Review Index:

Intel Core i7-990X Gulftown Processor and DX58SO2 Motherboard Review

Author: Ryan Shrout
Manufacturer: Intel

The Intel DX58SO2 Motherboard

Whether you are pairing it with a Core i7-990X or one of the lower cost Nehalem Core i7-950 processors, Intel has built a motherboard that impresses with the feature set and performance options available to consumers. I know many of you don’t immediately think of Intel-branded motherboards when it comes time to select the backbone of your PC, but the DX58SO2 should make you second guess yourself.

View Full Size

Intel’s Extreme Series motherboards continue to follow a blue-on-black color scheme that gives the appearance of being high-end end without the flash of a lot of third party boards. The Skull logo that started with Intel’s Skulltrail platform continues on and give the board “edge” I guess if such a thing sounds reasonable… The board offers a layout that will appeal to gamers and enthusiasts alike and a feature set that rivals just about any other option on the market.

View Full Size

The slot configuration consists of a three full length PCIe x16 slots for multi-GPU gaming and yes, the DX50SO2 does have support for both CrossFire and SLI technology. There are a pair x1 PCIe slots for further expansion and one remaining legacy PCI slot.

View Full Size

At the bottom of the board the most obvious feature is the +/- and Power/Reset buttons. While the latter two have pretty obvious usage, the plus and minus keys are used for adjusting the clock rate of the processor via the bus speed, 1 MHz at a time. We have seen this option on other boards but getting that same overclocking encouragement from Intel directly is a nice change of pace.
Also, all the way on the left, you will see a set of LEDs for Mass Storage Init, USB Init, etc that helps with boot troubleshooting.

View Full Size

Moving to the right we see (in addition the Firewire header seen on the previous photo) three USB 2.0 headers for additional ports and case connectors, the internal speaker, LED code display for POST issues and the front panel connections.

View Full Size

The SATA configuration includes six of your standard SATA 3.0 Gb/s ports courtesy of the ICH10 south bridge but remember that this product was released well before the SATA 6G implementation we see today. As such, the DX58SO2 motherboard offers a pair of SATA 6G ports (in blue) via the Marvel 9128 controller.

View Full Size

As we mentioned before, one of the defining features of the Nehalem processors is the use a three-channel memory controller and thus the motherboard sports 6 total memory slots for DDR3 modules. Getting the maximum performance out of your system then requires the use of at least three DIMMs so be sure you are looking for a triple-channel kit rather than the many dual-channel kits that exist for all other platforms.

View Full Size

The LGA1366 processor socket is surrounded by a heatpipe cooling solution that covers the X58 north bridge and the power / VRM components.

View Full Size

Here you can see two more key controllers, the Marvel 9121 used for the eSATA ports on the back panel and the (slightly hidden) NEC controller for the USB 3.0 support integrated as well.

View Full Size

Along the back of the motherboard you will find the connectivity options that are offered. We already mentioned the eSATA and USB 3.0 support which are great to see Intel’s board team integrate. Between them rests a CMOS reset switch used for recovering the system if something should happen during BIOS tweaking. Other than that you see six more USB 2.0 ports, dual Gigabit Ethernet, a Firewire connection and 8-channel audio support in both analog and digital formats.

View Full Size

Included in the box is a whole host of accessories including cool looking translucent-blue SATA cables and SLI connections that match the board color scheme perfectly. A mouse pad, detail and quick-use instructions are also here as is a sheet of stickers. You know, for your Trapper Keeper.

View Full Size

One really cool addition in the box is this little guy – a combination Bluetooth / WiFi antennae that connects back on the board and adds support for both technologies automagically. Simply connect the cable to a free USB 2.0 header on the board and your devices will be detected with drivers available on the included DVD.

View Full Size

Just to make it a nice touch, the antennae itself has double sided tape on it so that you can install it in your case, preferably on the BACK of an unused 5.25-in back panel. This is a pretty cool addition to the board that we haven’t seen on other motherboards in quite some time.

May 19, 2011 | 12:24 PM - Posted by Anthony (not verified)

You guys are still using handbrake 0.9.2 to test? Do you have any idea how many SSE optimizations have gone into x264 (the main component of HB) since then? There are even a few AVX instructions in the newest x264. Some encoding work functions have increased in speed by as much as 50% for Nehalem and more recent processors. Please consider updating your test platform.

May 19, 2011 | 01:12 PM - Posted by Anonymous (not verified)

Use your head Anthony, fact is I am sure most of these benches were done when 9.2 was the current version of handbrake. I would hate to see half of these benches done on 9.2 and half on 9.5. Those results would be rather inaccurate.
I am sure that at a point PCPER will update the version and re evaluate the processors accordingly.

May 20, 2011 | 09:17 PM - Posted by Anthony (not verified)

Yeah last I checked, other sites do that on an annual basis. Anand does it every year for his storage bench. Do you know how old 0.9.2 is? Try February 2008, over three years ago. Time to give up the ghost and rebenchmark a set of CPUs on 0.9.5 with the new defaults for HB to give users an idea of what the difference is today in terms of performance, not with ancient code from 3 years ago.

May 26, 2011 | 04:12 PM - Posted by Alex Botts (not verified)

I have a system with an Intel DX58SO2 mother board.

Once I'm in the BIOS setup menu, how can I change the
"Boot Drive Priority"?

May 27, 2011 | 10:56 AM - Posted by Jeremy Hellstrom

It looks like you use F10 during boot to bring up the boot menu, not having seen it I can't say for sure, but that menu is probably a bit more complex than just choosing a temporary boot device.

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd> <blockquote><p><br>
  • Web page addresses and e-mail addresses turn into links automatically.

More information about formatting options

By submitting this form, you accept the Mollom privacy policy.