Manufacturer: RockIt Cool

Introduction

Introduction

With the introduction of the Intel Kaby Lake processors and Intel Z270 chipset, unprecedented overclocking became the norm. The new processors easily hit a core speed of 5.0GHz with little more than CPU core voltage tweaking. This overclocking performance increase came with a price tag. The Kaby Lake processor runs significantly hotter than previous generation processors, a seeming reversal in temperature trends from previous generation Intel CPUs. At stock settings, the individual cores in the CPU were recording in testing at hitting up to 65C - and that's with a high performance water loop cooling the processor. Per reports from various enthusiasts sites, Intel used inferior TIM (thermal interface material) in between the CPU die and underside of the CPU heat spreader, leading to increased temperatures when compared with previous CPU generations (in particular Skylake). This temperature increase did not affect overclocking much since the CPU will hit 5.0GHz speed easily, but does impact the means necessary to hit those performance levels.

Like with the previous generation Haswell CPUs, a few of the more adventurous enthusiasts used known methods in an attempt to address the heat concerns of the Kaby Lake processor be delidding the processor. Unlike in the initial days of the Haswell processor, the delidding process is much more stream-lined with the availability of delidding kits from several vendors. The delidding process still involves physically removing the heat spreader from the CPU, and exposing the CPU die. However, instead of cooling the die directly, the "safer" approach is to clean the die and underside of the heat spreader, apply new TIM (thermal interface material), and re-affix the heat spreader to the CPU. Going this route instead of direct-die cooling is considered safer because no additional or exotic support mechanisms are needed to keep the CPU cooler from crushing your precious die. However, calling it safe is a bit of an over-statement, you are physically separating the heat spreader from the CPU surface and voiding your CPU warranty at the same time. Although if that was a concern, you probably wouldn't be reading this article in the first place.

Continue reading our Kaby Lake Relidding article!

Not a fan of RGB LEDs? NXZT's Aer F series has you covered!

Subject: Cases and Cooling | March 8, 2017 - 03:48 PM |
Tagged: nxzt, fan, Aer F

The new Aer F series from NZXT offer you the chance to add some colour to your system, without the glow of RGB emanating from your system. They will fit nicely on most radiators as well as being useful as case fans.  The Trims are available in red, white or blue and are compatible with both the Aer F series as well as the Aer P series which is already on the market.

aer f 140.png

The Aer F series operates at lower noise levels than the Aer P, at the sacrifice of air flow, most due to the fan speeds topping out at 1500RPM as opposed to 2000RPM.  You can order the new 120mm fans for $17.99 or $29.99 for a twin pack; the 140mm are $19.99 and $32.99 respectively.  The trims are sold separately at $5.99 for two trims.

aer f deets.PNG

Los Angeles, CA – March 7, 2017 – Continuing to deliver increased performance for PC gamers and builders everywhere, NZXT today announces the newest member of its Aer family of fans with Aer F.

Designed to maximize airflow, Aer F is engineered to move air efficiently, letting even the most powerful systems breath with ease. Featuring the same chamfered intake and exhaust and winglet-designed fan blades found in Aer P radiator fans, Aer F delivers powerful airflow with reduced drag, minimizing resistance and vibration. Like it’s Aer family counterparts, Aer F is made with long-lasting fluid dynamic bearings further enhancing their durability and cooling performance.

“Pushing PC gaming to its limits is very important to us at NZXT,” says Johnny Hou, NZXT’s founder and CEO. “Whether you are overclocking the latest processors or running two Geforce GTX 1080 Ti graphic cards in SLI, products like Aer F are designed to maximize performance without being intrusive. Having a PC running cool and quiet makes for a deeper more immersive gaming experience.”

Aer F main features:

  • PWM fan designed for better airflow and near-silent performance.
  • Winglet constructed fan blades minimize drag, improving overall cooling.
  • Patented fluid dynamic bearings (FDB) deliver long-lasting operation. (60,000 hours / 6 years)
  • Sleeved cables for easy and clean cable management.
  • Replaceable color trim choices give builders the flexibility to customize their builds (sold separately)

Silence and Cooling Optimized
With sleeved cables, vibration dampeners, chamfered-intake and exhaust, and winglet designed fan blades on the impeller; Aer F is designed and engineered from top-to-bottom to make sure gamers get the best cooling performance without compromising their gaming experience.

Built to Last
Patented fluid dynamic bearings, made from copper, gives Aer F the durability to perform for six years, staying relevant well beyond your next graphics card.

Color Your Way
Aer Trims, compatible with Aer F and Aer P, are available in Red, White, and Blue, enabling builders to color-coordinate their builds, their way. Aer Trims are sold separately.

Source: NZXT

Type A positive; CRYORIG's free conversion kits for AM4

Subject: Cases and Cooling | March 7, 2017 - 01:50 PM |
Tagged: ryzen, CRYORIG, amd, AM4

If you own a CRYORIG cooler, apart from the M9i, you can head to this page to request a free upgrade kit to support AM4 motherboards.  Depending on the cooler you purchased you will need to choose from one of four different kits and CRYORIG will send it off to you for free, no shipping or other fees required.

modles.PNG

You will need to produce either a product registration number or proof of purchase of your CRYORIG product as well as proof of purchase of an AMD Ryzen or AM4 motherboard.  The upgrade kits will ship out later this month and sometime in the latter half of the year CRYORIG will release four new coolers which natively support AM4, as well as previous AM3(+) boards.

ryzensupport.jpg

07.03.17 Taipei, Taiwan – With the much-anticipated release of the AMD Ryzen, CRYORIG prepares to launch a full line of AMD Ryzen dedicated coolers as well as simple upgrade kits for existing AMD compatible CRYORIG cooling products. Beginning from Type A to Type D, there will be a total of 4 different AM4 upgrade kits depending on the corresponding CRYORIG product. Natively supporting Ryzen dedicated version models will begin to release later in Q2 2017 and will consist of the full CRYORIG cooling portfolio.

CRYORIG’s four AM4 upgrade kits will be released beginning in late March and will be completely free of charge (including shipping) for existing users to apply for. Users will only need to provide a proof of purchase of the CRYORIG product (or product registration number), and a proof of purchase of an AMD Ryzen or AM4 CPU or Motherboard. Just fill out and supply all necessary info at www.cryorig.com/getam4.php, the kit will be sent directly to the provided address. Distributors and select channels will also have these kits available.

Beginning in Q2 2017, CRYORIG will start shipping dedicated Ryzen ready versions of CRYORIG’s full product line. Exact release dates will vary from model to model. The Ryzen Supported sticker will be found on all dedicated Ryzen ready coolers for easy identification, and indicates that no additional kits are required for Ryzen support.

 

Source: CRYORIG
Author:
Manufacturer: Riotoro

Introduction and Features

Introduction

Riotoro is a new player in the already crowded PC power supply market. Formed in 2014 and based in California, Riotoro originally started their PC hardware business with a focus on cases, mice, and LED fans targeted towards the gaming community. Now they are expanding their product offerings to include two new power supply lines, the Enigma and Onyx Series, along with two liquid CPU coolers and several RGB gaming keyboards. We will be taking a detailed look at Riotoro’s new Enigma 850W power supply in this review.

2-R850-diag.jpg

Riotoro announced the introduction of the three power supplies at Computex 2016: the Enigma 850W, Onyx 750W, and Onyx 650W. All three power supplies were developed in partnership with Great Wall and are based on new platforms designed to hit the sweet spot for practical real-world performance, reliability, and price. The Onyx line will initially be available in 650W and 750W models. The more up scale Enigma line will kick off with the 850W model.

The Riotoro Enigma 850W power supply is certified to comply with the 80 Plus Gold criteria for high efficiency, comes with semi-modular cables, and uses a quiet 140mm variable speed fan for cooling.

3-R850-front-cables.jpg

Riotoro Enigma 850W PSU Key Features:

•    850W Continuous DC output at up to 40°C
•    80 PLUS Gold certified for high efficiency
•    Semi-modular cables
•    Quiet 140mm cooling fan
•    Japanese made bulk (electrolytic) capacitors
•    Compatible with Intel and AMD processors and motherboards
•    Active Power Factor correction with Universal AC input (100 to 240 VAC)
•    Safety protections: OVP, UVP, OCP, OPP, and SCP
•    5-Year warranty
•    MSRP: $119.99 USD

Please continue reading our review of the Riotoro Enigma 850W PSU!!!

LEPA's Neopets, colourful coolers to take care of your system

Subject: Cases and Cooling | March 3, 2017 - 02:12 PM |
Tagged: lepa, NEOllusion RGB, air cooler, RGB

LEPA have launched a new series of air coolers, the NEOllusion RGB which comes with a remote control so you can create a fancy light show inside your case.  The screenshots at [H]ard|OCP show that the lights the heatsink produces are quite bright and will certainly be visible even from a distance.  For those of you who are more interested in cooling performance than pretty lights, the NEOllusion stands 126x40x161.7mm, with a 120mm fan and a recommended max TDP of 200W.  Tests show the cooler favours form over function, keeping temperatures in control but not offering competitive performance; it does prefer visual impact over audio effects as it is one of the quietest coolers [H] have tested.  If you are the type to desire a quiet light show in your case, check out the full review.

14858249220ZhLYFiAYf_1_1.png

"LEPA comes to us today with a new air cooler that is specifically focused on users that are looking for a little more bling inside their desktop computer build. And while really cool lights may or may not be your thing, we wanted to see just how the NEOllusion performed when it comes to its primary function, CPU cooling."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Wondering about upgrading your cooler mounts for Ryzen?

Subject: General Tech, Motherboards, Cases and Cooling | March 2, 2017 - 02:05 PM |
Tagged: AM4, ryzen, nzxt, fractal design, scythe

We have some good news from several companies about compatibility with that AM4 board you are hoping to set up.  NXZT have announced a program in which you can request a free AM4 mounting kit for your Kraken X62, X52, X42, X61, X41 or Kraken X31.  Just follow this link to apply for one, they will ship world wide starting on the 15th of March.  You will need to provide proof of purchase of both your AM4 motherboard and Kraken cooler.

nzxt.png

Fractal Design have a similar offer for owners of of their Kelvin series of coolers.  You can email their Support team for a bracket for your Kelvin T12, S24 or S36, make sure to attach proof of purchase of either a Ryzen processor or AM4 board.

fractals.jpg

Scythe is doing things a litle differently.  If you reside in Europe, they are offering free mounting kits to owners of their Mugen 5 cooler, simply reach out them via this link, again attaching a receipt for the cooler and either a Ryzen CPU or AM4 motherboard.  Owners of a Katana 3 or 4, Kabuto 3, Shuriken Rev. B, Tatsumi “A”, Byakko, or Iori cooler need not even go through that process, your coolers mount is already compatible.  For owners of other coolers you can reach out to Scythe via the previous link to order a bracket for  3,99€, to ship out sometime in May or later.  We will let you know when we hear from the NA branch.

scythe.jpg

"Coinciding with the new AMD Zen-based Ryzen CPUs, and the new AM4 socket, NZXT will be providing a free retention bracket for all current Kraken users. NZXT believes in providing high-quality components to our customers, in addition to exceptional customer service no matter where they reside and we will continue that support alongside the launch of Ryzen."

Here is some more Tech News from around the web:

Tech Talk

 

Source: NZXT

FSP Group Launches CMT210 Mid-Tower ATX Case

Subject: Cases and Cooling | February 23, 2017 - 01:44 AM |
Tagged: mid tower, led, FSP Group, fsp, atx

Today FSP Group (a company mainly known for power supplies with headquarters in Taiwan) is launching a new mid tower ATX computer case called the CMT210. The new PC mid-tower features a transparent side window, black angular exterior with LED accents, and a focus on cooling performance. The 460mm x 220mm x 432mm steel case is aimed at gamers and enthusiasts that want to show off their PC internals.

FSP Chassis_CMT210_Product Image.jpg

The front of the CMT210 mid tower is dominated by a massive filtered vent that houses up to three 120mm fans or a 360mm water cooling radiator. The large vent with angled “water droplet” mesh is surrounded by a shroud that features colored accents in either black, red, silver, or deep blue depending on the model you choose. Up top the case offers two audio jacks, two USB 3.0 ports, and a single USB 2.0 port. (The USB 3.0 ports can be plugged into a USB 2.0 motherboard header with the included adapter if you are still holding off on upgrading to Kaby Lake or Ryzen.)

The top of the case is flat with no vents, and there are also no vents on the bottom. Instead there is a single 120mm exhaust fan vent at the rear of the case. FSP includes two of its own 120mm LED fans with the case that come pre-installed in the front and back.

The CMT210 is compatible with ATX motherboards, seven PCI slots, three 3.5” and three 2.5” tool-less drive bays, CPU coolers up to 160mm high and graphics cards up to 360mm long, and ATX power supplies (20.5cm). The power supply is bottom mounted in this case and the storage drives are snapped into trays in the bottom-front caddy and motherboard tray. There are cutouts for cable routing but no rubber grommets (not the end of the world, but they are a nice touch).

FSP claims that its new case is designed with "cooling, expansion, and compatibility" in mind. It is available now in the US though pricing is still unknown as retailers have not put up product pages yet. For more information on the CMT210 you can find details on this product page and this video.

I am curious how well the cooling setup will work with only a single exhaust fan especially if you had a multi GPU setup with aftermarket coolers. Hopefully Sebastian can put it through its paces at some point to examine the build quality and cooling prowess claims. If the price is right, it could be a good budget case as it does not look too bad and does not go crazy with LEDs and bling which is nice to see (I may just be getting old though haha).

What are your thoughts on PSU maker FSP Group getting into the case market?

Source: FSP

AMD Ryzen CPUs Will Be Available With New Stock Coolers

Subject: Cases and Cooling | February 22, 2017 - 01:04 AM |
Tagged: Wraith, ryzen, hsf, AMD Wraith, amd

Information recently leaked online detailing how AMD will package its retail Ryzen offerings. In addition to the usual processor-only trays for OEMs and system integrators, AMD will offer retail boxed Ryzen processors with a basic HSF (heatsink-fan), circular 95W Wraith Spire cooler, 140W Wraith Max HSF depending on the processor as well as CPU-only boxes of the X-series (e.g. Ryzen 7 1700X) processors for enthusiasts looking to choose their own air or liquid cooler.

AMD Ryzen Cooling Solutions.jpg

Image via Informtica Cero.

TechPowerUp is reporting that a basic cooler similar to AMD’s pre-Wraith style of heatsinks will be packaged with the lower end Ryzen 3 and Ryzen 5 chips – mainly the 65W models. Moving up the processor lineup, the non-X Ryzen 5 and Ryzen 7 processors (up to Ryzen 7 1700) will be bundled with a new “Wraith Spire” cooler that sports a circular design with curved aluminum fins and an (approximately) 80mm fan. This new HSF is rated at 95W and measures 109mm x 103mm x 54mm and is allegedly engineered to be a low noise cooling solution.

Stepping things up a notch, the “Wraith Max” is a tweaked FX-era Wraith cooler (horizontal boxed design with a single fan) that can handle up to 140W processors and has been designed with noise levels in mind while not sacrificing too much performance. It measures 105mm x 108mm x 85mm so it is a fair bit taller than the Wraith Spire. This cooler will come with the higher end eight core Ryzen chips such as the Ryzen 7 1700X and 1800X.

The X variants will also be available in WOF (without fan-heatsink) packages that come in retail boxes but without any heatsink. These WOF packages should come in a bit cheaper than the processor+HSF multipacks and will be ideal for users wanting to use liquid cooling or a higher end air cooler for overclocking.

Thanks to previous leaks that have revealed the box art, AMD will be clearly marking the retail packages to show which cooler is coming with which processor. Further, XFastest has posted images of the basic Ryzen (non-Wraith) heatsink, and you can see (albeit tiny) images of the Wraith Spire and Wraith Max in the leaked table (above, from Informatica Cero).

Sebastian seemed to be very impressed by the original Wraith cooler where he found it to be a significant improvement over AMD’s previous OEM designs and able to match the Hyper 212 Evo in cooling performance (though the Wraith couldn’t quite match it in noise levels due to its smaller fan). So long as AMD maintains quality control and builds on the previous Wraith’s strengths (and hopefully larger fans, at least on the Max), they should be good little coolers. I am interested to see the new Wraith coolers in detail and how well they perform. I suspect many readers will be opting for the CPU-only packages, but for those readers that just want a simple bundled cooling solution I hope the Wraith Spire and Wraith Max turn out to be good deals.

Also read:

Source: TechPowerUp

The uncommon and very yellow Reeven Okeanos RC-1402

Subject: Cases and Cooling | February 21, 2017 - 03:56 PM |
Tagged: reeven, Okeanos, Okeanos RC-1402

The Okeanos RC-1402 is a large hunk of metal, standing 140x135x163mm and weighing in at 1145g when both the 12cm and 14cm fans are attached.  This makes it just a bit smaller than Morry's beloved Noctua NH-D15, which will allow it to fit into slightly tighter builds.  [H]ard|OCP tested it on an i7-4770K and found its performance to be acceptable but not outstanding in any way.  Unfortunately, the price does stand out as it costs more than coolers which offer equivalent performance. Drop by for a look at their whole review.

1483479388eXaQ2C2BoR_2_1.png

"The Reeven Okeanos RC-1402 is not exactly a new CPU air cooler, but it is not widely available in the United States so it has not gotten a lot of coverage in North America. The cost for the cooler is not low, and two staggered-sized fans are included in the box, so we have fairly high performance expectations for this twin tower cooler."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: [H]ard|OCP
Author:
Manufacturer: Corsair

Woof

The Corsair Bulldog, version 2.0, is now shipping and upgrades the internal components to a Z270 motherboard and upgrade fans with improved noise profiles. Other than that, the Bulldog looks, style, form and function remain unchanged.
 
 
The design is likely still dividing opinions; the short squat form factor with angular exterior will appeal to some, but the dimensions are perfectly suited to sitting in or around a TV and entertainment center. And because of the spacing and design of the interior, the mini ITX form factor can support any performance level of GPU and Intel's latest Kaby Lake processors. This gives users the flexibility to build for ultimate performance, making the dream of a 4K-ready gaming PC in the living room a possibility.
 
DSC02379.jpg
 
Our quick video review will talk about the design, installation process and our experiences with the system running some premium components.
 
bulldog1.jpg
  • Corsair Bulldog 2.0 (includes case, PSU, MB and CPU cooler)
  • Intel Core i7-7700K
  • 16GB Corsair Vengeance DDR4
  • Corsair Z270 Motherboard mini ITX
  • Corsair Hydro GTX 1080
  • 480GB Neutron GTX SSD
  • 600 watt Corsair PSU

The barebones kit starts at $399 through Corsair.com and includes the case, the motherboard, CPU cooler and 600-watt power supply. Not a bad price for those components!

bulldog2.jpg

You won't find any specific benchmarks in the video above, but you will find some impressions playing Resident Evil 7 in HDR mode at 4K resolution with the specs above, all on an LG OLED display. (Hint: it's awesome.)