All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
If Microsoft was left to their own devices...
Microsoft's Financial Analyst Meeting 2013 set the stage, literally, for Steve Ballmer's last annual keynote to investors. The speech promoted Microsoft, its potential, and its unique position in the industry. He proclaims, firmly, their desire to be a devices and services company.
The explanation, however, does not befit either industry.
Ballmer noted, early in the keynote, how Bing is the only notable competitor to Google Search. He wanted to make it clear, to investors, that Microsoft needs to remain in the search business to challenge Google. The implication is that Microsoft can fill the cracks where Google does not, or even cannot, and establish a business from that foothold. I agree. Proprietary products (which are not inherently bad by the way), as Google Search is, require one or more rivals to fill the overlooked or under-served niches. A legitimate business can be established from that basis.
It is the following, similar, statement which troubles me.
Ballmer later mentioned, along the same vein, how Microsoft is among the few making fundamental operating system investments. Like search, the implication is that operating systems are proprietary products which must compete against one another. This, albeit subtly, does not match their vision as a devices and services company. The point of a proprietary platform is to own the ecosystem, from end to end, and to derive your value from that control. The product is not a device; the product is not a service; the product is a platform. This makes sense to them because, from birth, they were a company which sold platforms.
A platform as a product is not a device nor is it service.
Another Next Unit of Computing
Just about a year ago Intel released a new product called the Next Unit of Computing, or NUC for short. The idea was to allow Intel's board and design teams to bring the efficient performance of the ultra low voltage processors to a desktop, and creative, form factor. By taking what is essentially Ultrabook hardware and putting it in a 4-in by 4-in design Intel is attempting to rethink what the "desktop" computer is and how the industry develops for it.
We reviewed the first NUC last year, based on the Intel Ivy Bridge processor and took away a surprising amount of interest in the platform. It was (and is) a bit more expensive than many consumers are going to be willing to spend on such a "small" physical device but the performance and feature set is compelling.
This time around Intel has updated the 4x4 enclosure a bit and upgrade the hardware from Ivy Bridge to Haswell. That alone should result in a modest increase in CPU performance with quite a bit of increase in the integrated GPU performance courtesy of the Intel HD Graphics 5000. Other changes are on the table to; let's take a look.
The Intel D54250WYK NUC is a bare bones system that will run you about $360. You'll need to buy system memory and an mSATA SSD for storage (wireless is optional) to complete the build.
Haswell and Kepler
With the release of Intel's Haswell core processors and the updated graphics card lineup from NVIDIA, Digital Storm has updated many of their custom PC lines to include both. A little while ago the company sent along a pre-built Ode system that includes some impressive hardware like an overclocked Core i7-4770K and a GTX 780 along with a Corsair SSD and more. Even though the design is using fully off-the-shelf parts, the build quality is impressive and will interest many users that want the jump start of a ready made rig.
Our article today (and embedded video) will give you a quick overview of the hardware, the build and the performance that you can expect for this $2500 PC.
- Digital Storm Ode Custom
- Intel Core i7-4770K (OC to 4.4 GHz)
- ASUS Z87-C Motherboard
- Corsair H100 Water Cooler
- 16GB (2 x 8GB) Kingston HyperX DDR3-1866
- NVIDIA GeForce GTX 780 3GB Graphics Card
- 120GB Corsair Neutron SSD
- 1TB Western Digital 7200 RPM HDD
- Corsair HX1050 Power Supply
- Corsair Graphite 600T White Case
Current pricing on this build is $2577 from Digital Storm's website and while that is definitely higher than buying the same components out right, the difference shouldn't be enough to scare you off. More on that later.
The Ode from Digital Storm is built around the Corsair 600T chassis, an older design that still stands up well in terms of looks and performance. The only draw back to it is that it does not have an internal USB 3.0 header and thus still uses the external cable to plug into the back of the motherboard. If you want to see video from 2010 we did of this case, check the way back machine to do so!
A white color scheme really makes this system stand out and the window on the side panel will let everyone gawk at the components included inside. With plenty of room for fans, radiators and good intake filter support throughout, the 600T remains one of our favorite chassis at PC Perspective.
A 27-in Table PC
While foraging through the land that is Las Vegas during the 2013 Consumer Electronic Show, we ran into Lenovo and they showed us a unique PC design they were calling the "Table PC". The Lenovo IdeaCentre Horizon is a 27-in All-in-One design that is finally available in the market and brings some very interesting design decisions and use cases.
At its heart, the IdeaCentre Horizon is a 27-in 1920x1080 display with an AIO PC design that includes some pretty standard Intel-based Ultrabook-style hardware. That includes an Intel Core i5-3337U dual-core processor, a discrete NVIDIA GeForce GTX GT620M graphics processor, a 1TB 5400 RPM HDD and 8GB of DDR3-1600 memory.
But this computer is much more important than simply the hardware it is built around. Built to switch between a standard AIO configuration but allows for a fold-down, multi-user interface with custom software for interaction, the Horizon attempts to bring life to low-cost computers built for more than one user at a time.
From a physical perspective, the IdeaCentre Horizon has the normal and expected design cues. There is an HD webcam up top for Skype calls, touch-based buttons for volume and brightness, indicator lights for drive usage, power states, etc.
The 1920x1080 10-point touch screen on the Horizon was nice, but not great. For a 27-in display that you are going to be interfacing with very closely, the pixel density is definitely lower than our 1080p 21-in touch screen AIO floating around the office. There were some minor glare issues as well, even with the Lenovo "anti-glare coating" while using the Horizon in the fully laid down, flat position.
Power and Value
We have seen our fair share of mini-ITX cases and system builds over the last six months, including rigs from Digital Storm and AVADirect. They attempt to offer a balance between performance, power, noise and size and some do it better than others. With the continued development of the mini-ITX form factor more users than ever are realizing you can get nearly top-end performance for gaming in a smaller package.
Today we are taking a look at the iBuyPower Revolt, in particular the Revolt R770, the highest end base offering of the system. Built around a small, but not tiny, PC chassis iBuyPower is able to include some pretty impressive specifications:
- Intel Core i7-3770K processor
- Custom built Z77 mini-ITX motherboard
- NZXT CPU water cooler
- NVIDIA GeForce GTX 670 2GB graphics cards
- 8GB DDR3-1600 memory
- 120 GB Intel 320 Series SSD
- 1TB Western Digital Blue hard drive
You get all of this in a case that is only 16-in x 16-in x 4.5-in built with a glossy black and white color scheme. The company claims that the Revolt was "designed to be a gaming system for any location" including a home theater, a dorm room or in your study. It includes "vents and air channels positioned precisely to deliver cool ambient air exactly where it is needed" and "integrated atmospheric lighting system is customizable in color."
Check out or quick video review below and then follow on to the full post for more photos of the system and a quick check of performance!
An AIO and Tablet Design
When new and interesting architectures and technology are developed, it enables system designers to build creative designs and systems for consumers. With its renewed focus on power efficiency as well as performance, Intel has helped move the industry towards new form factors like the Next Unit of Computing and the evolution of the All-in-One design.
Today we are taking a look at the new Sony VAIO Tap 20 system, an AIO that not only integrates a 10-point touch screen on a 20-in 1600x900 resolution display and an Ivy Bridge architecture ultra low voltage processor, but also a battery to make the design semi-mobile and ripe for inclusion in high-tech homes.
Check out our quick video overview below and then follow that up with a full pictorial outline and some more details!
This isn't Sony's first foray into all-in-one PCs of course but it is among the first to combine this particular set of features. In what is essentially an Ultrabook design with a large screen, the Tap 20 combines an Ivy Bridge Core i5 processors, 4GB of DDR3 memory and a 750GB hard drive. Here is the breakdown:
|Sony VAIO Tap 20 System Setup|
|CPU||Intel Core i5-3317U|
|Memory||4GB DDR3-1600 (1 x SODIMM)|
|Hard Drive||750GB XXRPM HDD (2.5-in)|
|Graphics Card||Intel HD 4000 Processor Graphics|
|Display||1600x900 20-in touch screen (10 point)|
2 x USB 3.0
SD / Memory Stick card reader
Headphone / Mic connection
|Operating System||Windows 8 x64|
The display is pretty nice with a 1600x900 reoslution though I do wish we had seen a full 1080p screen for HD video playback. As with most touch screens, the display quality is under that of a non-touch IPS monitor but even up close (as you tend to use touch devices) you'll be hard pressed to find any imperfections. Viewing angles are great as well which allows for better multi-person usage.
On the left we find the power connection and a hard wired Ethernet connection that compliments the integrated 802.11n WiFi.
Since the Apple transition to Intel processors and mostly off-the-shelf PC hardware in 2006, people have been attempting to run OS X on home built computers originally destined for Windows. While running a different operating system on similar hardware may seem like a trivial thing, my historical experience with building a so called “Hackintosh” has been arduous at times. However, since it has been a few years since my last attempt, I decided to give installing OS X on modern PC hardware another try.
Otellini will never live that one down...
One of the big stepping stones for OS X on PC based motherboards was the widespread adoption of EFI instead of the standard BIOS environment. Official Intel Macs have always used EFI, which meant until a few years ago, emulating the EFI environment on third party motherboards to build a Hackintosh. That has changed recently and with the release of Sandy Bridge, we have seen full EFI support across all motherboard vendors.
The premiere source for information about Hackintosh builds is the tonymacx86 site and forums. The forums on tonymac is an extremely useful resource for learning about the current state of the Hackintosh scene and the experiences of people with similar hardware to what we will be using.
Tony publishes a yearly Buyer’s Guide article with components of all price ranges that will work with OS X with minimal hassle. He provides many different options in different price ranges in the 2012 guide, including H77, Z77, and even X79 based parts.
While it is technically possible to use AMD processors and graphics cards in a Hackintosh build, Apple officially supports Intel CPUs and NVIDIA Kepler GPUs, so they require much less work to ensure the operating system can fully utilize these components.
A Workstation All-in-One
While consumers know HP for its substantial market share in the world of desktops and notebooks, perhaps more important to HP's bottom line is the company's server and workstation business. While we all know what servers do there might be some confusion about what a workstation is and what it does.
Workstations are usually defined as computers used by content creators and despite that fact that you burned that DVD of your family vacation, that's not quite the same. Brands like Xeon, Quadro, FirePro and Opteron are what you will find different in a workstation class computer versus a standard computer or laptop. And while technology enthusiasts will debate the actual differences between these components, the fact is that the market demands them.
Today we are taking a quick look at the HP Z1 Workstation, a unique workstation in that it resides in the shell of an all-in-one computer. But not just your normal AIO - this is a 27-in 2560x1400 display with a chassis that opens up for easy access to components inside.
Once we show you how the processor, SSD, Quadro graphics and everything else works inside I think you will see the appeal of this kind of system even for professionals that require the stability and software support of a workstation class device. Check out our Video Perspective below and then continue on for some more photos and benchmark results from the HP Z1 Workstation!
The side profile shows the HP Z1 is slim enough but still holds a lot of hardware.
You'll find two USB 3.0 ports, Firewire, audio connections and a card reader near the bottom.
The power button, activity lights and eject button live up top.
Intel Board Team Creates New Form Factor
In many ways the desktop computer needs to evolve. Yes, I know that PC gaming is not only thriving and growing but for the majority of consumers the need to have a box in their office that measures 2' x 3' x 1', taking up leg room under the desk is...exaggerated. Intel thinks they have a solution for this, a new form factor for a PC they are calling the NUC - Next Unit of Computing.
By utilizing low power versions of the Intel Ivy Bridge mobile processors Intel has shrunk the desktop PC to a size even smaller than mini-ITX and hopes they can address various market segments with this new design.
Check out our video right here and continue on for the full written review!
While the consumer that simply needs a basic computing box is definitely a target for Intel and its board division, they are hoping to hit the mainstream markets with interactive displays, digital signage, marketing, analytics and more. And though the design we are looking at today has a very specific form factor, the low power boards themselves could easily be placed into nearly any industrial design.
For a size reference, the Intel NUC is a 4-in x 4-in design that is noticeably smaller than even the mini-ITX form factor that is quickly becoming popular in the DIY markets. The NUC does not have a removable processor though so what you buy is what you get with only a few components that are upgradeable.
A small, custom chassis
Right before the holiday weekend we got an email from Digital Storm detailing some changes to the Bolt system based on ours, and other reviewers, feedback. Design changes include:
- "Quieter operation" after moving from a Bronze level 500 watt 1U power supply to a Gold level unit. I have put that part in quotes because I am hesitant to believe that much has changes on the sound levels of the system; we are still talking about a 1U unit here with two tiny fans. Until DS publishes some sound level metrics, we'll consider this a modest change.
- Digital Storm has also given the Bolt "a less glossy and improved external finish" to help prevent fingerprints and dust from reflecting in light.
In addition, there have been some hardware changes in the Level 3 unit that we were sent that are fairly significant:
- Upgrade from a 60GB cache SSD to a 120GB SSD dedicated to the OS installation.
- Storage drive lowered from a 1TB to a 500GB
- Upgrade from a Core i5-3570K to a Core i7-3770K CPU
That is a pretty hefty change in hardware specs, in particular the move from the Core i5-3570K to the i7-3770K. That increases the CPU performance of the Bolt pretty handily and they were able to do that without raising the price.
This definitely gives us a better opinion overall for the entire Digital Storm Bolt configuration as tested and makes it a much better option when compared to the other recent systems we have reviewed.
END UPDATE 11/22/2012
A couple of months ago Digital Storm contacted us about a new design they were working on that they claimed would easily become the highest performance, smallest custom PC on the market. The result of that talk was the new Digital Storm Bolt, a system designed in-house by DS to target PC gamers that want a powerful PC without the bulk of traditional desktop designs.
Digital Storm claims that the Bolt is the "thinnest, most powerful gaming PC ever designed" and we tend to agree. This is not chassis that you can buy off the shelf but instead was custom designed for this system and actually requires some very specific hardware for it to function completely. Items like a 1U power supply, 90 degree PCI Express riser extensions and slim-line optical drives aren't found in your standard gaming PCs.
Available in several starting "levels" of configuration, the Digital Storm Bolt can include processors from the Core i3-2100 all the way up to the Core i7-3770K and graphics cards starting at the GTX 650 Ti 2GB and increasing to the GTX 680 2GB. Our system came with the following hardware:
- Intel Core i5-3570K @ 4.2 GHz
- Low Profile CPU Heatsink
- 8GB DDR3 1600 MHz memory
- GeForce GTX 660 Ti 2GB
- 60GB cache SSD + 1TB 7200 RPM HDD
- Gigabyte GA-Z77N-WiFi motherboard
- 1U 500 watt power supply
- Windows 7 Home Premium x64
- Custom DS Bolt Chassis
Starting cost for this configuration is $1,599.
Check out our quick video review!
The box the Bolt ships in is pretty timid compared to some of the crates that have hit our office recently but that's just fine by me. Due to the small size of the case though I have actually had some laptop boxes (the Alienware M18x comes to mind) that were bigger!
There she is, the Digital Storm Bolt, a combination of custom steel case design and fingerprint-loving piano black paint. Measuring just 14-in tall and 3.6-in wide the case is going to be able to fit and blend in places other desktops simply could not.
The Dell All-in-One
Reviewers, at times, can be somewhat myopic. I speak for myself in this particular instance. My job as a writer is to test hardware on a daily basis, and as such I have a very keen understanding (or so I hope) of the intricacies of computer design. If I need to build a machine, whether for test purposes or something that my wife can play Song Pop on, I have a near infinite variety of components that I can choose from to fit the needs of the project. As such, we often forget that not everyone has that level of expertise. Most people, in fact, just want to be able to buy something that not only fits their needs, but also simply just has to work.
Dog is unimpressed with packaging. UPS complained profusely though.
This is the reason why we have the Dells, HPs, and Lenovos of the world. The vast majority of people out there are unwilling to build their own machine and support it themselves. They neither have the time nor patience to dive in and learn the ins and outs of a modern PC and the software that runs them. This is not a bad thing. Just as I do not have the patience to learn how to sew, I still like wearing clothes. At least during our podcasts. For the most part.
We must also admit that we are moving well away from the typical beige box that dominated the 90s and early 2000s. Manufacturers have a much better eye for not only functionality, but also aesthetics. No longer do we have the hulking CRTs of yesteryear, and neither do we have the large boxes that are nearly indistinguishable from one or another. Multiple form factors abound and these large manufacturers have design teams that pay very close attention to things like compatibility, power consumption, and thermal dissipation. With these things in mind, they are able to create unique devices that not just serve the needs of consumers, but also just simply work.
Apple has been at the forefront of this type of design for quite some time. This is a company that has prized fit, finish, and functionality far more than they have pursued cost cutting and homogenization. This has lead to much higher margins for the company, and a nearly rabid following by the people buying their platforms. We certainly can argue that they probably perfected the “all-in-one” machine back in the Macintosh days, and since that time they have not stood still. The iMac was a further advancement in that field, but the introduction of relatively inexpensive and large LCD panels allowed them to further shrink the all-in-one. It also allowed them to further sculpt the design into what we see today.
Everything is nicely supported in the box.
Obviously people around the industry have noticed this trend, and noticed the devoted following of the Apple consumers. It is hard to miss. The world is a big place though, and surely there are people who crave the type of design that Apple pushes, but do not necessarily want to jump on that particular bandwagon. Dell has recognized this and created their XPS One lineup of products. Not everyone wants to run OSX and pay the Apple tax. If this is the case for a reader, then this might be the product that catches their attention.
Specifications and Outside Features
In recent weeks we have been getting a lot of requests for system reviews, but when ORIGIN PC approached us about testing a super-high-end system with dual NVIDIA GeForce GTX 690s, we were definitely interested. When we were told to expect a 4.9 GHz Sandy Bridge-E platform to base those Quad SLI GPUs on, we were sold.
ORIGIN PC has been around since 2009 when several people started the company after leaving Alienware. While boutique computer builders are still fairly common in today's market, ORIGIN tries to differentiate with ideas like lifetime (yes, lifetime) phone and forum support for your system, lifetime labor for upgrades and services and 72 hours of burn in testing on each machine.
The rig we are looking at today falls under the Genesis brand and is the highest end starting point for a custom PC from ORIGIN. Options for this series include Sandy Bridge-E, Ivy Bridge and even AMD FX processors all with water cooling, multi-GPU configurations and of course, fancy lighting.
Here is a quick overview of the most prominent specs:
- Corsair 800D chassis
- Intel Core i7-3930K 6-core Sandy Bridge-E @ 4.9 GHz
- Intel DX79SR Motherboard
- Dual NVIDIA GeForce GTX 690 4GB cards (Quad SLI)
- 16GB DDR3-1866 quad-channel memory
- 1200 watt Corsair AX1200i Power Supply
- Dual 120GB Corsair Force GT SSDs in RAID 0
- 1TB Seagate 7200 RPM SATA 6G HDD
- Custom ORIGIN Cryogenic liquid cooling setup on CPU
Our estimated cost is...$5,750.
Windows RT: Runtime? Or Get Up and Run Time?
Update #1, 10/26/2012: Apparently it does not take long to see the first tremors of certification woes. A Windows developer by the name of Jeffrey Harmon allegedly wrestled with Microsoft certification support 6 times over 2 months because his app did not meet minimum standards. He was not given clear and specific reasons why -- apparently little more than copy/paste of the regulations he failed to achieve. Kind-of what to expect from a closed platform... right? Imagine if some nonsensical terms become mandated or other problems crop up?
Also, Microsoft has just said they will allow PEGI 18 games which would have received an ESRB M rating. Of course their regulations can and will change further over time... the point is the difference between a store refusing to carry versus banishing from the whole platform even for limited sharing. The necessity of uproars, especially so early on and so frequently, should be red flags for censorship to come. Could be for artistically-intentioned nudity or sexual themes. Could even be not about sex, language, and violence at all.
Last month, I suggested that the transition to Windows RT bares the same hurdles as transitioning to Linux. Many obstacles blocking our path, like Adobe and PC gaming, are considering Linux; the rest have good reason to follow.
This month we receive Windows RT and Microsoft’s attempt to shackle us to it: Windows 8.
To be clear: Microsoft has large incentives to banish the legacy of Windows. The way Windows 8 is structured reduces it to a benign tumorous growth atop Windows RT. The applications we love and the openness we adore are contained to an app.
I will explain how you should hate this -- after I explain why and support it with evidence.
Microsoft is currently in the rare state of sharp and aggressive focus to a vision. Do not misrepresent this as greed: it is not. Microsoft must face countless jokes about security and stability. Microsoft designed Windows with strong slants towards convenience over security.
That ideology faded early into the life of Windows XP. How Windows operates is fundamentally different. Windows machines are quite secure, architecturally. Con-artists are getting desperate. Recent attacks are almost exclusively based on fear and deception of the user. Common examples are fake anti-virus software or fraudulent call center phone calls. We all win when attackers get innovative: survival of the fittest implies death of the weakest.
A look outside and in
We handle a fair amount of system reviews here at PC Perspective and use them mainly as a way to feature unique and interesting designs and configurations. We know how the hardware will perform for the most part; doing extensive CPU and GPU testing on nearly a daily basis. Sometimes we'll get systems in that are extremely budget friendly, other times vendors pass us machines that have MSRPs similar to a Kia automobile. Then there are times, like today, we get a unique design that is a great mix of both.
AVADirect has had a Mini Gaming PC design for a while now but recently has gone through a refresh that adds in support for the latest Ivy Bridge processors, NVIDIA Kepler GPUs all using a new case from BitFenix that combines it in a smaller, mini-ITX form factor.
The quick specifications look like this:
- BitFenix Prodigy chassis
- Intel Core i7-3770K CPU, Overclocked at 4.4 GHz
- ASUS P8Z77-I Deluxe Z77 Motherboard
- EVGA GeForce GTX 680 2GB GPU
- OCZ 240GB Vertex 3 SSD
- Seagate 2TB SATA 6G HDD
- 8GB Crucual DDR3-1866 Memory
- Cooler Master 850 watt Silent Pro PSU
You'll also see a large, efficient Prolimatech cooler inside along with a Blu-ray burner and Windows 7 for a surprisingly reasonable $2100 price tag.
The BitFenix Prodigy chassis is a unique design that starts with sets of FiberFlex legs and handles surrounding the mini-ITX case. The minor flexibility of the legs absorbs sound and impact on the table while the handles work great for picking up the system for LAN events and the like. While at first I was worried about using them to support the weight of the rig, I had no problems and was assured by both BitFenix and by AVADirect it would withstand the torture.
Check out our video review before continuing on to the full article with benchmarks and pricing!
Thoughts about Interface Design in General
I have been in several situations where a variety of people claim the gamepad is superior for gaming because that is what it was designed for. No elaboration or further justification is given. The controller is designed for gaming and is therefore clearly better. End of – despite often being start to – discussion in their minds.
Really it is a compromise between the needs of popular games and the environment of a couch.
Interface design is complicated. When you design an interface you need to consider: the expected types of applications; the environment of the user; what you are permitted to use; what tolerances are allowed; what your audience is used to; and so on, so forth. There is a lot to consider when you design an application for a user and I could make an educated guess that it is at least as hard to design the input device itself.
The history of keyboard design is a great example of tradeoffs in input devices.
Sometimes it is better to be worse...
The first wave of keyboards were interfaces to the mechanical typewriter. These keyboards were laid out in alphabetical order because as long as each key is accessible and the user could find the letter they wanted – who cares, right? We already have an order for the alphabet that people understands so the users should not have too much difficulty in finding the letter they need.
Another constraint quickly game to light: typists were too fast and the machines jammed.
The engineers now needed to design an input method which could keep up with the typist. Correcting the machine itself was somewhat futile so the solution was to make the typist as slow as possible. The most common letters in the English language were spread all over the place and – while possibly by fluke – the left hand is favored, as in made do more work, over the often dominant right hand.
The problem required making the most aggravating keyboard layout engineers could imagine. QWERTY was born.
Or: the countdown to a fresh Start.
Over time – and not necessarily much of it – usage of a platform can become a marriage. I trusted Windows, nee MS-DOS, guardianship over all of my precious applications which depend upon it. Chances are you too have trusted Microsoft or a similar proprietary platform holder to provide a household for your content.
It is time for a custody hearing.
These are the reasons why I still use Windows – and who could profit as home wreckers.
1st Reason – Games
The most obvious leading topic.
Computer games have been dominated by Windows for quite some time now. When you find a PC game at retail or online you will find either a Windows trademark or the occasional half-eaten fruit somewhere on the page or packaging.
One of the leading reasons for the success of the PC platform is the culture of backwards compatibility. Though the platform has been rumored dead ad-infinitum it still exists – surrounded by a wasteland of old deprecated consoles. I still play games from past decades on their original platform.
I say let the world go to hell
… but I should always have my tea. (Notes From Underground, 1864)
You can praise video games as art to justify its impact on your life – but do you really consider it art?
Best before the servers are taken down, because you're probably not playing it after.
Art allows the author to express their humanity and permits the user to consider that perspective. We become cultured when we experiment with and to some extent understand difficult human nature problems. Ideas are transmitted about topics which we cannot otherwise understand. We are affected positively as humans in society when these issues are raised in a safe medium.
Video games, unlike most other mediums, encourage the user to coat the creation with their own expressions. The player can influence the content through their dialogue and decision-tree choices. The player can accomplish challenges in their own unique way and talk about it over the water cooler. The player can also embed their own content as a direct form of expression. The medium will also mature as we further learn how to leverage interactivity to open a dialogue for these artistic topics in completely new ways and not necessarily in a single direction.
Consciously or otherwise – users will express themselves.
With all of the potential for art that the medium allows it is a shame that – time and time again – the industry and its users neuter its artistic capabilities in the name of greed, simplicity, or merely fear.
Introduction and Externals
Corsair manufactures a wide variety of components and peripherals for PC enthusiasts. They essentially target the most enthusiastic customers in whatever market they enter – breaking the ice with the coldest and harshest critics who are never above nitpicking faults and flaws. Despite tossing their first generation products to the sharks they perform uncharacteristically well for a new contender almost every time. They look before they leap.
The Corsair K60 and K90 were launched simultaneously and represent Corsair’s first attempt at producing a mechanical keyboard. Corsair has included media keys, a metal volume wheel, and a Windows-key lock on both keyboards if you find yourself yelling, “I HATE THIS KEY!” at your desktop because your game is now minimized and cannot receive your hatred.
Rubberized when down, not when up -- but stable either way.
I never said I wasn't one of the nitpickers.
Both keyboards are built around an aluminum chassis with a nonslip coating to each key. Each keycap has a sharply defined edges compared to the more round edges found on a Razer Blackwidow and other similar keyboards. Neither keyboard has rubberized tips on their ergonomic flaps although slipping has not been an issue in my testing.
Most IT workers or computer enthusiasts tend to ‘accumulate’ computer and electronics gear over time. Over the years it is easy to end up with piles of old and outdated computer parts, components and electronics–whether it’s an old Pentium machine that your work was throwing out, RAM chips you no longer needed after your last upgrade, or an old CRT monitor that your cousin wasn’t sure what to do with. Tossing the accumulated hardware out with the next trash pickup doesn’t even enter the equation, because there’s that slight possibility you might need it someday.
I myself have one (or two, and maybe half an attic…) closet full of old stuff ranging from my old Commodore 64/1541 Floppy disk drive with Zork 5.25” floppies, to a set of four 30 pin 1 MB/70ns SIMM chips that cost $100 each as upgrades to my first 486 DX2/50 Mhz Compudyne PC back in 1989. (Yes, you read that right, $100 for 1 MB of memory.) No matter if you have it all crammed into one closet or spread all over your house, you likely have a collection of gear dating back to the days of punch cards, single button joysticks, and InvisiClues guides.
Occasionally I’ll look into my own closet and lament all the ‘wasted’ technology that resides there. I’m convinced much of the hardware still has some sparks of life left. As a result, I am always looking for a reason to revive some of it from the dead. Since they’ve already been bought and paid for, it feels almost blasphemous to the technology gods not to do something with the hardware. In some cases, it might not be worth the effort, (Windows Vista on an old Micron Transport Trek2 PII-300 laptop doesn’t end well for anyone). In others cases, you can build something fun or useful using parts that you have sitting around and are waiting for a new lease on life.
An HTPC Perspective on home theater PC technology
We conducted a reader survey a few weeks ago, and one of the tech topics that received a surprising amount of interest in was HTPC coverage. You, our awesome readers, wanted to know more about the hardware and software behind them. I’ll admit that I was ardent about the prospects of talking HTPCs with you. As a relatively new entrant to that area of tech myself, I was excited to cover it, and give you more coverage on a topic you wanted to see more of!
Today we won't be talking about home theater PCs in the sense of a computer in the living room AV rack (Ryan covered that earlier this week), but rather a related technology that makes the HTPC possible: the CableCARD-equipped TV tuner.
I will forewarn you that this article is quite a bit more informal than my usual writings, especially if you only follow my PC Perspective postings. In the future, it may not be that way, but I wanted to give some backstory and some personal thoughts on the matter to illustrate how I got into rolling my own DVR and why I’m excited about it (mainly: it saves money and is very flexible).
Despite my previous attempts to “cut the cord” and use only Internet-based services for television, me and my girlfriend slowly but surely made our way back to cable TV. For about a year we survived on Netflix, Hulu, and the various networks’ streaming videos on their respective websites but as the delays between a shows airing and web streaming availability increased and Netflix instant Streaming started losing content the price of cable started to look increasingly acceptable.
She was probably the first one to feel the effects of a lack of new content – especially with a newfound love for a rather odd show called True Blood. It was at some point thereafter, once she had caught up with as many seasons offered on Netflix of various shows as possible that she broke down and ordered U-Verse. U-Verse is an interesting setup of television delivery using internet protocol (IPTV). While we did have some issues at first with the Residential Gateway and signal levels, it was eventually sorted out and it was an okay setup. It offered a lot of channels – with many in HD. In the end though, after the promotional period was up, it got very expensive to stay subscribed to. Also, because it was IPTV, it was not as flexible as traditional cable as far as adding extra televisions and the DVR functionality. Further, the image quality for the HD streams, while much better than SD, was not up to par with the cable and satellite feeds I’ve seen.
Being with Comcast for Internet for about three years now, I’ve been fairly happy with it. One day I saw a promotion for currently subscribed customers for TV + Blast internet for $80, which was only about $20 more than I was paying each month for its Performance tier.
After a week of hell Therefore, I decided to sign up for it. Only, I did not want to rent a Comcast box, so I went searching for alternatives.
Enter the elusive and never advertised CableCARD
It was during this search that I learned a great deal about CableCARDs and the really cool things that they enabled. Thanks to the FCC, cable television providers in the United States have to give their customers an option other than renting a cable box for a monthly fee – customers have to be able to bring their own equipment if they wish (they can still charge you for the CableCARD but at a reduced rate, and not all cable companies charge a fee for them). But what is a CableCARD? In short, it is a small card that resembles a PCMIA expansion card – a connector that can commonly be found in older laptops (think Windows XP-era). It is to be paired with a CableCARD tuner and acts as the key to decrypt the encrypted television stations in your particular subscriber package. They are added much like a customer-owned modem is, by giving the cable company some numbers on the bottom of the card that act as a unique identifier. The cable company then connects that particular card to your account and sends it a profile of what channels you are allowed to tune into.
There are some drawbacks, however. Mainly that On Demand does not work with most CableCARDS. Do note that this is actually not a CableCARD hardware issue, but a support issue on the cable company side. You could, at least in theory, get a CableCARD and tuner that could tune in On Demand content, but right now that functionality seems to be limited to some Tivos and the rental cable boxes (paradoxically some of those are actually CableCARD-equipped). It’s an unfortunate situation, but here’s hoping that it is supported in the future. Also, if you do jump into the world of CableCARDs, it is likely that you will find yourself in a situation where you know more about them than the cable installer as cable companies do not advertise them, and only a small number of employees are trained on them. Don’t be too hard on the cable tech though, it's primarily because cable companies would rather rent you a (expensive) box, and a very small number of people actually know about and need a tech to support the technology. I was lucky enough to get one of the “CableCARD guys,” on my first install, but I’ve also gotten techs that have never seen one before and it made for an interesting conversation piece as they diagnosed signal levels for the cable modem (heh). Basically, patience is key when activating your CableCARD, and I highly recommend asking around forums like DSLReports for the specific number(s) to call to get to the tier 2 techs that are familiar with CableCARDs for your specific provider when calling to activate it if you opt to do a self-install. Even then, you may run into issues. For example, something went wrong with activation on the server side at Comcast so it took a couple of hours for them to essentially unlock all of my HD channels during my install.