Introduction and Technical Specifications

Primochill’s Wet Bench acrylic-based test bench makes for an innovative bench that functions as well as it looks…

Introduction

Courtesy of Primochill

The Wet Bench open-air test bench is Primochill's premier case offering. This acrylic-based enclosure features an innovative design allowing for easy access to the motherboard and PCIe cards without the hassle of removing case panels and mounting screws associated with a typical case motherboard change out. With a starting MSRP of $139.95, the Wet Bench is priced competitively in light of the configurability and features offered with the case.

Courtesy of Primochill

Courtesy of Primochill

The Wet Bench is unique in its design – Primochill built it to support custom water cooling solutions from the ground up. The base kit supports mounting the water cooling kit's radiator to the back plate, up to a 360mm size (supporting 3x120mm fans). Primochill also offers an optional backplate with support for up to a 480mm radiator (supporting up to 4x120mm fans).

Courtesy of Primochill

Primochill designed the Wet Bench to electrically isolate all components from one another, to minimize the risk of shorting out the motherboard seated in the top plate of the test bench. With the exception of the motherboard mount screws, all screws and nuts are plastic based. The metal motherboard mounts have plastic heads on them. This design helps to electrically isolate the mounted components as well as minimizing scarring to the Wet Bench's acrylic surface.

Technical Specifications (taken from the Primochill website)

Industry Firsts 1st screw-less all acrylic water cooling test bench
1st test bench with re-positional wire and water pass-thru covers
1st all acrylic test bench to natively support 3x120mm or 3x140mm radiators
1st test bench to have top removable MB tray for interchanging other benches
1st test bench to have screw-less GPU support system
1st test bench to offer over 30+ color combinations
1st test bench made by PrimoChill
Included Parts HDD/SSD/Optical thumbscrews for mount drives to bench
Motherboard Quick Mount Hardware Kit
6x MB Tray covers and hardware to install
1x Drive Rack for vertical mounting 1/8 Inch Acrylic
2x Vandal Resistant Push Button Power/Reset Switches with harness
1x Universal Rad Mount for 3×120 and 3x140mm (15mm/16mm screw spacing)
1x Screw-less GPU Mount Grip
Product Construction Uprights and cross tray laser cut from 3/8 Inch cast acrylic
Motherboard tray laser cut from 1/4 Inch cast acrylic
Universal radiator support laser cut from 1/4 Inch cast acrylic
Accessory covers laser cut from 1/4 Inch cast acrylic
Product Dimensions 12 Inches (30.48cm) – Tall
13.5 Inches (34.29cm) – Depth (front to back)
19.825 Inches (50.3555cm) – Wide

 

« PreviousNext »