Introduction

Iwill KK266 KT133A Motherboard Review

This content was originally featured on Amdmb.com and has been converted to PC Perspective’s website. Some color changes and flaws may appear.

Iwill’s products have been around for a good while, even if you haven’t heard of them. They were the originators of the onboard SCSI and onboard IDE RAID solutions, for both AMD and Intel solutions. In fact, an interesting note is that Iwill offers an IDE RAID and non-RAID solution for every motherboard they manufacturer.

Iwill KK266 KT133A Motherboard Review - Motherboards 23
Click to Enlarge

When Iwill contacted me about sending me a motherboard to review, I was bit skeptical due to fact that their products are a bit lower key than the big boys like Asus and Abit. I think with the release of the KT133A chipset motherboard, the KK266, is going to change all of that. Perhaps a bit too optimistic? Judge for yourself after reading the full review.

Let’s start with some stats:

Motherboard Specifications
CPU Socket Socket A (133/266 DDR MHz Support)
Chipset VIA KT133A
Form Factor ATX
Multiplier Options Up to 12.5x
Bus Speed Options 100 – 166 MHz in 1 MHz intervals
Voltages 1.5 – 1.85v in 0.025v increments
Memory Support 3 x 168-pin SDRAM PC100/PC133 Support
Expansion Slots 6/1/0/1 (PCI/ISA/AMR/AGP)
AGP Support 4x AGP
USB Support 2 Standard USB ports
Expansion for additional 2 ports
Bios Award Bios Flash ROM
Onboard IDE 2 x ATA100 EIDE
« PreviousNext »