All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
The Architectural Deep Dive
AMD officially unveiled their brand new Bobcat architecture to the world at CES 2011. This was a very important release for AMD in the low power market. Even though Netbooks were a dying breed at that time, AMD experienced a good uptick in sales due to the good combination of price, performance, and power consumption for the new Brazos platform. AMD was of the opinion that a single CPU design would not be able to span the power consumption spectrum of CPUs at the time, and so Bobcat was designed to fill that space which existed from 1 watt to 25 watts. Bobcat never was able to get down to that 1 watt point, but the Z-60 was a 4.5 watt part with two cores and the full 80 Radeon cores.
The Bobcat architecture was produced on TSMC’s 40 nm process. AMD eschewed the upcoming 32 nm HKMG/SOI process that was being utilized for the upcoming Llano and Bulldozer parts. In hindsight, this was a good idea. Yields took a while to improve on GLOBALFOUNDRIES new process, while the existing 40 nm product from TSMC was running at full speed. AMD was able to provide the market in fairly short order with good quantities of Bobcat based APUs. The product more than paid for itself, and while not exactly a runaway success that garnered many points of marketshare from Intel, it helped to provide AMD with some stability in the market. Furthermore, it provided a very good foundation for AMD when it comes to low power parts that are feature rich and offer competitive performance.
The original Brazos update did not happen, instead AMD introduced Brazos 2.0 which was a more process improvement oriented product which featured slightly higher speeds but remained in the same TDP range. The uptake of this product was limited, and obviously it was a minor refresh to buoy purchases of the aging product. Competition was coming from low power Ivy Bridge based chips, as well as AMD’s new Trinity products which could reach TDPs of 17 watts. Brazos and Brazos 2.0 did find a home in low powered, but full sized notebooks that were very inexpensive. Even heavily leaning Intel based manufacturers like Toshiba released Brazos based products in the sub-$500 market. The combination of good CPU performance and above average GPU performance made this a strong product in this particular market. It was so power efficient, small batteries were typically needed, thereby further lowering the cost.
All things must pass, and Brazos is no exception. Intel has a slew of 22 nm parts that are encroaching on the sub-15 watt territory, ARM partners have quite a few products that are getting pretty decent in terms of overall performance, and the graphics on all of these parts are seeing some significant upgrades. The 40 nm based Bobcat products are no longer competitive with what the market has to offer. So at this time we are finally seeing the first Jaguar based products. Jaguar is not a revolutionary product, but it improves on nearly every aspect of performance and power usage as compared to Bobcat.
A Reference Platform - But not a great one
Believe it or not, AMD claims that the Brazos platform, along with the "Brazos 2.0" update the following year, were the company's most successful mobile platforms in terms of sales and design wins. When it first took the scene in late 2010, it was going head to head against the likes of Intel's Atom processor and the combination of Atom + NVIDIA ION and winning. It was sold in mini-ITX motherboard form factors as well as small clamshell notebooks (gasp, dare we say...NETBOOKS?) and though it might not have gotten the universal attention it deserved, it was a great part.
With Kabini (and Temash as well), AMD is making another attempt to pull in some marketshare in the low power, low cost mobile markets. I have already gone over the details of the mobile platforms that AMD is calling Elite Mobility (Temash) and Mainstream (Kabini) in a previous article that launched today.
This article will quickly focus on the real-world performance of the Kabini platform as demonstrated by a reference laptop I received while visiting AMD in Toronto a few weeks ago. While this design isn't going to be available in retail (and I am somewhat thankful based on the build quality) the key is to look at the performance and power efficiency of the platform itself, not the specific implementation.
Kabini Architecture Overview
The building blocks of Kabini are four Jaguar x86 cores and 128 Radeon cores colleted in a pair of Compute Units - similar in many ways to the CUs found in the Radeon HD 7000 series discrete GPUs. Josh has written a very good article that focuses on the completely new architecture that is Jaguar and compared it to other processors including AMD's previous core used in Brazos, the Bobcat core.
2013 Elite Mobility APU - Temash
AMD has a lot to say today. At an event up in Toronto this month we got to sit down with AMD’s marketing leadership and key engineers to learn about the company’s plans for 2013 mobility processors. This includes a refreshed high performance APU known as Richland that will replace Trinity as well as two brand new APUs based on Jaguar CPU cores and the GCN architecture for low power platforms.
Josh has put together an article that details the Jaguar + GCN design of Temash and Kabini and I have also posted some initial performance results of the Kabini reference system AMD handed me in May. This article will detail the plans that AMD has for each of these three mobile segments, starting with the newest entry, AMD’s Elite Mobility APU platform – Temash.
The goal of the APU, the combination of traditional x86 processing cores and a discrete style graphics system, was to offer unparalleled performance in smaller and more efficient form factors. AMD believes that their leadership in the graphics front will offer them a good sized advantage in areas including performance tablets, hybrids and small screen clamshells that may or not be touch enabled. They are acknowledging though that getting into the smallest tablets (like the Nexus 7) is not on the table quite yet and that content creation desktop replacements are probably outside the scope of Richland.
2013 Elite Mobility APU – Temash
AMD will have the first x86 quad-core SoC design with Temash and AMD thinks it will make a big splash in a relatively new market known as the “high performance” tablet.
Temash, built around Jaguar CPU cores and the graphics technology of GCN, will be able to offer fully accelerated video playback with transcode support as well with features like image stabilization and Perfect Picture enabled. Temash will also be the only SoC to offer support for DX11 graphics and even though some games might not have the ability to show off added effects there are quite a few performance advantages of DX11 over DX10/9. With more than 100% claimed GPU performance upgrade you’ll be able to drive displays at 2560x1600 for productivity use and even be able to take advantage of wireless display options.
A much needed architecture shift
It has been almost exactly five years since the release of the first Atom branded processors from Intel, starting with the Atom 230 and 330 based on the Diamondville design. Built for netbooks and nettops at the time, the Atom chips were a reaction to a unique market that the company had not planned for. While the early Atoms were great sellers, they were universally criticized by the media for slow performance and sub-par user experiences.
Atom has seen numerous refreshes since 2008, but they were all modifications of the simplistic, in-order architecture that was launched initially. With today's official release of the Silvermont architecture, the Atom processors see their first complete redesign from the ground up. With the focus on tablets and phones rather than netbooks, can Intel finally find a foothold in the growing markets dominated by ARM partners?
I should note that even though we are seeing the architectural reveal today, Intel doesn't plan on having shipping parts until late in 2013 for embedded, server and tablets and not until 2014 for smartphones. Why the early reveal on the design then? I think that pressure from ARM's designs (Krait, Exynos) as well as the upcoming release of AMD's own Kabini is forcing Intel's hand a bit. Certainly they don't want to be perceived as having fallen behind and getting news about the potential benefits of their own x86 option out in the public will help.
Silvermont will be the first Atom processor built on the 22nm process, leaving the 32nm designs of Saltwell behind it. This also marks the beginning of a new change in the Atom design process, to adopt the tick/tock model we have seen on Intel's consumer desktop and notebook parts. At the next node drop of 14nm, we'll see see an annual cadence that first focuses on the node change, then an architecture change at the same node.
By keeping Atom on the same process technology as Core (Ivy Bridge, Haswell, etc), Intel can put more of a focus on the power capabilities of their manufacturing.
The Intel HD Graphics are joined by Iris
Intel gets a bad wrap on the graphics front. Much of it is warranted but a lot of it is really just poor marketing about the technologies and features they implement and improve on. When AMD or NVIDIA update a driver or fix a bug or bring a new gaming feature to the table, they are sure that every single PC hardware based website knows about and thus, that as many PC gamers as possible know about it. The same cannot be said about Intel though - they are much more understated when it comes to trumpeting their own horn. Maybe that's because they are afraid of being called out on some aspects or that they have a little bit of performance envy compared to the discrete options on the market.
Today might be the start of something new from the company though - a bigger focus on the graphics technology in Intel processors. More than a month before the official unveiling of the Haswell processors publicly, Intel is opening up about SOME of the changes coming to the Haswell-based graphics products.
We first learned about the changes to Intel's Haswell graphics architecture way back in September of 2012 at the Intel Developer Forum. It was revealed then that the GT3 design would essentially double theoretical output over the currently existing GT2 design found in Ivy Bridge. GT2 will continue to exist (though slightly updated) on Haswell and only some versions of Haswell will actually see updates to the higher-performing GT3 options.
In 2009 Intel announced a drive to increase graphics performance generation to generation at an exceptional level. Not long after they released the Sandy Bridge CPU and the most significant performance increase in processor graphics ever. Ivy Bridge followed after with a nice increase in graphics capability but not nearly as dramatic as the SNB jump. Now, according to this graphic, the graphics capability of Haswell will be as much as 75x better than the chipset-based graphics from 2006. The real question is what variants of Haswell will have that performance level...
I should note right away that even though we are showing you general performance data on graphics, we still don't have all the details on what SKUs will have what features on the mobile and desktop lineups. Intel appears to be trying to give us as much information as possible without really giving us any information.
heterogeneous Uniform Memory Access
Several years back we first heard AMD’s plans on creating a uniform memory architecture which will allow the CPU to share address spaces with the GPU. The promise here is to create a very efficient architecture that will provide excellent performance in a mixed environment of serial and parallel programming loads. When GPU computing came on the scene it was full of great promise. The idea of a heavily parallel processing unit that will accelerate both integer and floating point workloads could be a potential gold mine in wide variety of applications. Alas, the promise of the technology did not meet expectations when we have viewed the results so far. There are many problems with combining serial and parallel workloads between CPUs and GPUs, and a lot of this has to do with very basic programming and the communication of data between two separate memory pools.
CPUs and GPUs do not share common memory pools. Instead of using pointers in programming to tell each individual unit where data is stored in memory, the current implementation of GPU computing requires the CPU to write the contents of that address to the standalone memory pool of the GPU. This is time consuming and wastes cycles. It also increases programming complexity to be able to adjust to such situations. Typically only very advanced programmers with a lot of expertise in this subject could program effective operations to take these limitations into consideration. The lack of unified memory between CPU and GPU has hindered the adoption of the technology for a lot of applications which could potentially use the massively parallel processing capabilities of a GPU.
The idea for GPU compute has been around for a long time (comparatively). I still remember getting very excited about the idea of using a high end video card along with a card like the old GeForce 6600 GT to be a coprocessor which would handle heavy math operations and PhysX. That particular plan never quite came to fruition, but the idea was planted years before the actual introduction of modern DX9/10/11 hardware. It seems as if this step with hUMA could actually provide a great amount of impetus to implement a wide range of applications which can actively utilize the GPU portion of an APU.
Jaguar Hits the Embedded Space
It has long been known that AMD has simply not had a lot of luck going head to head against Intel in the processor market. Some years back they worked on differentiating themselves, and in so doing have been able to stay afloat through hard times. The acquisitions that AMD has made in the past decade are starting to make a difference in the company, especially now that the PC market that they have relied upon for revenue and growth opportunities is suddenly contracting. This of course puts a cramp in AMD’s style, but with better than expected results in their previous quarter, things are not nearly as dim as some would expect.
Q1 was still pretty harsh for AMD, but they maintained their marketshare in both processors and graphics chips. One area that looks to get a boost is that of embedded processors. AMD has offered embedded processors for some time, but with the way the market is heading they look to really ramp up their offerings to fit in a variety of applications and SKUs. The last generation of G-series processors were based upon the Bobcat/Brazos platform. This two chip design (APU and media hub) came in a variety of wattages with good performance from both the CPU and GPU portion. While the setup looked pretty good on paper, it was not widely implemented because of the added complexity of a two chip design plus thermal concerns vs. performance.
AMD looks to address these problems with one of their first, true SOC designs. The latest G-series SOC’s are based upon the brand new Jaguar core from AMD. Jaguar is the successor to the successful Bobcat core which is a low power, dual core processor with integrated DX11/VLIW5 based graphics. Jaguar improves performance vs. Bobcat in CPU operations between 6% to 13% when clocked identically, but because it is manufactured on a smaller process node it is able to do so without using as much power. Jaguar can come in both dual core and quad core packages. The graphics portion is based on the latest GCN architecture.
AMD Exposes Richland
When we first heard about “Richland” last year, there was a little bit of excitement from people. Not many were sure what to expect other than a faster “Trinity” based CPU with a couple extra goodies. Today we finally get to see what Richland is. While interesting, it is not necessarily exciting. While an improvement, it will not take AMD over the top in the mobile market. What it actually brings to the table is better competition and a software suite that could help to convince buyers to choose AMD instead of a competing Intel part.
From a design standpoint, it is nearly identical to the previous Trinity. That being said, a modern processor is not exactly simple. A lot of software optimizations can be applied to these products to increase performance and efficiency. It seems that AMD has done exactly that. We had heard rumors that the graphics portion was in fact changed, but it looks like it has stayed the same. Process improvements have been made, but that is about the extent of actual hardware changes to the design.
The new Richland APUs are branded the A-5000 series of products. The top end is the A10-5750M with HD-8650 integrated graphics. This is still the VLIW-4 based graphics unit seen in the previous Trinity products, but enough changes have been made with software that I can enable Dual Graphics with the new Solar System based GPUs (GCN). The speeds of these products have received a nice boost. As compared to the previous top end A10-4600, the 5750 takes the base speed from 2.3 GHz to 2.5 GHz. Boost goes from 3.2 GHz up to 3.5 GHz. The graphics portion takes the base clock from 496 MHz up to 533 MHz, while turbo mode improves over the 4600 from 685 MHz to 720 MHz. These are not staggering figures, but it all still fits within the 35 watt TDP of the previous product.
One other important improvement is the ability to utilize DDR-3 1866 memory. Throughout the past year we have seen memory densities increase fairly dramatically without impacting power consumption. This goes for speed as well. While we would expect to see lower power DIMMs be used in the thin and light categories, expect to see faster DDR-3 1866 in the larger notebooks that will soon be heading our way.
The AMD Closed Loop System
Closed loop water cooling is not new, but it certainly is a pretty hot topic now. Some of the first units out there had some interesting issues (like internal corrosion clogging everything up), but once those teething problems were solved the closed loop systems turned out to be pretty effective and easy to install. Initially these units had the performance of a top end air cooler, but with a lot lower noise. The latest generation of liquid cooling systems (LCS) is now further improved and provides performance approaching that of larger, more complex cooling systems. These products will not replace exotic systems like phase change, but they provide a lot of cooling in a fairly decent sized package.
Clean lines and graphics give this box a striking look without being tacky.
Last year with the introduction of the AMD FX-8150, AMD decided to create a SKU which not only included the CPU, but also a fairly robust LCS. This unit is based on an Asetek design which features a double wide cooler/reservoir with the push-me/pull-ya fan combination. Other manufacturers offer this particular product under a variety of names, but this is simply an AMD FX branded unit with some small cosmetic changes to differentiate it from other units.
AMD will eventually offer this cooler with the new Vishera based FX-8350 CPU (or at least we assume they will), and we wanted to take this combination out for a spin. In our FX-8350 review we did not hit the overclocking targets that AMD had set. In most literature that we were provided AMD stated that most FX-8350 parts would be able to hit around 5 GHz with some aggressive cooling. In our review I was able to get to around 4.6 GHz max and around 4.5 GHz stable with better than average cooling. The results were not as impressive as we had hoped, but we again did not have a top end cooling solution such as what AMD provides with this particular LCS.
With a brand new LCS in hand, I retested the FX-8350 to see how hard it could be pushed. I also wanted to see how this particular unit performance in terms of thermal properties. The results were quite surprising for me, as this is my first real experience with a LCS.
Intel Board Team Creates New Form Factor
In many ways the desktop computer needs to evolve. Yes, I know that PC gaming is not only thriving and growing but for the majority of consumers the need to have a box in their office that measures 2' x 3' x 1', taking up leg room under the desk is...exaggerated. Intel thinks they have a solution for this, a new form factor for a PC they are calling the NUC - Next Unit of Computing.
By utilizing low power versions of the Intel Ivy Bridge mobile processors Intel has shrunk the desktop PC to a size even smaller than mini-ITX and hopes they can address various market segments with this new design.
Check out our video right here and continue on for the full written review!
While the consumer that simply needs a basic computing box is definitely a target for Intel and its board division, they are hoping to hit the mainstream markets with interactive displays, digital signage, marketing, analytics and more. And though the design we are looking at today has a very specific form factor, the low power boards themselves could easily be placed into nearly any industrial design.
For a size reference, the Intel NUC is a 4-in x 4-in design that is noticeably smaller than even the mini-ITX form factor that is quickly becoming popular in the DIY markets. The NUC does not have a removable processor though so what you buy is what you get with only a few components that are upgradeable.
Moving Towards BGA Only?
The sky is falling. Does this mean that Chicken Little is panicking for no reason or is Chicken Little the Cassandra of our time? It has been widely reported that Intel will not be offering the next generation Broadwell architecture as a LGA based product. Broadwell is a 14 nm product that will integrate southbridge functions into the chip, making it essentially a SOC. It will be offered only as a BGA only product, which means that it will be soldered onto a motherboard with no chance of being able to be swapped out. Broadwell is the successor to the upcoming Haswell, itself a 22 nm product that features many architectural changes to both the CPU and graphics portion as compared to the current 22 nm Ivy Bridge.
Will Broadwell be the death of the desktop industry and enthusiasts? Will LGA become as scarce as chicken teeth? Will we ever see a product with a swappable CPU after 2014?
Broadwell is aimed at TDPs ranging from 10 watts to 57 watts. Current high end Ivy Bridge parts max out at 77 watts and do not feature any southbridge type functionality. So that means that another 5 to 7 watts are added in for the chipset when discussing basic system TDPs. So we are looking at around 87 watts for a top end product when including SATA and USB functionality. 30 watts is a pretty big deal in OEM circles. We see right off the bat that Intel is aiming this architecture at a slightly different market, or at least a changing marketplace.
The unease that we are seeing is essentially this; Intel appears to be trying to take more profits from this setup and pass more costs onto the motherboard industry. This is not necessarily new for Intel, as they did this when transitioning to the LGA socket. LGA sockets are more expensive and more troublesome for the motherboard manufacturers as compared to a more traditional pin based interface. AMD continues to use pin based chips as this lowers the cost that is incurred by the motherboard manufacturers, and it also lowers overall support issues. LGAs are pretty solid, but it is very easy to bend one or more of those contacts so that they in fact do not create a solid connection with the CPU. This is something that is uncommon with pin based CPUS, but the downside of pin based is that it is more expensive to produce the CPU in the first place as compared to a LGA chip which only features the pads on the substrate of the CPU.
Ivy Bridge without the HD Graphics
The processor market is kind of stale these days; there aren't a lot of releases and the dominance of Intel in the high-end CPU market kind of makes things uninteresting. We still have lot of great AMD processors in the low and mid-range markets but if you want a $200+ card part you will probably find your way into the world of Intel.
Today's processor review cuts across segments with a unique twist. The Intel Core i5-3350P can be picked up at Newegg.com for $189 putting it right in the price point of the AMD FX-8150 (Zambezi) and the AMD FX-8320 (Vishera). It also undercuts the very popular Intel Core i5-3570K by $50 or so while still offering some impressive performance results.
The only catch: this Ivy Bridge based processor does not include any integrated graphics.
The Intel Core i5-3350P
Intel recently released a couple of Ivy Bridge based processors that have disabled the integrated graphics completely, the 3350P being one of them. This allows Intel to sell processor die that might have a defect on the GPU portion to increase the relative yield rate of their 22nm process and also gives them another weapon to fight off any pricing competition from AMD.
We go inside the Wii U
Last night after the midnight release of the new Nintendo Wii U gaming console, we did what any self respecting hardware fan would do: we tore it apart. That's right, while live on our PC Perspective Live! page, we opened up a pair of Wii U consoles, played a couple of games on the Deluxe while we took a tri-wing screwdriver to the second. Inside we found some interesting hardware (and a lot more screws) and at the conclusion of the 5+ hour marathon, we had a reassembled system with only a handful of leftover screws!
If you missed the show last night we have archived the entire video on our YouTube channel (embedded below) as well as the photos we took during the event in their full resolution glory. There isn't much to discuss about the teardown other than what we said in the video but I am going to leave a few comments after each set of four images.
OH! And if you missed the live event and want to be apart of another one, we are going to be holding a Hitman: Absolution Game Stream on our Live Page sponsored by AMD with giveaways like Radeon graphics cards and LOTS of game keys! Stop by again and see us on http://pcper.com/live on Tuesday the 20th at 8pm ET.
During the stream we promised photos of everything we did while taking it apart, so here you go! Click to get the full size image!
Getting inside the Wii U was surprisingly easy as the white squares over the screws were simply stickers and we didn't have to worry about any clips breaking, etc. The inside is dominated by the optical drive provided by Panasonic.
Bulldozer to Vishera
Bulldozer is the word. Ok, perhaps it is not “the” word, but it is “a” word. When AMD let that little codename slip some years back, AMD enthusiasts and tech journalists started to salivate about the possibilities. Here was a unique and very new architecture that promised excellent single thread performance and outstanding multi-threaded performance all in a package that was easy to swallow and digest. Probiotics for the PC. Some could argue that the end product for Bulldozer and probiotics are the same, but I am not overly fond of writing articles containing four letter colorful metaphors.
The long and short of Bulldozer is that it was a product that was pushed out too fast, it had specifications that were too aggressive for the time, and it never delivered on the promise of the architecture. Logically there are some very good reasons behind the architecture, but implementing these ideas into a successful product is another story altogether. The chip was never able to reach the GHz range it was supposed to and stay within reasonable TDP limits. To get the chip out in a timely manner, timings had to be loosened internally so the chip could even run. Performance per clock was pretty dismal, and the top end FX-8150 was only marginally faster than the previous top end Phenom II X6 1100T. In some cases, the X6 was still faster and a more competent “all around” processor.
There really was not a whole lot for AMD to do about the situation. It had to have a new product, and it just did not turn out as nicely as they had hoped. The reasons for this are legion, but simply put AMD is competing with a company that is over ten times the size, with the resulting R&D budgets that such a size (and margins) can afford. Engineers looking for work are a dime a dozen, and Intel can hire as many as they need. So, instead of respinning Bulldozer ad nauseum and releasing new speed grades throughout the year by tweaking the process and metal layer design, AMD let the product line sit and stagnate at the top end for a year (though they did release higher TDP models based on the dual module FX-4000 and triple module FX-6000 series). Engineers were pushed into more forward looking projects. One of these is Vishera.
Trinity Finally Comes to the Desktop
Trinity. Where to start? I find myself asking that question, as the road to this release is somewhat tortuous. Trinity, as a product code name, came around in early 2011. The first working silicon was shown that Summer. The first actual release of product was the mobile part in late Spring of this year. Throughout the summer notebook designs based on Trinity started to trickle out. Today we cover the release of the desktop versions of this product.
AMD has certainly had its ups and downs when it comes to APU releases. Their first real APU was Zacate, based on the new Bobcat CPU architecture. This product was an unmitigated success for AMD. Llano, on the other hand, had a pretty rocky start. Production and various supply issues caused it to be far less of a success than hoped. These issues were oddly enough not cleared up until late Spring of this year. By then mobile Trinity was out and people were looking towards the desktop version of the chip. AMD saw the situation, and the massive supply of Llano chips that it had, and decided to delay introduction of desktop Trinity until a later date.
To say that expectations for Trinity are high is an understatement. AMD has been on the ropes for quite a few years in terms of CPU performance. While the Phenom II series were at least competitive with the Core 2 Duo and Quad chips, they did not match up well against the latest i7/i5/i3 series of parts. Bulldozer was supposed to erase the processor advantage Intel had, but it came out of the oven as a seemingly half baked part. Piledriver was designed to succeed Bulldozer, and is supposed to shore up the architecture to make it more competitive. Piledriver is the basis of Trinity. Piledriver does sport significant improvements in clockspeed, power consumption, and IPC (instructions per clock). People are hopeful that Trinity would be able to match the performance of current Ivy Bridge processors from Intel, or at least get close.
So does it match Intel? In ways, I suppose. How much better is it than Bulldozer? That particular answer is actually a bit surprising. Is it really that much of a step above Llano? Yet another somewhat surprising answer for that particular question. Make no mistake, Trinity for desktop is a major launch for AMD, and their continued existence as a CPU manufacturer depends heavily on this part.
Ahead of the release of Windows 8 and the onslaught of Windows 8-based tablets that will hit the market next month, Intel is taking the cover off the processor that many of these new devices will be powered by, the Intel Atom Z2760 previously known by the codename of Clover Trail. Intel is claiming that the Atom Z2760 is the beginning of a completely new Atom direction, now a complete SoC (system-on-a-chip) design that lowers power requirements, extends battery life and allows Intel's x86 architecture to find its way into smaller and more portable devices.
At it's heart, Clover Trail is based on the same Saltwell CPU core design that was found in the Medfield processor powering a handful of smartphones over in Europe. That means the Atom lineup remains an in-order architecture with a dual-issue command structure - nothing incredibly revolutionary there.
Unlike Medfield though, the Atom Z2760 is a dual-core design that still enables HyperThreading for four-threaded operating system integration. The cores will run at 1.8 GHz and it includes 1MB of L2 cache divided between the two cores evenly. Memory is connected through a dual-channel 32-bit bus to low power DDR2 memory running at 800 MHz and capacities up to 2GB.
Trinity's GPU Performance
Editor's Note: Right before the release of this story some discussion has been ongoing at other hardware sites about the methods AMD employed with this NDA and release of information. Essentially, AMD allowed us to write about only the gaming benchmarks and specifications for the Trinity APU, rather than allowing the full gamut of results including CPU tests, power consumption, etc. Why? Obviously AMD wants to see a good message be released about their product; by release info in stages they can at least allow a brief window for that.
Does it suck that they did this? Yes. Do I feel like we should have NOT published this because of those circumstances? Not at all. Information is information and we felt that getting it to you as soon as possible was beneficial. Also, because the parts are not on sale today we are not risking adversely affecting your purchasing decision with these limited benchmarks. When the parts DO go on sale, you will have our full review with all the positives and negatives laid out before you, in the open.
This kind of stuff happens often in our world - NVIDIA sent out GTX 660 cards but not GTX 650s because of lack luster performance for example - and we balance it and judge it on a case by case basis. I don't think anyone looking at this story sees a "full review" and would think to make a final decision about ANY product from it. That's not the goal. But just as we sometimes show you rumored specs and performance numbers on upcoming parts before the NDAs expire, we did this today with Trinity - it just so happens it was with AMD's blessing.
AMD has graciously allowed us the chance to give readers a small glimpse at the performance of the upcoming A series APUs based on the Trinity processor. Today we are covering the SKUs that will be released, general gaming performance, and what kind of power consumption we are seeing as compared to the previous Llano processor and any Intel processor we can lay hands upon.
Trinity is based on the updated Piledriver architecture, which is an update to Bulldozer. Piledriver improves upon IPC by a small amount over Bulldozer, but the biggest impact is that of power consumption and higher clockspeeds. It was pretty well known that Bulldozer did not hit the performance expectations of both AMD and consumers. Part of this was due to the design pulling more power at the target clockspeeds than was expected. To remedy this, AMD lowered clockspeeds. Piledriver fixes most of those power issues, as well as sprinkles some extra efficiency into the design, so that clockspeeds can scale to speeds that will make these products more competitive with current Intel offerings.
The top end model that AMD will be offering of the socket FM2 processors (for the time being) is the A10 5800K. This little number is a dual module/quad core processor running at 3.8 GHz with a turbo speed of 4.2 GHz. We see below the exact model range of products that AMD will be offering. This does not include the rumored Athlon II editions that will have a disabled GPU onboard. Each module features 2 MB of L2 cache, for a total of 4 MB on the processor. The A10 series does not feature a dedicated L3 cache as the FX processors do. This particular part is unlocked as well, so expect some decent overclocking right off the bat.
The A10 5800K features the VLIW 4 based graphics portion, which is significantly more efficient than the previous VLIW 5 based unit in Llano (A8 3870K and brethren). Even though it features the same number of stream processors as the 3870K, AMD is confident that this particular unit is upwards of 20% faster than the previous model. This GPU portion is running at a brisk 800 MHz. The GPU core is also unlocked, so expect some significant leaps in that piece of the puzzle as well.
That is about all I can give out at this time, since this is primarily based on what we see in the diagram and what we have learned from the previous Trinity release (for notebooks).
Apple Produces the new A6 for the iPhone 5
Today is the day that world gets introduced to the iPhone 5. I of course was very curious about what Apple would be bringing to market the year after the death of Steve Jobs. The excitement leading up to the iPhone announcement was somewhat muted as compared to years past, and a lot of that could be attributed to what has been happening in the Android market. Companies like Samsung and HTC have released new high end phones that are not only faster and more expansive than previous versions, but they also worked really well and were feature packed. While the iPhone 5 will be another success for Apple, for those somewhat dispassionate about the cellphone market will likely just shrug and say to themselves, “It looks like Apple caught up for the year, but too bad they really didn’t introduce anything really groundbreaking.”
If there was one area that many were anxiously awaiting, it was that of the SOC (system on a chip) that Apple would use for the iPhone 5. Speculation went basically from using a fresh piece of silicon based on the A5X (faster clocks, smaller graphics portion) to having a quad core monster running at high speeds but still sipping power. It seems that we actually got something in between. This is not a bad thing, but as we go forward we will likely see that the silicon again only matches what other manufacturers have been using since earlier this year.
Ah, IDF – the Intel Developer Forum. Almost every year–while I sit in slightly uncomfortable chairs and stare at outdated and color washed projector screens–information is passed on about Intel's future architectures, products and technologies. Last year we learned the final details about Ivy Bridge, and this year we are getting the first details about Haswell, which is the first architecture designed by Intel from the ground up for servers, desktops, laptops, tablets and phones.
While Sandy Bridge and Ivy Bridge were really derivatives of prior designs and thought processes, the Haswell design is something completely different for the company. Yes, the microarchitecture of Haswell is still very similar to Sandy Bridge (SNB), but the differences are more philosophical rather than technological.
Intel's target is a converged core: a single design that is flexible enough to be utilized in mobility devices like tablets while also scaling to the performance levels required for workstations and servers. They retain the majority of the architecture design from Sandy Bridge and Ivy Bridge including the core design as well as the key features that make Intel's parts unique: HyperThreading, Intel Turbo Boost, and the ring interconnect.
The three pillars that Intel wanted to address with Haswell were performance, modularity, and power innovations. Each of these has its own key goals including improving performance of legacy code (existing), and having the ability to extract greater parallelism with less coding work for developers.
Ah, the end of August. School is about to start. American college football is about to get underway. Hot Chips is now in full swing. I guess the end of August caters to all sorts of people. For the people who are most interested in Hot Chips, the amount of information on next generation CPU architectures is something to really look forward to. AMD is taking this opportunity to give us a few tantalizing bits of information about their next generation Steamroller core which will be introduced with the codenamed “Kaveri” APU due out in 2013.
AMD is seemingly on the brink of releasing the latest architectural update with Vishera. This is a Piledriver+ based CPU that will find its way into AM3+ sockets. On the server side it is expected that the Abu Dhabi processors will also be released in a late September timeframe. Trinity was the first example of a Piledriver based product, and it showed markedly improved thermals as compared to previous Bulldozer based products, and featured a nice little bump in IPC in both single and multi-threaded applications. Vishera and Abu Dhabi look to be Piledriver+, which essentially means that there are a few more tweaks in the design that *should* allow it to go faster per clock than Trinity. There have been a few performance leaks so far, but nothing that has been concrete (or has shown final production-ready silicon).
Until that time when Vishera and its ilk are released, AMD is teasing us with some Steamroller information. This presentation is featured at Hotchips today (August 28). It is a very general overview of improvements, but very few details about how AMD is achieving increased performance with this next gen architecture are given. So with that, I will dive into what information we have.