of a new DDR3 memory clock record which was apparently beaten the very next day after the movie was published. Tom's Hardware reported on the first of the two, allegedly performed by Gigabyte on their Z97X-SOC Force LN2 Motherboard. The Tom's Hardware article also, erroneously, lists the 2nd place overclock (then 1st place) at 4.56 GHz when it was really half that, because DDR is duplex (2.28 GHz). This team posted their video with a recording of the overclock being measured by an oscilloscope. This asserts that they did not mess with HWBOT.
The now first place team, which managed 2.31 GHz on the same motherboard, did not go to the same level of proof, as far as I can tell.
This is the 2nd fastest overclock...
... but the fastest to be recorded with an oscilloscope that I can tell
Before the machine crashes to a blue screen, the oscilloscope actually reports 2.29 GHz. I am not sure why they took 10 MHZ off, but I expect it is because the system crashed before HWBOT was able to record that higher frequency. Either way, 2.28 GHz was a new world record, and verified by a video, whether or not it was immediately beat.
Tom's Hardware also claims that liquid nitrogen was used to cool the system, which brings sense to why they would use an LN2 board. It could have been chosen just for its overclocking features, but that would have been a weird tradeoff. The LN2 board doesn't have mounting points for a CPU air or water cooler. The extra features would have been offset by the need to build a custom CPU cooler, to not use liquid nitrogen with. It is also unclear how the memory was cooled, whether it was, somehow, liquid nitrogen-cooled too, or if it was exposed to the air.