All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Sorry about that, you are going to have to post your smartphone usage stats to Facebook manually now
Subject: General Tech | February 22, 2019 - 01:01 PM | Jeremy Hellstrom
Tagged: facebook, Onavo Protect, vpn, apple, Android, dirty pool
You may remember news back in the summer of 2018 about Facebook's Onavo Protect VPN, when it was pulled from the Apple store due to the fact it collected an impressive array of information and sent it home to Ryan's clone. It had been available since 2013 and it took five years of this behaviour before Apple finally pulled it. If you were still desperate to overshare your phone habits with Facebook then Google was happy to help you out, until today that is. While the VPN is still available on the Play Store, Ars Technica has been assured it no longer collects usage data to send back to Facebook; though one should probably go cold turkey just in case.
There are a number of Facebook employees that suggest these moves from Facebook are not indicative of a change of heart from the company, merely a move to try to save ...
"Facebook "will immediately cease pulling in data from [Onavo] users for market research though it will continue operating as a Virtual Private Network in the short term to allow users to find a replacement," TechCrunch reported yesterday."
Here is some more Tech News from around the web:
- Intel expects Apple to shift to ARM-based Mac chips in 2020 @ The Inquirer
- What is Intel’s graphic “Odyssey”? @ The Tech Report
- DRAM, it feels good to be a gangsta: Only Intel flash revenues on the rise after brutal quarter @ The Register
- A Third of All Chrome Extensions Request Access To User Data on Any Site @ Slashdot
- Linux love hits Windows 10 19H1 amid a second round of zombie slaying @ The Register
- HTC unveils the Vive Focus Plus aimed at businesses @ The Inquirer
- Here's why your next network switch, storage box, or 5G gateway may do more Arm than good: E1, N1 data-center CPU cores aim at future kit @ The Register
Subject: General Tech | February 21, 2019 - 09:12 PM | Jim Tanous
PC Perspective Podcast #533 - 2/20/2019
This week we review a new Synology NAS, a capable-but-pricey CPU water block, discuss launch date rumors for Ryzen 3000 and Navi, take a look at NVIDIA's Q4 financial results, and more!
Subscribe to the PC Perspective Podcast
Check out previous podcast episodes: http://pcper.com/podcast
00:01:43 - Review: Synology DS1019+ NAS
00:12:05 - Review: Aquacomputer Cuplex Kryos Water Block
00:23:46 - News: Rumored Launch Dates for Ryzen 3000 & Navi
00:33:59 - News: Intel Pentium Gold G5620
00:39:20 - News: RTX BIOS Flashing
00:42:45 - News: Return of the Logitech MX518 Gaming Mouse
00:48:56 - News: NVIDIA Q4 Financial Results
01:11:41 - News: Samsung Galaxy Fold
01:13:22 - News: Undisclosed Microphones in Nest Secure
01:19:12 - Picks of the Week
01:30:55 - Outro
Subject: Graphics Cards | February 21, 2019 - 07:36 PM | Jeremy Hellstrom
Tagged: msi, RX Vega 56 Air Boost 8G OC, RX Vega 56, amd
The news is a bit late as NewEgg is currently out of stock, but it is worth keeping your eyes peeled for the Vega 56; a mid-range card at a mid-range price is somewhat rare at the moment.
MSI are selling their Vega 56 Air Boost 8G OC card for $279 USD, though keep away from the Canadian site as the price drop has yet to spread northwards. While not availble at the time of this posting you should pay attention as not only is the card likely to come back in the not too distant future but this may prompt a drop in price for other cards.
This particular model sports a Core Clock of 1181 MHz which can hit 1520 MHz on Boost and the 8GB of HBM2 runs at 1600 MHz on a 2048-bit interface giving it an impressive amount of bandwidth. It is admittedly not a new card, you can see how it was received when it initially launched right here.
Subject: Graphics Cards, Systems | February 21, 2019 - 03:04 PM | Scott Michaud
Tagged: pascal, nvidia, mx250, mx230, mx, gp108, geforce mx
Two new laptop GPUs launched in NVIDIA’s low-end MX line. This classification of products is designed to slide above the GPUs found on typical laptop CPUs by a wide enough margin to justify an extra chip, but not enough to be endorsed as part of their gaming line.
As such, pretty much the only performance number that NVIDIA provides is an “up-to” factor relative to Intel’s HD620 iGPU as seen on the Core i5-8265U. For reference, the iGPU on this specific CPU has 192 shader units running at up to 1.1 GHz. Technically there exists some variants that have boost clocks up to 1.15 GHz but that extra 4.5% shouldn’t matter too much for this comparison.
Versus this part, the MX250 is rated as up to 3.5x faster; the MX230 is rated at up to 2.6x faster.
One thing that I should note is that the last generation’s MX150 is listed as up to 4x the Intel UHD 620, although they don’t state which specific CPU’s UHD 620.
This leads to a few possibilities:
- The MX250 has a minor performance regression versus the MX150 in the “up to” test(s)
- The UHD 620 had significant driver optimizations in at least the “up to” test(s)
- The UHD 620 that they tested back then is significantly slower than the i5-8265U
- They rounded differently then vs now
- They couldn’t include the previous “up to” test for some reason
Unfortunately, because NVIDIA is not releasing any specifics, we can only list possibilities and maybe speculate if one seems exceedingly likely. (To me, none of the first four stands out head-and-shoulders above the other three.)
Like the MX150 that came before it, both the MX230 and MX250 will use GDDR5 memory. The MX130 could be paired with either GDDR5 or DDR3.
Anandtech speculates that it is based on the GP108, which is a safe assumption. NVIDIA confirmed that the new parts are using the Pascal architecture, and the GP108 is the Pascal chip in that performance range. Anandtech also claims that the MX230 and MX250 are fabricated under Samsung 14nm, while the “typical” MX150 is TSMC 16nm. The Wikipedia list of NVIDIA graphics, however, claims that the MX150 is fabricated at 14nm. While both could be right, a die shrink would make a bit of sense to squeeze out a few more chips from a wafer (if yields are relatively equal). If that’s the case, and they changed manufacturers, then there might be a slight revision change to the GP108; these changes happen frequently, and their effects should be invisible to the end user… but sometimes they make a difference.
It’ll be interesting to see benchmarks when they hit the market.
Subject: Cases and Cooling | February 21, 2019 - 11:36 AM | Tim Verry
Tagged: tr4, tower cooler, Threadripper, passive cooling, arctic cooling, arctic, amd, air cooling
Arctic (ARCTIC) is reportedly working on a new air cooler for the AMD Threadripper / TR4 platform according to AnandTech who spotted a prototype on display during a gaming convention in Germany. The currently named "Freezer 50 TR" is a massive dual tower air cooler wrapped in a black shroud (with integrated addressable RGB lighting) and outfitted with two 140mm fans.
AnandTech spotted Arctic's prototype 0dB Freezer 50 TR air cooler.
Arctic claims that the Freezer 50 TR is a semi-passive cooler that hits 0dB under light loads as the dual fans stop spinning when the PWM signal gets below 5%. The company has not released the maximum noise levels or fan speeds though. Further, the company is not yet talking TDPs as the cooler is still a prototype, but with the massive air cooler having two large aluminum fin stacks and eight direct contact nickel-plated heat-pipes it should handle Threadripper without issue (though what noise levels will have to be is still a concern).
Looking on Arctic's website, the new Freezer 50 TR looks to fill in a large gap in their TR4 cooler lineup between the $48 Freezer 33 TR single tower cooler (up to 200W) and the $75 Liquid Freezer 120 all-in-one liquid cooler with 120mm radiator (250W). From there, Arctic offers a $85 240mm and a $120 360mm cooler. For enthusiasts wanting air cooling with more stable temperatures under load and maybe a bit of overclocking room, the Freezer 50 TR may be the option they are looking for. I would guess that the Freezer 50 TR will likely be priced somewhere around or just above the 120mm liquid cooler.
I agree with Mr. Shilov (AnandTech) that a Computex launch is likely for the new cooler which would place it just in time for AMD's new Zen 2-based chips which may include an announcement of or at least information on new Threadripper 3 parts (though actual shipping chips may not be until the fall) if the rumors hold true. Threadripper and Threadripper 2 should be supported, but whether it will be enough to cool Threadripper 3 processors which may well ratchet up the core count again (if 64-core 7nm EPYC parts are any indication) is still unknown.
In any event, more air cooler options for Threadripper is a great thing as there are not nearly as many options for TR4 as there are for Ryzen and other consumer-level AMD (AM4) and Intel (115x) sockets! Water cooling may well be your best bet with Threadripper and other HEDT parts, especially when overclocking, but I am interested to see how well the Freezer 50 TR does in reviews!
- Computex 2018: AMD and Cooler Master Unveil Wraith Ripper Air Cooler For Threadripper Processors
- The one, the only, Cooler Master's MASTERAIR MA621P air cooler for Threadripper
- The AMD Ryzen Threadripper 2920X and 2970WX Review
Subject: General Tech | February 20, 2019 - 09:07 PM | Tim Verry
Tagged: quarterly earnings, nvidia, financial results
On Valentine's Day NVIDIA released its yearly and quarterly financial results for fiscal year 2019. While yearly revenue was up 21% from last year at 11.72 billion, its quarterly revenue of 2.2 billion fell 31% versus the previous quarter and 24% versus the same quarter last year. On the yearly revenue front, Nvidia credits gaming, data center, professional visualization, and automotive products/divisions for its record revenue in FY2019.
Nvidia launched its RTX 2060 graphics card in Q4.
Q4 of FY2019 ended Jan 27th and saw operating expenses increase 6% versus last quarter and 25% YoY. while operating income fell 72% QoQ and 73% YoY. Net Income of $567 million fell 54% versus the third quarter and 49% versus Q4'FY18. Earnings per diluted share also fell to 92 cents. In Q4 Nvidia completed $700 million in share repurchases.
|Q4 FY19||Q3 FY19||Q4 FY18||Q/Q||Y/Y|
|Gross Margin||54.7%||60.4%||61.9%||(570 bps)||(720 bps)|
|Operating Expenses||$913||$863||$728||+ 6%||+ 25%|
|Diluted Earnings Per Share||$0.92||$1.97||$1.78||(53%)||(48%)|
In FY2019 Nvidia reportedly returned $1.95 billion to shareholders through $371 million in cash dividend payments and $1.58B in share repurchases. Looking at FY2020 the graphics giant plans to return $2.3 billion to shareholders through a combination of dividends and share buybacks.
Nvidia CEO Jensen Huang was quoted in the press release in stating
“This was a turbulent close to what had been a great year. The combination of post-crypto excess channel inventory and recent deteriorating end-market conditions drove a disappointing quarter.
“Despite this setback, NVIDIA’s fundamental position and the markets we serve are strong. The accelerated computing platform we pioneered is central to some of world’s most important and fastest growing industries – from artificial intelligence to autonomous vehicles to robotics. We fully expect to return to sustained growth,”
Looking into next year, Nvidia expects Q1 FY2020 revenue to hit $2.2 billion (+/- 2%) and for yearly revenue to stay flat or decrease slightly. First quarter gross margins and operating expenses are expected to increase to 58.8% and $930 million respectively (those are GAAP numbers).
Nvidia has had a rough last quarter and both graphics chip makers AMD and Nvidia have experienced yet another cryptocurrency mining craze and crash in 2018 except this time around the companies had jumped more into it than before with mining specific graphics card lines and all. Nvidia's stock price (currently at $158.55) has fallen quite a bit since October but is still above where it was just a few years ago. Nvidia has a wide range of products and diversified interests where I am not worried about their future, but I don't know enough to say with confidence which way things will go in FY2020 and if their outlook predictions will hold true. The company launched its RTX 2060 last quarter and is expected to bring budget and mid-range cards sans ray tracing support (e.g. the rumored GTX 1660 Ti) this quarter along with the professional market products ramping up with data center and professional workstation graphics cards and projects like NVIDIA DRIVE and the Mercedes Benz partnership – and that's only a couple slices of what the company is involved in – so it will be interesting to see how FY2020 shakes out for them in general as well as for enthusiasts.
You can dig into the nitty-gritty numbers over at investor.nvidia.com if you are curious.
Subject: Cases and Cooling | February 20, 2019 - 03:57 PM | Jeremy Hellstrom
Tagged: Alphacool, GPX Eisblock, rtx, nvidia, watercooling
When testing the new watercooler from Alphacool, designed for RTX cards, [H]ard|OCP made an interesting discovery, VRAM height is somewhat variable. As part of their review process they always check how well the waterblock mates with what it is cooling, and as you can see below there is something a bit off with their test sample.
As it turns out, VRAM height can vary by up to 0.3mm, which may not sound like a lot but is enough to cause mating problems unless you spread thermal paste on like peanut butter ... which is not that good an idea. The good news is that you can purchase thermal pads in varying thicknesses which you can make use of to ensure a proper mate. You can check out their initial look now, or wait until said pads arrive and the full review is published.
"Alphacool has always made a great showing when it comes to water cooling our hot video cards. The company has recently updated its Eisblock series of GPU water blocks to include models made for NVIDIA's RTX series of cards featuring the Turing GPUs. We show you these new blocks and tell you about our first experiences with those."
Here are some more Cases & Cooling reviews from around the web:
- Deepcool Gammaxxx L240 AIO @ Guru of 3D
- SilentiumPC Spartan 3 Pro RGB @ TechPowerUp
- Deepcool Gamerstorm FRYZEN CPU Cooler @ Kitguru
- Noctua NF-P12 redux-1700 PWM Fan @ TechPowerUp
- Thermaltake View 71 TG RGB Full Tower Review @ NikKTech
- Fractal Design Meshify S2 @ Kitguru
Subject: General Tech | February 20, 2019 - 02:09 PM | Jeremy Hellstrom
Tagged: Metro Exodus, games
If you have yet to venture into the new post apocalyptic Russian wasteland, you might want to hold off until you can get your GPU some reinforcements. An RTX 2060 will let you crank up the settings at 1080p and average around 50fps, while a Vega 64 will almost hit 60fps though without the fancy ray tracing. If 1440p is your target you are going to want an RTX 2080 if you are going to turn on all the features and still hit 60fps, AMD's offerings can handle this resolution though you many need to turn down some features. If 4K is your preference, even the mighty RTX 2080 Ti can only manage about 40fps with ray tracing enabled.
Rock, Paper, SHOTGUN is still shopping for a few more cards to add to their suite and an updated machine but they break out their recommendations by GPU which is handy if you have that card.
"Once upon a time, there was an old saying in PC gaming spheres: ‘But will it run Crysis?’ Then the apocalypse happened, and civilisation retreated to the dark tunnels of its underground tube system, the phrase becoming lost and morphed in the intervening years. Now we say in hushed, hallowed tones, ‘But will it run Metro?’"
Here is some more Tech News from around the web:
- Microsoft, Paradox allow open game modding on Xbox One for the first time @ Ars Technica
- Apex Legends Armor and Gear guide - Body Shields, Helmets, Knockdown Shields, Backpacks @ Rock, Paper, SHOTGUN
- Anthem review: BioWare’s sky-high gaming ambition crashes back to Earth @ Ars Technica
- Wot I Think - Civilization VI: Gathering Storm @ Rock, Paper, SHOTGUN
- Nvidia answers questions about DLSS functionality and quality @ HEXUS
- Humble Great Gamemaker Games Bundle
- TWot I Think: Far Cry New Dawn @ Rock, Paper, SHOTGUN
- Gamers Love Call of Duty 15's New Loot Boxes @ [H]ard|OCP
- Far Cry New Dawn PC graphics performance: How to get the best settings @ Rock, Paper, SHOTGUN
Subject: General Tech | February 20, 2019 - 12:34 PM | Jeremy Hellstrom
Tagged: nest, google, alphabet, iot
You may recall a news story last summer, about USB fans which were handed out to journalists that showed how oblivious many people are when it comes to security. The recent news about the microphone in Google's Nest Secure shows that the lesson still has not been learned, though there is certainly an extra level to this particular story. Google recently announced that they would be activating the microphone embedded in the Nest Secure, something which they completely neglected to document that their home security system contained.
The Nest Secure consists of several sensors to detect a window or door opening, as well as a base with a speaker to sound alerts and a keypad to verify the user. You would not reasonably expect such a thing to contain a microphone, let alone an undocumented one. Google insists that they simply forgot to include it in the parts list and that this is all just an innocent misunderstanding. They are also asking you to believe that the microphone has never been enabled and that there is no possible way that it might have been secretly recording conversations.
As a point in Google's favour Ars Technica does point out that every other product Google sells has a microphone in it, and so it would be reasonable to suspect one was present in the Nest. In a world where your TV spies on you, an update can brick your shoes and you can buy smart locks that will ensure you will never be able to go home again, just to mention a few, having your security system spying on you does not seem too far fetched.
“The on-device microphone was never intended to be a secret and should have been listed in the tech specs. That was an error on our part.” According to the company, "the microphone has never been on and is only activated when users specifically enable the option.”
Here is some more Tech News from around the web:
- Password managers are storing plain-text master passwords in PC memory @ The Inquirer
- LG folds at prospect of launching bendy phone while Samsung flaunts its upcoming kit on telly @ The Register
- Qualcomm's Snapdragon X55 Modem Is the 4G/5G Solution We've Been Waiting For @ Slashdot
- ReRAM biz Crossbar hopes fav-du-jour IoT AI can help it avoid the tracks of Intel's Optane storage chip juggernaut @ The Register
- Valve is killing off Steam's video section because nobody really used it @ The Inquirer
- The death of Windows Phone and the five stages of mobile grief @ The Tech Report
Subject: Processors | February 20, 2019 - 09:59 AM | Sebastian Peak
Tagged: rumor, report, processor, pentium, Intel, G5620, G5600T, G5420T, G5420, G4950, G4930T, G4930, cpu, celeron
The Pentium processor has been around since the end of the 486 era, introduced in 1993 at a startling cost of $878 for the 60 MHz version, and $964 for 66 MHz (when purchased in quantities of 1000, that is). Now Intel is taking Pentium into uncharted waters for 2019, with the Pentium Gold G5620 reaching 4.0 GHz for the first time for a processor bearing the iconic brand.
Image via Tom's Hardware
According to reports from Tom's Hardware and AnandTech the Pentium G5620, listed early by retailers in Europe, is a 2-core / 4-thread part that will apparently be at the top of the new budget desktop CPU lineup. Alongside the Pentium G5620 there will refreshed Pentium and Celeron CPUs, as listed by Tom's Hardware:
"...the other processors listed include the G5420 (3.8 GHz, 2/4), G5600T (3.3 GHz, 2/4), G5420T (3.2 GHz, 2/4), the Celeron G4950 (3.3 GHz, 2/2), the Celeron G4930 (3.2 GHz, 2/2), and the Celeron G4930T (3.0 GHz, 2/2)."
We do not have an Intel announcement yet of course, so no details about architecture, process tech, or official pricing. March or April is the expected timeframe based on the listings, and with no official release dates we can only speculate on actual availability here in the U.S.
Subject: Graphics Cards | February 19, 2019 - 06:21 PM | Jeremy Hellstrom
Tagged: danger, rtx, bios, flash, nvidia, risky business
So you like living dangerously and are willing to bet $1000 or more on something that might make your new NVIDIA GPU a bit faster, or transform it into a brick? Then does Overclockers Club have a scoop for you! There exists a tool called NVFlash, with or without added ID Mismatch Modified, which will allow you to change the BIOS of your card to another manufacturers design which can increase your cards power envelope and offer better performance ...
or kill it dead ...
or introduce artifacting, random crashes or all sort of other mischief.
On the other hand, if all goes well you can turn your plain old RTX card into an overclocked model of the same type and see higher performance overall. Take a look at OCC's article and read it fully before deciding if this is a risk you might be willing to take.
"WARNING! Flash the BIOS at your own risk. Flashing a video card BIOS to a different model and/or series WILL void your warranty. This process can also cause other permanent issues like video artifacts and premature hardware failure!"
Here are some more Graphics Card articles from around the web:
- MSI RTX 2080 Ti Lightning Z @ Kitguru
- GeForce 418.91 Driver Performance Analysis @ BabelTechReviews
- Battlefield V DLSS Tested: Overpromised, Underdelivered @ Techspot
- Far Cry New Dawn @ Guru of 3D
- Metro Exodus PC Graphics Benchmark @ Techspot
- AMD Radeon VII @ [H]ard|OCP
Subject: General Tech | February 19, 2019 - 03:31 PM | Jeremy Hellstrom
Tagged: tu116, ryzen 3, rumours, nvidia, navi, msi, GTX 1660 TI Gaming X, gtx 1660 ti, amd
If you blinked you would have missed a certain unboxing video, as it was posted before the NDA on the GTX 1660 Ti expired. However, a few sites managed to get some screengrabs before the video was taken down, so we now know a bit more about the card once thought to be mythical.
Image from PC World Bulgaria via [H]ard|OCP
Specifically, it was an MSI GeForce GTX 1660 TI Gaming X that was revealed to the world and while there were no benchmarks, there now seems to be physical proof that this card exists. It sports a single 8pin PCIe power connector, three DisplayPort 1.4 and a single HDMI 2.0b outputs and not a bit of RTX branding. Instead it contains 1,536 Turing Shaders and a 12 nm process "TU116" chip hidden under the Twin Frozr 7 cooler. The outputs tell us this particular card is not compatible with VirtualLink.
For AMD fans, The Inquirer is reporting that 7nm Ryzen 3 desktop CPUs and Navi GPUs should be announced on 7 July at Computex. We should also see the new X570 chipset, though the rumour is that the current generation of motherboards will support the new Ryzen series with a BIOS update. Sadly, Navi is likely to only be announced as it is likely the release will be delayed until October, though like everything else in this post that is purely speculation based on a variety of sources and may not be accurate.
One thing we do know is that the new flagship Ryzen 9 3800X will have two eight core Zen 2 dies, offering a total of 16 cores and 32 threads. The base clock should be 3.9GHz with a top speed of 4.7GHZ, and a TDP of 125W.
Subject: Processors | February 19, 2019 - 02:57 PM | Tim Verry
Tagged: Zen 2, x570, X500, Ryzen 3000, navi, matisse, amd, 7nm
Spotted by HardOCP, Paul from Red Gaming Tech recently shared leaked information from a source with a reputation of being reliable (from past leaks about 7nm GPUs) who claims that AMD will be announcing a plethora of products at Computex in June to setup for the launch of Zen 2-based 7nm "Matisse" Ryzen 3000 desktop processors, X500 series chipset-based motherboards, and 7nm Navi-based consumer gaming graphics cards on July 7th (The 7th for 7nm I guess).
Image via AnandTech
As a refresher, Zen 2 is the next major architectural jump for AMD while also pushing a new smaller process node. AMD has not yet revealed all the details about Zen 2 especially about consumer chips, but the new microarchitecture is said to feature tweaks to the front end that along with clockspeed bumps from the TSMC 7nm process will allow them to realize notable IPC and single threaded performance gains. When talking about EPYC 2 "Rome" server processors (Zen 2 based) AMD hinted at changes to branch prediction and pre-fetching as well as increased cache sizes and larger FPUs (256-bit), for example. The move to 7nm allegedly allows AMD to hit similar power envelopes to Zen+ (12nm) Ryzen 2000 series processors while hitting much higher clockspeeds at up to 5.1 GHz boost on their top-end chip. While mobile chips may strike a finer balance between power usage and performance with the move to 7nm, on the desktop AMD is spending nearly all the power savings on performance (which makes sense). Note that it is still not officially official that AMD is using a scaled down EPYC setup with more than one 7nm (TSMC) CPU die and a separate IO die (14nm Global Foundries), [they only teased a chip at CES with an IO die and a single CPU die] but I am of the opinion that that particular rumor makes more sense than otherwise so am inclined to believe this is the case.
Ryzen 3000 series processors feature an IO chiplet along with what is rumored to be up to two CPU chiplets (image credit: Tom's Hardware).
From previous leaks, Ryzen 3000 is said to cover all the bases from six core Ryzen 3 3300 series chips to midrange eight core Ryzen 5 and on up to 12 and 16 core Ryzen 9 CPUs that move beyond a single CPU die to two 7nm CPU dies that feature eight cores each. In fact, the top end Ryzen 9 3850X is supposedly a 16 core (32 thread) monster of a desktop chip that has a base frequency of 4.3 GHz and can boost up to 5.1 GHz with a 135W TDP (which when overclocked will likely draw dramatically more like we've seen with both AMD and Intel's top end consumer chips) and price tag of around $520 (400 pounds). The Ryzen 7 3700 and 3700X are 12 core (24 thread) models with TDPs of 95W and 105W respectively with the non-x SKU clocked at 3.8 to 4.6 GHz and the 3700X clocked at 4.2 GHz base and 5 GHz boost. The Ryzen 5 3600 and 3600X are the top end single CPU die models (though a 2x single CCX per die chips might be a reality depending on yields) at eight cores and 16 threads. The Ryzen 3 3300 series parts represent the low end which is now interestingly six cores (oh how times have changed!). Perhaps most interesting of the leaked chips are the Ryzen 5 3600G (~$207) and the Ryzen 3 3300G (~$130) though which feature Navi 12 integrated graphics (presumably these processors combine one 7nm CPU die, one 7nm GPU die, and one 14nm IO die) with 15 and 20 CUs respectively.
As for motherboards, in general the new chips will use the AM4 socket and will be compatible with older 300 and 400 series motherboards with a BIOS update though the top end chips may well necessitate a new X570 or other X500 series motherboard with better power delivery especially for enthusiasts planning to attempt stable overclocks.
Unfortunately, on Navi details are still a bit scarce but the new architecture should bring performance enhancements even beyond Radeon VII (Vega on 7nm). Allegedly due to issues with TSMC, Red Gaming Tech's source believes that Navi might be delayed or pushed back beyond the planned mid-summer release date, but we will have to wait and see. As TSMC ramps up its partial EUV enhanced 7nm node it may free up needed production line space of the current 7nm node for AMD (to fight with others over heh) to meet its intended deadline but we will just have to wait and see!
Take these rumors with a grain of salt as usual but it certainly sounds like it is hoing to be an exciting summer for PC hardware! Hopefully more details about Ryzen 3000 and Navi emerge before then though as that's quite a while yet to wait. Of course, Zen 2 APUs are not coming until at least next year and AMD is still not talking Zen 2 Threadripper which may not see release until the fall at the very earliest. I am very interested to see how AMDs chiplet based design fares and how well they are able to scale it across their product stack(s) as well as what Intel's response will be as it presses on with a fine tuned 14nm++ and a less ambitious 10nm node.
- AMD Shows Off Zen 2-Based EPYC "Rome" Server Processor
- Podcast #521 - Zen 2, 7nm Vega, SSD Vulnerabilities, and more!
- Nein, Zeneration 3 is best
Subject: General Tech | February 19, 2019 - 02:26 PM | Jeremy Hellstrom
Tagged: nifty, stretchable, nanotubes
There have been several foldable screens shown off at CES and other shows, though no prototypes have made it into our hands as of yet. For the most part they seem to rely on rigid structures linked by stretchable or foldable materials, which is what makes the research PhysicsWorld is reporting so interesting. Researchers from the University of Houston have developed a semiconductor which is able to retain its performance even when stretched up to 50% from it's original size. The prototype, with integrated electronics and logic circuits, relies on a rubbery semiconductor composite doped with carbon nanotubes which carry the charge from component to component even when the material is deformed or stretched. They also suggest that this manufacturing is relatively inexpensive, which is perhaps the largest hurdle when developing this type of product.
"Their low-cost semiconductor material retained its high charge carrier mobility, even when subjected to 50% stretching. The team’s work could lead to the development of practical new technologies including robotic skins and wearable electronics."
Here is some more Tech News from around the web:
- All the RTX 2000-series Max-Q laptops @ The Tech Report
- Google Chrome 72 hit by a pair of weirdly ironic bugs @ The Inquirer
- Mandatory update coming to Windows 7, 2008 to kill off weak update hashes @ Ars Technica
- Tens of millions more web accounts for sale after more sites hacked, Mac malware spreads via Windows.exe, and more @ The Register
- NAND flash prices likely to stop falling in 2Q19 @ DigiTimes
- Return of the audio format wars and other money-making scams @ The Register
- What did turbonerds do before the internet? 41 years ago, a load of BBS @ The Register
Subject: General Tech | February 19, 2019 - 11:05 AM | Jim Tanous
Tagged: mx518, logitech g, logitech, gaming mouse
Logitech today announced the rebirth of one of its most popular and beloved products, the MX518 Gaming Mouse. First released nearly fourteen years ago, the MX518 received rave reviews from the tech press and users alike for its comfortable shape, well-positioned customizable buttons, and high-precision sensor with on-the-fly DPI toggling. The company has since released dozens of additional gaming mice models, but fans of the MX518 have long been relegated to paying inflated prices for used stock on eBay if they wanted to get their hands on a replacement.
Now, after a not-so-quiet launch in Asia late last year, Logitech is relaunching the MX518 in Western markets. The company cites the ongoing chorus of user requests to "bring back the MX518" as the reason for the device's revival, and Logitech says that this re-released version is crafted from the original designs with the same shape and feel.
"As one of the most-beloved gaming mice ever, MX518 has inspired legions of fans around the world to ask Logitech G to bring it out of retirement. And we heard you. We pulled the original tools from the Vault and meticulously restored them -- right down to the original glossy keyplate. It's the classic, comfortable shape you know and love, now with modern components that perform to today's advanced standards and a new, updated Nightfall color scheme."
But just because the MX518's exterior remains the same doesn't mean that the mouse's internals can't be updated to take advantage of almost fifteen years of technological advancements. Logitech is therefore packing the "very latest, next-generation technologies" into the new MX518, including a HERO 16K sensor and a 32-bit ARM processor that gives the new mouse a 1ms report rate. Like Logitech's other gaming products, users will be able to store button layouts and custom DPI settings to the mouse's onboard memory so it will always perform and operate the way you want even when connected to PCs not running Logitech's Gaming Software.
Check out the full list of specifications below and head over to Logitech's Gaming site to pre-order the MX518 for $59.99. Shipping date has yet to be announced but considering that the product is already on the market in China, it shouldn't be too long a wait for longtime Logitech fans on this side of the globe to get their fix.
- Height: 131 mm
- Width: 73 mm
- Depth: 43 mm
- Weight: 101 g mouse only
- Cable length: ~ 2.10 m
- Sensor: HERO™ 16K
- Resolution: 100 – 16,000 DPI
- Zero smoothing/acceleration/filtering
- Max. acceleration: > 40 G
- Max. speed: > 400 IPS
- USB data format: 16 bits/axis
- USB report rate: 1000 Hz (1ms)
- Microprocessor: 32-bit ARM
- PTFE Feet: > 250 kilometers
- Onboard memory: 5 profiles
- Lightweight, flexible cable
- Windows® 7 or later
- macOS® 10.11 or later
- USB port
- Internet access for Logitech Gaming Software (optional)
- 2 - Year Warranty
Subject: Cases and Cooling | February 19, 2019 - 10:02 AM | Sebastian Peak
Tagged: special edition, overwatch, nzxt, H500 Overwatch Edition, H500, gaming, enclosure, chassis, case
NZXT is announcing today that they have teamed up with Blizzard Entertainment for "the First Overwatch-themed PC chassis" with the new Overwatch Edition of their H500 mid-tower enclosure.
"The new, special edition H500 Overwatch Edition midtower showcases NZXT’s signature design with a sleek look that any hero would be proud to have in their arsenal. Featuring an all-steel construction in black, a cable management system for streamlined building, and a luminous Overwatch logo on the front panel, this special H500 chassis is perfect for the Overwatch player looking to outfit their rig for battle."
The Overwatch logo on the front panel is illuminated
NZXT lists these features for the H500 Overwatch Edition mid-tower case:
- Features the iconic Black, White, and Orange colors of Overwatch
- A luminous Overwatch logo brightly displayed on the front panel
- Modern design and builder-friendly features
- Premium, all-steel construction with the sleek H Series aesthetic
- Tempered glass side panel showcases your build
- Wire management is made easy with an intuitive, patent-pending cable management system
- Water-cooling installation is simplified using a removable bracket for either all-in-one CPU coolers or custom loop configurations
The new H500 Overwatch Edition mid-tower case is available globally from NZXT, with U.S. pricing set at $149.99.
Subject: General Tech | February 19, 2019 - 09:51 AM | Jim Tanous
Tagged: valve, store, steam
As it approaches its sixteenth birthday, Valve's Steam client is long overdue for a redesign. Facing new competition in an increasingly fragmented digital games marketplace, Valve late last year teased that a fresh overhaul of Steam's look and feel was on the slate for 2019.
And while Valve hasn't made any official announcements regarding the timing of the Steam redesign, users are beginning to notice some changes that indicate a rollout may begin sooner rather than later. Most notably, Valve has quietly updated Steam's About page, which now sports a much more modern look, complete with bold text, simpler graphics and icons, and lots of white space (technically "dark" space in Steam's case).
There's also an auto-playing video in the upper-right corner that shows a simplified Steam interface layout that significantly differs from the current design.
Others have noticed that certain interface elements within Steam, such as a pop-up window listing mod prerequisites, are now displaying a different look in terms of fonts and colors.
Valve has already taken a componentized approach to Steam updates, releasing redesigned chat and wishlist interfaces last year, so it's not clear if the overall store and client redesign will be unveiled all at once or roll out piece-by-piece over time.
Subject: General Tech | February 18, 2019 - 01:26 PM | Jim Tanous
Tagged: humble, games, deals, 505 games
Forget the pasta, bring some Italian goodness into your life another way this week with the 505 Games Sale over at the Humble Store. Take your pick of 16 games and a dozen DLCs from the Italian game publisher at up to 90% off.
Titles include Assetto Corsa, ABZÛ, Brothers - A Tale of Two Sons, and Virginia. All games activate via Steam. The sale is on now through Monday, February 25th at 10:00 a.m. PST. Check it out to save some money on some great games, and don't forget to check the Charity box during checkout to help support some worthy causes.
PC Perspective is a Humble Partner, so we earn a small commission if you purchase any games from this sale via our link. We appreciate your support but if you want to check out the sale without supporting us, just use this unaffilaited link here.
Subject: Graphics Cards | February 18, 2019 - 12:07 PM | Scott Michaud
Tagged: nvidia, graphics drivers, geforce
Apparently the latest WHQL driver, 418.81, can cause random application crashes and TDRs (“Timeout Detection and Recovery”) issues on Windows 7 and 8.1. NVIDIA has followed up with a hotfix driver, 418.99, that addresses the issue.
Hotfix drivers do not undergo full testing, so they should not be installed unless you are concerned about the specific issues they fix. In this case, because the bug does not affect Windows 10, a Windows 10 driver is not even provided.
In case you’re wondering what “Timeout Detection and Recovery” is, Windows monitors the graphics driver to make sure that work is being completed quickly (unless it is not driving a monitor – Windows doesn’t care how long a GPU is crunching on compute tasks if it is not being used for graphics). If it hangs for a significant time, Windows reboots the graphics driver just in case it was stuck in, for example, an infinite loop caused by a bad shader or compute task. Without TDR, the only way to get out of this situation would be to cut power to the system.
Subject: General Tech | February 18, 2019 - 11:27 AM | Scott Michaud
Tagged: esa, speedrun, charity
Another video game speedrun marathon has just begun. The European Speedrunner Assembly (ESA) Winter 2019 event started a few hours ago, at 7am EST, and will continue until the games are done, which should be Saturday evening. The last item on the schedule is a race of Cuphead between kalevan_herra, Kirthar, and TwoCPlus in the All Bosses, Regular, Legacy category, although there is a $1,000 donation incentive where kalevan_herra will do an extra solo run of All Bosses, Regular, Current Patch after the race.
One interesting feature of ESA is that they tend to run two streams with separate games. While the second stream is not online for the whole marathon, it allows them to separate out some (not all) of the long runs so that the main stream can have a faster pace. The Stream 2 game with the fastest estimate (2 hours and 10 minutes) is Jade Empire on Tuesday at 4:30pm EST, and Stream 2 game with the longest estimate (10 hours and 45 minutes) is Final Fantasy X on Thursday at 7am EST.
ESA Winter 2019 benefits Save the Children.