All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Choosing the Right Platform
Despite what most people may think, our personal workstations here at the PC Perspective offices aren’t exactly comprised of cutting edge hardware. Just as in every other production environment, we place a real benefit on stability with the machines that we write, photo edit, and in this case, video edit on.
The current video editing workstation for PC Perspective offices is quite old when you look at the generations upon generations of hardware we have reviewed in the years since it was built. In fact, it has hardly been touched since early 2011. Built around the then $1000 Intel Core-i7 990X, 24GB of DDR3, a Fermi-based NVIDIA Quadro 5000, and a single 240gb SandForce 2 based SSD, this machine has edited a lot of 1080p video for us with little problems.
However, after starting to explore the Panasonic GH4 and 4K video a few months ago, the age of this machine became quite apparent. Real-time playback of high bit rate 4K content was choppy at best, and scrubbing through the timeline next to impossible. Transcoding to a lower resolution mezzanine file, or turning down the playback quality in Premiere Pro worked to some extent, but made the visual quality we gained more difficult to deal with. It was clear that we were going to need a new workstation sooner than later.
The main question was what platform to build upon. My initial thought was to build using the 8-core Intel Core i7-5960X and X99 platform. The main application we use, Adobe Premiere Pro (and it’s associated Media Encoder app) are very multithreaded. Going from 6-cores with the i7-990X to 8-cores with the i7-5960S with modest improvement in IPC didn’t seem like a big enough gain nor very future proof.
Luckily, we had a pair of Xeon E5-2680v2’s around from another testbed that had been replaced. These processors each provide 10 cores (Hyperthreading enabled for a resulting 20 threads each) at a base frequency of 2.8GHz, with the ability to boost up to 3.6GHz. By going with two of these processors in a dual CPU configuration, we will be significantly increasing our compute power and hopefully providing some degree of future proofing. Plus, we already use the slightly higher clocked Xeon E5-2690v2’s in our streaming server, so we have some experience with a very similar setup.
Taking Racing Games a Step Further
I remember very distinctly the first racing game I had ever played and where. It was in the basement of a hotel in Billings, MT where I first put a couple of quarters through the ATARI Night Driver arcade machine. It was a very basic simulator with white dots coming at you as if they were reflectors on poles. The game had a wheel and four gears available through a shifter. It had an accelerator and no brake. It was the simplest racing game a person could play. I was pretty young, so it was not as fun to me because I did not do well actually playing it. Like most kids that age, fun is in the anticipation of playing and putting the quarter in rather than learning the intricacies of a game.
Throughout the years there were distinct improvements. I played Pole Position and Enduro on the ATARI 2600, I had my first PC racer with Test Drive (the Ferrari Testarossa was my favorite vehicle) using only the keyboard. I took a break for a few years and did not get back into racing games until I attended the 3dfx T-buffer demo when I saw the latest NFS 4 (High Stakes) played at 1024x768 with AA enabled. Sure, it looked like the cars were covered in baby oil, but that was not a bad thing at the time.
One of the real breakthrough titles for me was NFS: Porsche Unleashed. EA worked with Porsche to create a game that was much closer to a simulation than the previous arcade racers. It was not perfect, but it was one of the first titles to support Force Feedback in racing. I purchased a Microsoft Sidewinder Force Feedback 2 joystick. The addition of FFB was a tremendous improvement in the game as I could feel the tires start to slip and experience the increased resistance to turns. This was my first real attempt at a racing game and actually completing it. I still have fond memories and it would be great to get a remastered version with better graphics and physics, while still retaining the simulation roots.
After PU I again stopped playing racers. The release of Project Gotham racing for the XBox rekindled that a bit, but I soon tired of the feel of the controller and the rumble rather than real FFB effects. Fast forward to Quakecon 2009 when I saw the first gameplay videos of the upcoming DiRT 2. This title was one of the first to adopt DX11 that would push the HD 5800 and GTX 480 video cards for all they were worth. This re-ignited my desire to race. I purchased DiRT 2 as soon as it was available for the PC and played with the aging (but still solid) Sidewinder FFB P2.
The box was a little beat up when it got to me, but everything was intact.
Something was missing though. I really wanted more out of my racing game. The last time I had used a wheel on a racing game was probably an Outrun arcade machine in the late 80s. I did some shopping around and decided on the Thrustmaster F430 Ferrari FFB wheel. It was on sale at the time for a low, low price of $76. It had a 270 degree rotation which is more apt for arcade racers than sims, but it was a solid wheel for not a whole lot of money. It was a fantastic buy for the time and helped turn me into a racing enthusiast.
During this time I purchased my kids a couple of low end wheels that use the bungee cord centering mechanism. These of course lack any FFB features, but the Genius one I acquired was supposed to have some basic feedback and rumble effects: it never worked as such. So, my experience to this point has been joysticks, bungee wheels, and a 270 degree F430 wheel. This does not make me an expert, but it does provide an interesting background for the jump to a higher level of product.
A Diverse Lineup
ThinkPads have always been one of our favorite notebook brands here at PC Perspective. While there certainly has been some competition from well-designed portables such as the Dell XPS 13 and Microsoft Surface Pro 3, the ThinkPad line remains a solid choice for power users.
We had the chance to look at a lot of Lenovo's ThinkPad lineup for Broadwell, and as this generation comes to a close we decided to give a brief overview of the diversity available. Skylake-powered notebooks may be just on the horizon, but the comparisons of form factor and usability should remain mostly applicable into the next generation.
Within the same $1200-$1300 price range, Lenovo offers a myriad of portable machines with roughly the same hardware in vastly different form factors.
First, let's take a look at the more standard ThinkPads.
Lenovo ThinkPad T450s
The ThinkPad T450s is my default recommendation for anyone looking for a notebook in the $1000+ range. Featuring a 14" 1080p display and an Intel Core i5-5300U processor, it will perform great for the majority of users. While you won't be using this machine for 3D Modeling or CAD/CAM applications, general productivity tasks will feel right at home here.
Technically classified as an Ultrabook, the T450s won't exactly be turning any heads with it's thinness. Lenovo strikes a balance here, making the notebook as thin as possible at 0.83" while retaining features such as a gigabit Ethernet port, 3 USB 3.0 Ports, an SD card reader, and plenty of display connectivity with Mini DisplayPort and VGA.
For multi-device users
One of the things that we still wrestle with here at PC Perspective is keeping a host of phones, tablets and mobile gaming devices charged and ready to go when we need them. Reviewing items means we need to have multiple devices ready to go to run tests and benchmarks at any given time. Keeping that collection of technology powered up can be a pain in the rear - adapters everywhere, cables strewn across the shelf, etc.
The same is true for me at home - even though we are only a two adult household, my wife and I each have a tablet we use regularly, smartphones and a host of accessories like wireless headphones, smart watches and more. And when company comes over it is expected that at least someone will need to top off the power to their phone.
Skiva has a USB charging accessory to help alleviate much of the headache involved with these situations. The Powerflow 7 Stand Charger combines a 7-port USB charger capable of 2.4A to each port with a simple stand to support 7 tablets and phones vertically. The result is a neatly organized set of hardware that is accessible when you need it.
Handcrafted in Brooklyn, NY
First impressions usually count for a lot, correct? Well, my first impression of a Grado product was not all that positive. I had a small LAN party at my house one night and I invited over the audio lead for Ritual Entertainment and got him set up on one of the test machines. He pulled out a pair of Grado SR225 headphones and plugged them in. I looked at them and thought, “Why does this audio guy have such terrible headphones?” Just like most others that have looked at Grados the first time, I thought these were similar to a set of WWII headsets, and likely sounded about as good. I offered my friend a more “gaming friendly” set of headphones. He laughed at me and said no thanks.
The packaging is relatively bland as compared to other competing "high end" headphones. Grado has a reputation of under-promising, yet overperforming.
I of course asked him about his headphones that he was so enamored with and he told me a little bit about how good they actually were and that he was quite happy to game on them. This of course got me quite interested in what exactly Grado had to offer. Those “cheap looking” headphones are anything but cheap. While the aesthetics can be debated, but what can’t be is that Grado makes a pretty great series of products.
Grado was founded by Joseph Grado in 1953. Sadly, Joseph passed away this year. Though he had been retired for some time, the company is still family owned and we are now seeing the 3rd generation of Grados getting involved in the day to day workings of the company. The headquarters was actually the site of the family fruit business before Joseph decided to go into the audio industry. They originally specialized in phonograph heads as well as other phono accessories, and it wasn’t until 1989 that Grado introduced their first headphones. Headphones are not exactly a market where there are massive technological leaps, so it appears as though there has been around three distinct generations of headphone designs from Grado with the Prestige series. The originals were introduced in the mid-90s then in the mid 2000s with the updated “i” series, and finally we have the latest “e” models that were released last year.
The company also offers five different lines of headphones that range from the $50 eGrado up to the $1700 PS1000E. They also use a variety of materials from plastic, to metal, and finally the very famous wood based headphones. In fact, they have a limited edition Grado Heritage run that was made from a maple tree cut down in Brooklyn very near to the workshop where Grado still handcrafts their headphones.
That townhouse in the middle? That is where the vast majority of Grado headphones are made. Not exactly what most expect considering the reputation of the Grado brand. (Photo courtesy of Jonathan Grado)
I was sent the latest SR225e models to take a listen to some time back. I finally got to a place where I could just sit down and pen about my thoughts and experience with these headphones.
Killing those end of summer blues
As we approach the end of summer and the beginning of the life of Windows 10, PC Perspective and Gigabyte (along with Thermaltake and Kingston) have teamed up to bring our readers a system build guide and giveaway that is sure to get your gears turning. If you think that an X99-based system with an 8-core Intel Extreme processor, SLI graphics, 480GB SSD and 32GB of memory sounds up your alley...pay attention.
Deep in thought...
Even with the dawn of Skylake nearly upon us, there is no debate that the Haswell-E platform will continue to be the basis of the enthusiasts dream system for a long time. Lower power consumption is great, but nothing is going to top 8-cores, 16-threads and all the PCI Express lanes you could need for expansion to faster storage and accessories. With that in mind Gigabyte has partnered with PC Perspective to showcase the power of X99 and what a builder today can expect when putting together a system with a fairly high budget, but with lofty goals in mind as well.
Let's take a look at the components we are using today.
|Gigabyte X99 System Build|
|Processor||Intel Core i7-5960X - $1048|
|Motherboard||Gigabyte X99 Gaming 5P - $309|
|Memory||Kingston HyperX Fury DDR4-2666 32GB - $325|
|Graphics Card||2 x Gigabyte G1 Gaming GTX 960 2GB - $199|
|Storage||Kingston HyperX Savage 480GB SSD - $194|
|Case||Thermaltake Core V51 - $82|
|Power Supply||Thermaltake Toughpower Grand 850 watt - $189|
|CPU Cooler||Thermaltake Water 3.0 Extreme S - $94|
|Total Price||$1591 - Amazon Full Card (except CPU)
$1048 - Amazon Intel Core i7-5960X
Grand Total: $2639
After spending some time in the computer hardware industry, it's easy to become jaded about trade shows and unannounced products. The vast majority of hardware we see at events like CES every year is completely expected beforehand. While this doesn't mean that these products are bad by any stretch, they can be difficult to get excited about.
Everyone once and a while however, we find ourselves with our hands on something completely unexpected. Hidden away in a back room of Lenovo's product showcase at CES this year, we were told there was a product would amaze us — called the LaVie.
And they were right.
Unfortunately, the Lenovo LaVie-Z is one of those products that you can't truly understand until you get it in your hands. Billed as the world's lightest 13.3" notebook, the standard LaVie-Z comes in at a weight of just 1.87 lbs. The touchscreen-enabled LaVie-Z 360 gains a bit of weight, coming in at 2.04 lbs.
While these numbers are a bit difficult to wrap your head around, I'll try to provide a bit of context. For example, the Google Nexus 9 weighs .94 lbs. For just over twice the weight as Google's flagship tablet, Lenovo has provided a full Windows notebook with an i7 ultra mobile processor.
Furthermore the new 12" Apple MacBook which people are touting as being extremely light comes in at 2.03 lbs, almost the same weight as the touchscreen version of the LaVie-Z. For the same weight, you also gain a much more powerful Intel i7 processor in the LaVie, when compared to the Intel Core-M option in the MacBook.
All of this comes together to provide an experience that is quite unbelievable. Anyone that I have handed one of these notebooks to has been absolutely amazed that it's a real, functioning computer. The closest analog that I have been able to come up with for picking up the LaVie-Z is one of the cardboard placeholder laptops they have at furniture stores.
The personal laptop that I carry day-to-day is a 11" MacBook Air, which only weighs 2.38 lbs, but the LaVie-Z feels infinitely lighter.
However, as impressive as the weight (or lack thereof) of the LaVie-Z is, let's dig deeper into what the experience of using the world's lightest notebook.
Introduction, Packaging, and A Closer Look
We haven’t had a chance to sit down with any racing wheels for quite some time here at PC Perspective. We have an old Genius wheel on a shelf in the back of our closet here at the office. Ryan played around with that a few years back, and that was the extent of the racing wheel usage here at home base. Josh, on the other hand, frequents driving sims with a Thrustmaster F430. I hadn’t ventured into racing sims, though I do dabble with the real thing a bit.
Given our previous Logitech coverage, and especially following our recent Q&A covering the new LogitechG line, it only made sense for us to take a look at the new Logitech G29 Driving Force Racing Wheel.
Today we are covering the G29, which is a PS3/PS4/PC specific model from Logitech. There is an Xbox/PC variant coming soon in the form of the G920, with will have a different (fewer) button layout and no LED RPM/shift display.
A few years ago, we took our first look at the inexpensive 27" 1440p monitors which were starting to flood the market via eBay sellers located in Korea. These monitors proved to be immensely popular and largely credited for moving a large number of gamers past 1080p.
However, in the past few months we have seen a new trend from some of these same Korean monitor manufacturers. Just like the Seiki Pro SM40UNP 40" 4K display that we took a look at a few weeks ago, the new trend is large 4K monitors.
Built around a 42-in LG AH-IPS panel, the Wasabi Mango UHD420 is an impressive display. Inclusion of HDMI 2.0 and DisplayPort 1.2 allow you to achieve 4K at a full 60Hz and 4:4:4 color gamut. At a cost of just under $800 on Amazon, this is an incredibly appealing value.
Whether or not the UHD420 is a TV or a monitor is actually quite the tossup. The lack of a tuner
might initially lead you to believe it's not a TV. Inclusion of a DisplayPort connector, and USB 3.0 hub might make you believe it's a monitor, but it's bundled with a remote control (entirely in Korean). In reality, this display could really be used for either use case (unless you use OTA tuning), and really starts to blur the lines between a "dumb" TV and a monitor. You'll also find VESA 400x400mm mounting holes on this display for easy wall mounting.
Logitech Focuses in on Gaming
Logitech has been around seemingly forever. The Swiss based company is ubiquitous in the peripherals market, providing products ranging from keyboards and mice, to speakers and headsets. There is not much that the company does not offer when it comes to PC peripherals. Their 3 button mice back in the day were considered cutting edge that also happened to be semi-programmable. Since that time we have seen them go from ball mice, to optical mice, to the latest laser based products that offer a tremendous amount of precision.
Gaming has become one of the bigger movers for Logitech, and they have revamped their entire lineup as well as added a few new products to hopefully cash in on the popularity of modern gaming. To further address this market Logitech has designed and marketed a new batch of gaming headsets. These promise to be moderately priced, but high quality products that bear the Logitech name. We go from the very basic up to the top 7.1 wireless products. Originally these covered a pretty significant price range, but lately the discounts have been extremely deep. The lowest end gaming headset is at $40US while the 7.1 wireless model comes in around $90 US.
I am looking at two models today that span the lowest end to the 2nd highest. The first headset is the G230 analog set. The second is the G35 wired 7.1 USB with Dolby Headphone technology. I have never been a fan of wireless headphones, but the G35 should be a fairly good approximation of the performance of that part.
My goal is to look at these two wired units and see what Logitech can offer at these two very affordable price points.
Introduction, Specifications, and Packaging
Lexar is Micron’s brand covering SD Cards, microSD Cards, USB flash drives, and card readers. Their card readers are known for being able to push high in the various speed grades, typically allowing transfers (for capable SD cards) much faster than what a typical built-in laptop or PC SD card reader is capable of. Today we will take a look at the Lexar ‘Professional Workflow’ line of flash memory connectivity options from Lexar.
This is essentially a four-bay hub device that can accept various card readers or other types of devices (a USB flash storage device as opposed to just a reader, for example). The available readers range from SD to CF to Professional Grade CFast cards capable of over 500 MB/sec.
We will be looking at the following items today:
- Professional Workflow HR2
- Four-bay Thunderbolt™ 2/USB 3.0 reader and storage drive hub
- Professional Workflow UR1
- Three-slot microSDHC™/microSDXC™ UHS-I USB 3.0 reader
- Professional Workflow SR1
- SDHC™/SDXC™ UHS-I USB 3.0 reader
- Professional Workflow CFR1
- CompactFlash® USB 3.0 reader
- Professional Workflow DD256
- 256GB USB 3.0 Storage Drive
Note that since we were sampled these items, Lexar has begun shipping a newer version of the SR1. The SR2 is a SDHC™/SDXC™ UHS-II USB 3.0 reader. Since we had no UHS-II SD cards available to test, this difference would not impact any of our testing speed results. There is also an HR1 model which has only USB 3.0 support and no Thunderbolt, coming in at a significantly lower cost when compared with the HR2 (more on that later).
One hub to rule them all!
Inateck sent along a small group of connectivity devices for us to evaluate. One such item was their HB7003 7 port USB 3.0 hub:
This is a fairly standard powered USB hub with one exception - high speed charging. Thanks to an included 36W power adapter and support for Battery Charging Specification 1.2, the HB7003 can charge devices at up to 1.5 Amps at 5 Volts. This is not to be confused with 'Quick Charging', which uses a newer specification and more unique hardware.
- L/W/H: 6.06" x 1.97" x 0.83"
- Ports: 7
- Speed: USB 3.0 5Gbps (backwards compatible with USB 2.0 and 1.1)
- Windows Vista / OSX 10.8.4 and newer supported without drivers
Densely packed brown box. Exactly how such a product should be packaged.
Power adapter (~6 foot cord), ~4.5 foot USB 3.0 cord, instruction manual, and the hub itself.
Some quick charging tests revealed that the HB7003 had no issue exceeding 1.0 Amp charging rates, but fell slightly short of a full 1.5A charge rate due to the output voltage falling a little below the full 5V. Some voltage droop is common with this sort of device, but it did have some effect. In one example, an iPad Air drew 1.3A (13% short of a full 1.5A). Not a bad charging rate considering, but if you are expecting a fast charge of something like an iPad, its dedicated 2.1A charger is obviously the better way to go.
Performance and Usability:
As you can see above, even though the port layout is on a horizontal plane, Inateck has spaced the ports enough that most devices should be able to sit side by side. Some wider devices may take up an extra port, but with seven to work with, the majority of users should have enough available ports even if one or two devices overlap an adjacent port. In the above configuration, we had no issue saturating the throughput to each connected device. I also stepped up to a Samsung USB T1 which also negotiated at the expected USB 3.0 speeds.
Pricing and Availability
- $34.99 (Amazon)
Inateck is selling it these direct from their Amazon store (link above).
- Clean design 7-port USB 3.0 hub.
- Port spacing sufficient for most devices without interference.
- 1.5A per port charging.
- Low cost.
- 'Wall wart' power adapter may block additional power strip outlets.
At just $35, the Inateck HB7003 is a good quality 7-port USB 3.0 hub. All ports can charge devices at up to 1.5A while connecting them to the host at data rates up to 5 Gbps. The only gripe I had was that the hub was a bit on the light weight side and as a result it easily slid around on the desk when the attached cords were disturbed, but some travelers might see light weight as a bonus. Overall this is a simple, no frills USB 3.0 hub that gets the job done nicely.
Announced just this past June at last year’s Google I/O event, Android TV is a platform developed by Google, running Android 5.0 and higher, that aims to create an interactive experience for the TV. This platform can be built into a TV directly as well as into set-top style boxes, like the NVIDIA SHIELD we are looking at today. The idea is to bring the breadth of apps and content to the TV through the Android operating system in a way that is both convenient and intuitive.
NVIDIA announced SHIELD back in March at GDC as the first product to use the company’s latest Tegra processor, the X1. This SoC combines an 8-core big.LITTLE ARM processor design with a 256-core implementation of the NVIDIA Maxwell GPU architecture, providing GPU performance previously unseen in an Android device. I have already spent some time with the NVIDIA SHIELD at various events and the promise was clearly there to make it a leading option for Android TV adoption, but obviously there were questions to be answered.
Today’s article will focus on my early impressions with the NVIDIA SHIELD, having used it both in the office and at home for a handful of days. As you’ll see during the discussion there are still some things to be ironed out, some functionality that needs to be added before SHIELD and Android TV can really be called a must-buy product. But I do think it will get there.
And though this review will focus on the NVIDIA SHIELD, it’s impossible not to marry the success of SHIELD with the success of Google’s Android TV. The dominant use case for SHIELD is as a media playback device, with the gaming functionality as a really cool side project for enthusiasts and gamers looking for another outlet. For SHIELD to succeed, Google needs to prove that Android TV can improve over other integrated smart TV platforms as well as other set-top box platforms like Boxee, Roku and even the upcoming Apple TV refresh.
But first, let’s get an overview of the NVIDIA SHIELD device, pricing and specifications, before diving into my experiences with the platform as a whole.
High Bandwidth Memory
UPDATE: I have embedded an excerpt from our PC Perspective Podcast that discusses the HBM technology that you might want to check out in addition to the story below.
The chances are good that if you have been reading PC Perspective or almost any other website that focuses on GPU technologies for the past year, you have read the acronym HBM. You might have even seen its full name: high bandwidth memory. HBM is a new technology that aims to turn the ability for a processor (GPU, CPU, APU, etc.) to access memory upside down, almost literally. AMD has already publicly stated that its next generation flagship Radeon GPU will use HBM as part of its design, but it wasn’t until today that we could talk about what HBM actually offers to a high performance processor like Fiji. At its core HBM drastically changes how the memory interface works, how much power is required for it and what metrics we will use to compare competing memory architectures. AMD and its partners started working on HBM with the industry more than 7 years ago, and with the first retail product nearly ready to ship, it’s time to learn about HBM.
We got some time with AMD’s Joe Macri, Corporate Vice President and Product CTO, to talk about AMD’s move to HBM and how it will shift the direction of AMD products going forward.
The first step in understanding HBM is to understand why it’s needed in the first place. Current GPUs, including the AMD Radeon R9 290X and the NVIDIA GeForce GTX 980, utilize a memory technology known as GDDR5. This architecture has scaled well over the past several GPU generations but we are starting to enter the world of diminishing returns. Balancing memory performance and power consumption is always a tough battle; just ask ARM about it. On the desktop component side we have much larger power envelopes to work inside but the power curve that GDDR5 is on will soon hit a wall, if you plot it far enough into the future. The result will be either drastically higher power consuming graphics cards or stalling performance improvements of the graphics market – something we have not really seen in its history.
While it’s clearly possible that current and maybe even next generation GPU designs could still have depended on GDDR5 as the memory interface, the move to a different solution is needed for the future; AMD is just making the jump earlier than the rest of the industry.
Introduction and First Impressions
The ASUS ROG Gladius mouse features sleek styling and customizable lighting effects, but the biggest aspect is the underlying technology. With socketed Omron switches designed to be easily swapped and an adjustable 6400dpi optical sensor this gaming mouse offers a lot on paper. So how does it feel? Let's find out.
There are a few aspects to the way a mouse feels, including the shape, surface material, and overall weight. Beyond the physical properties there is the speed and accuracy of the sensor (which also affects hand movement) and of course the mouse buttons and scroll wheel. Really, there's a lot going on with a modern gaming mouse - a far cry from the "X-Y position indicator" that the inventors had nicknamed "mouse" in the 1960s.
One of the hallmarks of the ASUS ROG (Republic of Gamers) lineup is the sheer amount of additional features the products tend to have. I use an ROG motherboard in my personal system, and even my micro-ATX board is stuffed with additional functionality (and the box is loaded with accessories). So it came as no surprise to me when I opened the Gladius mouse and began to look it over. Sure, the box contents aren't as numerous as one of the Maximus motherboards, but there's still quite a bit more than I've encountered with a mouse before.
Or: How to fall asleep at work.
I will be the first to admit that just a couple of weeks ago I had zero need for a gaming chair. But when 4GamerGear.com offered to send us one of the AKracing AK-6014 ergonomic executive units, I agreed. I went out of town for a week and returned to find the chair assembled and already in use by Ken, our go to video editor and engineer. Of course I had to steal it from him to take part in the "review" process and the results were great! As I sit here now in my Ikea office chair, writing up this post, while Ken sits just feet away tapping away on some edits, I can't help but want to use my authority to take it back.
The price is steep, but the added comfort you get from a chair like the AKracing model we tested is substantial. Every part of the design, based on a racing seat for a car, is built to keep you in place. But instead of preventing lateral movements caused from taking corners, this is more to keep your butt in place and your back straight to encourage good posture. The arm rests are height adjustable (as is the seat itself of course) and the back reclines for different desk and resting positions. You can lay it PAST flat for naps if you're into that kind of thing.
You can find these chairs for sale on Amazon in different color combinations with a current price of $349. It's expensive, I can't deny that. But it looks and feels way cooler than what you are sitting in right now. And aren't you worth it?
No Longer the Media Center of Attention
Gabe Aul, of Microsoft's Windows Insiders program, has confirmed on Twitter that Windows 10 will drop support for Windows Media Center due to a decline in usage. This is not surprising news as Microsoft has been deprecating the Media Center application for a while now. In Windows 8.x, the application required both the “Pro” SKU of the operating system, and then users needed to install an optional add-on above and beyond that. The Media Center Pack cost $10 over the price of Windows 8.x Pro unless you claimed a free license in the promotional period surrounding Windows 8's launch.
While Media Center has been officially abandoned, its influence on the industry (and vice versa) is an interesting story. For a time, it looked like Microsoft had bigger plans that were killed by outside factors and other companies seem to be eying the money that Microsoft left on the table.
There will be some speculation here.
We could go back to the days of WebTV, but we won't. All you need to know is that Microsoft lusted over the living room for years. Windows owned the office and PC gaming was taking off with strong titles (and technologies) from Blizzard, Epic, iD, Valve, and others. DirectX was beloved by developers, which led to the original Xbox. Their console did not get a lot of traction, but they respected it as a first-generation product that was trying to acquire a foothold late in a console generation. Financially, the first Xbox would cost Microsoft almost four billion dollars more than it made.
At the same time, Microsoft was preparing Windows to enter the living room. This was the company's power house and it acquired significant marketshare wherever it went, due to its ease of development and its never-ending supply of OEMs, even if the interface itself was subpar. Their first attempt at bringing Windows to the living room was Windows XP Media Center Edition. This spin-off of Windows XP could only be acquired by OEMs to integrate into home theater PCs (HTPCs). The vision was interesting, using OEM competition to rapidly prototype what users actually want in a PC attached to a TV.
This leads us to Windows Vista, which is where Media Center came together while the OS fell apart.
Who Should Care? Thankfully, Many People
The Khronos Group has made three announcements today: Vulkan (their competitor to DirectX 12), OpenCL 2.1, and SPIR-V. Because there is actually significant overlap, we will discuss them in a single post rather than splitting them up. Each has a role in the overall goal to access and utilize graphics and compute devices.
Before we get into what everything is and does, let's give you a little tease to keep you reading. First, Khronos designs their technologies to be self-reliant. As such, while there will be some minimum hardware requirements, the OS pretty much just needs to have a driver model. Vulkan will not be limited to Windows 10 and similar operating systems. If a graphics vendor wants to go through the trouble, which is a gigantic if, Vulkan can be shimmed into Windows 8.x, Windows 7, possibly Windows Vista despite its quirks, and maybe even Windows XP. The words “and beyond” came up after Windows XP, but don't hold your breath for Windows ME or anything. Again, the further back in Windows versions you get, the larger the “if” becomes but at least the API will not have any “artificial limitations”.
Outside of Windows, the Khronos Group is the dominant API curator. Expect Vulkan on Linux, Mac, mobile operating systems, embedded operating systems, and probably a few toasters somewhere.
On that topic: there will not be a “Vulkan ES”. Vulkan is Vulkan, and it will run on desktop, mobile, VR, consoles that are open enough, and even cars and robotics. From a hardware side, the API requires a minimum of OpenGL ES 3.1 support. This is fairly high-end for mobile GPUs, but it is the first mobile spec to require compute shaders, which are an essential component of Vulkan. The presenter did not state a minimum hardware requirement for desktop GPUs, but he treated it like a non-issue. Graphics vendors will need to be the ones making the announcements in the end, though.
The ASUS STRIX TACTIC PRO is a premium mechanical gaming keyboard featuring Cherry MX Brown switches and some serious style.
Keyboards are a very personal thing, and as this is one of the three primary interfaces with the system itself (along with the mouse and display), feel will help decide the experience. Without a doubt mechanical keyboard have become very popular with enthusiasts, but as more manufacturers have started offering them - and the market has begun to saturate - it becomes much more difficult to pick a starting point if you're new to the game. To further complicate a buying decision there are different types of key switches used in these keyboards, and each variety has its own properties and unique feel.
And on the subject of key switches, this particular keyboard built with the brown variety of the Cherry MX switches, and ASUS offers the option of Cherry MX Black, Blue, and Red switches with the STRIX TACTIC PRO as well. Our own Scott Michaud covered the topic of key switches in great detail last year, and that article is a great starting point that helps explain the different types of switches available, and how they differ.
The Cherry MX Brown switch in action
I'll go into the feel of the keyboard on the next page, but quickly I'll say that MX Brown switches have a good feel without being too "clicky", but they are certainly more stiff feeling than a typical membrane keyboard. While it's impossible to really describe how the keyboard will feel to a particular user, we can certainly cover the features and performance of this keyboard to help with a purchasing decision in this crowded market. At $150 the STRIX TACTIC PRO carries a premium price, but as you'll see this is also a premium product.
Introducing Windows 10 (Again)
I did not exactly make too many unsafe predictions, but let's recap the Windows 10 Consumer announcement anyway. The briefing was a bit on the slow side, at least if you are used to E3 keynotes, but it contained a fair amount of useful information. Some of the things discussed are future-oriented, but some will arrive soon. So let's get right into it.
Price and Upgrade Options
Microsoft has not announced an official price for Windows 10, if the intent is to install it on a new PC. If you are attempting to upgrade a machine that currently runs Windows 7 or Windows 8.1, then that will be a free upgrade if done within the first year. Windows Phone 8.1 users are also eligible for a no-cost upgrade to Windows 10 if done in the first year.
Quote Terry Myerson of Microsoft, “Once a device is upgraded to Windows 10, we will be keeping it current for the supported lifetime of the device.” This is not elaborated on, but it seems like a weird statement given what we have traditionally expected from Windows. One possible explanation is that Microsoft intends for Windows to be a subscription service going forward, which would be the most obvious extension of “Windows as a Service”. On the other hand, they could be going for the per-device revenue option with Bing, Windows Store, and other initiatives being long tail. If so, I am a bit confused about what constitutes a new device for systems that are regularly upgraded, like what our readers are typically interested in. All of that will eventually be made clear, but not yet.
A New Build for Windows 10
Late in the keynote, Microsoft announced the availability of new preview builds for Windows 10. This time, users of Windows Phone 8.1 will also be able to see the work in progress. PC “Insiders” will get access to their build “in the next week” and phones will get access “in Feburary”. Ars Technica seems to believe that this is scheduled for Sunday, February 1st, which is a really weird time to release a build but their source might be right.
We don't know exactly what will be in it, though. In my predictions, I guessed that a DirectX 12 SDK might be available (or at least some demos) in the next build. That has not been mentioned, which probably would have been if it were true. I expect the next possibility (if we're not surprised in the next one-to-ten days when the build drops) is Game Developers Conference (GDC 2015), which starts on March 2nd.
The New Web Browser: Project Spartan
My guess was that Spartan would be based on DirectX 12. Joe Belfiore said that it is using a new, standards-compliant rendering engine and basically nothing more. The event focused on specific features. The first is note taking, which basically turns the web browser into a telestrator that can also accept keyboard comment blocks. The second is a reading mode that alters content into a Microsoft Word-like column. The third is “reading lists”, which is basically a “read it later” feature that does offline caching. The fourth is Adobe PDF support, which works with the other features of Spartan such as note taking and reading lists.
Which Transitions Into Cortana
The fifth feature of Spartan is Cortana integration, which will provide auto-suggestions based on the information that the assistant software has. The example they provided was auto-suggesting the website for his wife's flight. Surprisingly, when you attempt to control a Spartan, Cortana does not say “There's two of us in here now, remember?” You know, in an attempt to let you know she's service that's integrated into the browser.
Otherwise, it's an interesting demo. I might even end up using it when it comes out, but these sorts of things do not really interest me too much. We have been at the point where, for my usage, the operating system is really not in the way anymore. It feels like there is very little friction between me and getting what I want done, done. Of course, people felt that way about rotary phones until touch-tone came out, and I keep an open mind to better methods. It's just hard to get me excited about voice-activated digital assistants.
As I stated before, DirectX 12 was mentioned but a release date was not confirmed. What they did mention was a bit of relative performance. DirectX 12 supposedly uses about half of the power consumption of DirectX 11, which is particularly great for mobile applications. It can also handle scenes with many more objects. A FutureMark demo was displayed, with the DirectX 11 version alongside a DirectX 12 version. The models seem fairly simple, but the DirectX 12 version appears to running at over 100 FPS when the DirectX 11 version outright fails.
Other gaming features were mentioned. First, Windows 10 will allow shadow recording the last 30 seconds of footage from any game. You might think that NVIDIA would be upset about that, and they might be, but that is significantly less time than ShadowPlay or other recording methods. Second, Xbox One will be able to stream gameplay to any PC in your house. I expect this is the opposite direction than what people hope for, rather wishing for high-quality PC footage to be easily streamed to TVs with a simple interface. It will probably serve a purpose for some use case, though.
Well that was a pretty long event, clocking in at almost two-and-a-half hours. The end had a surprise announcement of an augmented reality (not virtual reality) headset, called the “HoloLens”, which is developed by the Kinect team. I am deliberately not elaborating on it because I was not at the event and I have not tried it. I will say that the most interesting part about it, for me, is the Skype integration, because that probably hints at Microsoft's intentions with the product.
For the rest of us, it touched on a number of interesting features but, like the Enterprise event, did not really dive in. It would have been nice to get some technical details about DirectX 12, but that obviously does not cater to the intended audience. Unless an upcoming build soft-launches a DirectX 12 preview (or Spartan) so that we can do our own discovery, we will probably need to wait until GDC and/or BUILD to find out more.
Until then, you could watch the on-demand version at Microsoft's website.