Samsung 950 PRO 256GB and 512GB M.2 NVMe PCIe SSD Review
Sequential Performance - HDTach, HDTune, File Copy, YAPT (sequential)
We have shifted over to combining our results into two groupings for consumer reviews. First up is sequential performance:
HD Tach will test the sequential read, random access and interface burst speeds of your attached storage device (hard drive, flash drive, removable drive, etc). All drive technologies such as SCSI, IDE/ATA, 1394, USB, SATA and RAID are supported. HDTach tests sequential performance by issuing reads in a manner that was optimized more for HDD access, but this unique method has proven useful in evaluating the sequential response time of SSDs. The accesses are relatively small in size (2k), and are issued with a single working thread (QD=1). The end result is that devices with relatively IO high latency will not reach their ultimate rated speed.
So we've included a nice spread of PCIe and SATA SSDs here, as this is a consumer review. The 950 PROs are both similar in performance with the NVMe SM951. The smaller capacity 950 PRO comes in matching the 1.2TB Intel SSD 750. The rest of the field is essentially trounced by these powerhouses when it comes to sequentials (even QD=1 small sequentials in this case). Thank goodness for NVMe!
HDTune tests a similar level of features as compared with HDTach, but with a different access pattern. Thus provides us with an additional set of benchmark numbers to compare between storage configurations. CPU utilization has proven negligible with modern processing horsepower, and is no longer included. Additionally, we do not include write performance due to HDTune's write access pattern not playing nicely with most SSDs we have tested it on.
The 950 PROs clean house in HDTune. No questions asked. It appears some tuning has been done since the SM951.
PCPer File Copy Test
Our custom PCPer-FC test does some fairly simple file creation and copy routines in order to test the storage system for speed. The script creates a set of files of varying sizes, times the creation process, then copies the same files to another partition on the same hard drive and times the copy process. There are four file sizes that we used to try and find any strong or weak points in the hardware: 10 files @ 1000 MB each, 100 files @ 100 MB each, 500 files @ 10 MB each and 1000 files at 1 MB each.
File creations and copies are dominated by the 950 PROs, with the smaller capacity model again coming in similar to the Intel SSD 750.
YAPT (yet another performance test) is a benchmark recommended by a pair of drive manufacturers and was incredibly difficult to locate as it hasn't been updated or used in quite some time. That doesn't make it irrelevant by any means though, as the benchmark is quite useful. It creates a test file of about 100 MB in size and runs both random and sequential read and write tests with it while changing the data I/O size in the process. The misaligned nature of this test exposes the read-modify-write performance of SSDs and Advanced Format HDDs.
The spread in YAPT is consistent with expected results. I'm shocked this old DOS app can keep up with such fast SSDs!