All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: General Tech, Cases and Cooling, Shows and Expos | June 4, 2011 - 11:28 PM | Ryan Shrout
Tagged: computex, thermaltake, frio, level 10, power strip
Thermaltake had its standard booth array of cases, coolers, keyboards, mice, headphones, etc but also had some new items to show us when we stopped by. The first was a new "Snow Edition" of the Level 10 GT chassis we reviewed back in April.
The case remains mostly unchanged with some USB 3.0 ports up front, 5 "EasySwap" HDD bays and room for some very long graphics cards. The white color is not paint but rather plastic injected so you won't have to worry about the paint scratching off.
Next up is the Frio GT CPU cooler - yes the above image is showing you a freaking CPU COOLER. It supports up to 300 watts of cooling and does so with an enormous amount of heatpipes, fins and airflow. This cooler will be available in Q4 and should cost you under $100.
Under the two big collections of fins you can see the heatpipes that move the energy from the CPU cores. Obviously you are going to need to check out your case and motherboard dimensions before picking up a cooler like this as I imagine there are going to be quite a few configurations that are incompatible.
Thermaltake is also going into the self-contained water cooling direction as well with the internally designed and built BigWater A80. Thermaltake claims this device will get better results than the competition by including some interesting airflow modifications. Expect this to be very price competitive and be available in Q3.
A big surprise at the booth was new USB-controlled power strip called the "Wireless USB Control Series". Besides offering some convenient USB outlets directly on the power strip, this surge protector also has a USB powered remote control that will turn on and off the "Energy Saver" ports with the push of a button.
The remote sits in a little stand on top of your desk so you can power offer your display, printer or other devices all at once and without reaching behind anything. For those of you that want to go green then this will allow you to do so for a modest cost of $30-40 later this year.
Subject: Motherboards, Shows and Expos | June 4, 2011 - 10:42 PM | Ryan Shrout
Tagged: x79, fusion, ECS, e-350, computex, 990fx
ECS, aka Elitegroup, had a large booth at Computex that focused more on its ODM aspects than consumer aspects, but there were still a couple of interesting designs to look at.
The board we spotted was the new A990FXM-A motherboard that is of course based on the latest 990FX chipset from AMD. Supporting the AM3+ processor socket and thus the pending AMD Bulldozer processors, the 990FX is going to be a long term product rather than a short term. One interesting addition to the board is found on the chipset heatsink that has a temperature reactive plastic on it that will turn from grey to orange-ish as the ambient case temperature increases. This could be a great feature to easily gauge the heat level inside a windowed case.
Also an interesting move, ECS has elongated the receptacle on the 8-pin CPU power connection to make it easier to plug in and to remove. If you have ever experienced a pinched finger or sliced finger nail from trying to reach down and unplug an ATX connector, you will see this as a nice addition.
ECS also had its X79 motherboard variant on display, showing the company's readiness for the pending Sandy Bridge-E release.
Also on the motherboard wall was the upcoming A75F-A with support for the AMD Llano Fusion-based processors that should be ready later in the summer.
Finally, a motherboard that we have just recently received for review purposes, the HDC-I is an AMD E-350 or E-240 Zacate platform mini-ITX form factor. This solution might be a great option for users looking to build an HTPC box so be sure you check out our full review coming shortly.
Subject: Cases and Cooling, Shows and Expos | June 3, 2011 - 12:15 AM | Ryan Shrout
Tagged: performance series, p280, computex, antec
Upstairs at the Antec booth at Computex 2011, a new case sat awaiting our eyes and cameras called the Performance Series P280. A successor to the long-adored P180 case, the P280 will offer a host of tweaks and new features while maintaining a price point of about $130 on the street.
The fit and finish of the P280 should look familiar to anyone that has laid eyes on the P180. This time Antec has added two internal USB 3.0 ports in addition to a pair of USB 2.0 ports on the front panel.
The door on this case has the same over-swing as the P180 to completely fold away on the side if needed. There are three 5.25-in bays and a dual fan removable filter.
On the top of the case are pair of fans that use the newer rubber grommet style connection to lessen any kind of noise or rattle from them.
Both doors (and the top) of the P280 are lined with a very heavy compressed plastic that is used as a sound dampening device. Antec claims this is more effective than the foam insulation siding that many case vendors are currently using or that Antec uses on the P180.
Hit the "Read More" link for more photos and details on Antec's P280!!
Subject: General Tech, Shows and Expos | June 2, 2011 - 11:59 AM | Jeremy Hellstrom
Tagged: windows 8, computex
There is a lot of buzz after the unveiling of Window 8 to a select few at Computex. VR-Zone has a nice series of pictures as well as about 20 minutes of video footage from the preview event. AnandTech focused on the ARM version and the new filesystem, while Engadget were content to delve even deeper into the ARM support offered by Win8. ExtremeTech was more interested in the browser side, examining IE10 and the future Java and HTML5 as well as looking at the touch interface abilities.
"VR-Zone was in attendance for this historic Windows 8 unveiling event to selected partners and press at W Hotel Taipei, COMPUTEX 2011. Microsoft showed off its new Windows 8 UI design and a few x86/ARM prototype devices from its partners."
Here is some more Tech News from around the web:
- Bulldozer delayed and not delayed @ SemiAccurate
- Qualcomm Uplinq 2011 Day One Keynote - Mobile is King @ AnandTech
- Texas Instruments announces a dual-core 1.8GHz OMAP4 system-on-chip @ The Inquirer
- Microsoft postpones IDP for 2 weeks to re-consult with chip players @ DigiTimes
- Creative Labs' Pure Wireless Modularity Event Coverage @ Tweaktown
- Computex 2011 - Shuttle PC @ TechwareLabs
- Computex Highlights - Day 2 @ Ninjalane
- G.Skill & ASUS Live Extreme Overclocking at Computex @ VR-Zone
- ZiiLABS demos JAGUAR 7 and JAGUAR 10 Honeycomb Tablets @ VR-Zone
- AMD E-450 APU Spotted At Computex @ VR-Zone
- Hardware firms are tight-lipped on Acer’s 'troublesome Microsoft' comments @ The Inquirer
- The crooks who created modern wiretapping law @ Ars Technica
- Wave of Trojans breaks over Android @ The Register
- A Chance to Win a Gigabyte GTX 560 Overclock @ Bjorn3D
- Memorial Day Giveaway @Hi Tech Legion
Subject: Motherboards, Shows and Expos | June 2, 2011 - 05:13 AM | Ryan Shrout
Tagged: X58, overclocking, gigabyte, computex
Releasing a motherboard based on the X58 chipset at this point might seem odd, but when you can offer a unique take on the overclocking market you might just find a niche. Gigabyte is hoping that is the case with the new X58A-OC model that is going to be priced very competively thanks in large part to the removal of many features.
The orange and black color scheme on the board is actually pretty unique while the layout is setup in a way for quad-GPUs - you are going to need that to break those overclocking records.
In the top right hand corner there are a host of overclocking specific features. The "4G" button will automatically overclock basically any Nehalem processor to something above 4.0 GHz while the Gear button will decrease the size of the increments available to the user on voltage to the processor. The ratio and frequency +/- buttons are going to be of great use for overclocking a system on the fly without having to go through the trouble of entering a BIOS. Don't forget you have your power and reset buttons and voltage monitoring leads here too.
Where Gigabyte saves a bit of money is with the non-overclocking features; things like eSATA and high-end audio are left out so that the even the classic external connection space is pretty bare.
You will also notice near the SATA data connections some SATA-style power connectors as well. These are used to supply extra voltage to the PCI Express connections for overclocking and pushing quad graphics cards.
Subject: Motherboards, Shows and Expos | June 2, 2011 - 04:52 AM | Ryan Shrout
Tagged: ssd, socket 2011, llano, intel ssd, gigabyte, computex, APU
We stopped by the Gigaybte booth during Computex 2011 this week and found a host of new motherboards that range from the mainstream to the ultra-extreme.
First up is the A75-UD4H that supports the new AMD FM1 socket and the upcoming AMD Llano processor. Even though the APU will have integrated graphics on die, the Gigabyte board support AMD Dual Graphics technology and CrossFire multi-GPU solutions in conjunction with 8 USB 3.0 ports.
The board will include output connections of VGA, DVI, HDMI and DisplayPort along with size USB ports, four of which are USB 3.0.
The Z68XP-UD3 motherboard is one that will be offered in two different ways: one with an SSD and one without. The "iSSD" model will actually include an mSATA Intel 20GB SLC SSD and should come in at a cost of under $250. Considering the Larson Creek drive will cost you anywhere from $90-110 on its own, the combination of a Z68 motherboard and SSD is actually very price competitive. Plus, you get the convenience of having the SSD on the motherboard without it taking up a 3.5-in or 2.5-in drive bay.
For those that choose to get the lower cost board without the included Intel SSD you will be able to choose from several other newcomers to the mSATA form factor including Kingston and OCZ.
Of course we had to take a look at the Socket 2011 motherboard, the X79A-UD3 with support for the upcoming Intel Sandy Bridge-E processor. According to the slide information this will include a new version of the SSD caching technology called RSTe (Rapid Storage Technology Enterprise) with support for USB 3.0 and quad-channel DDR3 memory.
For those that haven't seen, here is a close up of the Socket 2011 in all its glory - that's a lot of pins!!
Subject: Processors, Shows and Expos | June 1, 2011 - 09:28 AM | Ryan Shrout
Tagged: trinity, llano, fusion, computex, bulldozer, APU, amd
While talking up the new 900-series of chipset and the branding for the upcoming AMD Llano APU launch, AMD did surprise us by showing off a bit more of the future than typical. Rick Bergman, general manager of the AMD Product Group, pulled a Trinity-based APU out of his pocket to demonstrate the conviction of staying on a "one-APU-per-year" cycle in the years to come.
While it looks just like any other AMD processors from a distance, this Trinity APU is based on the Bulldozer x86 architecture (which will see the first release as a CPU only later this year) and combines some amount of SIMD-units (aka Radeon cores) for a CPU/GPU combo. This will be the part that succeeds Llano, due out in a few short days.
This roadmap shows the cadence of once a year will be the norm for AMD going forward and that AMD plans to introduce an APU for the tablet market sometime in 2012. It will be interesting to see how late to the game AMD is in this arena and if they can compete with what ARM is doing or even what Intel will be doing with Medfield.
Subject: Graphics Cards, Shows and Expos | June 1, 2011 - 08:58 AM | Ryan Shrout
Tagged: computex, asus, gputweak, overclocking, oc
While perusing the ASUS booth for notebooks and graphics cards and motherboards, we also spotted some new overclocking software that looked kind of interesting.
ASUS GPUTweak will ship with ASUS graphics cards starting later this year but they did indicate that it will be available as free download for users of ANY brand of graphics card; which is a nice way to gain some street cred. The software combines a monitoring application, overclocking application and custom version of GPU-Z in a single interface to allow users to really push their GPUs beyond stock settings.
Besides the semi-standard options of frequency (both GPU and memory), voltages and fan speeds, ASUS GPUTweak software will allow users of ASUS Matrix / ROG graphics cards to modify the timings on their GPU memory as well, something that is unique to its offerings.
The software will also allow you "burn" settings into your Matrix cards BIOS so that they will boot at the overclocked settings regardless of the any installed software or operating system. There is a Safety button on all Matrix cards to revert back to the original settings in case of an emergency...
It is nice to see ASUS jumping into the ring here with some competent software and I am curious to see how it will be welcomed after we have seen MSI's Afterburner application become such a hit with gamers.
Subject: Storage, Shows and Expos | June 1, 2011 - 08:37 AM | Ryan Shrout
Tagged: ssd, revodrive, ocz, hybrid, computex
OCZ is definitely pushing its SSD products to the consumer and it was no different when we stopped by the OCZ suite at Computex 2011. The most interesting devices came in the form of PCI Express based SSDs including the pending RevoDrive 3 model that upgrades the SSD controllers to SandForce 2200 models and gets some pretty hefty performance boosts because of it.
The RevoDrive 3 includes a pair of SF-2200 controllers and was rated at 900 MB/s read and 700 MB/s write using the PCIe x4 interface. The 240GB model is apparently only going to have a $599 price tag and it should be available in a matter of a short few weeks. The X2 model adds another module to the mix and doubles the controller count to four and improves performance to as high as 1500 MB/s read and 1200 MB/s write. Obviously these types of devices are only for those that REALLY need to push the envelope in storage performance.
Also, more good news: OCZ has implemented a newer firmware feature on the RevoDrive 3 (and other newer PCIe based models) that will enable support for features like TRIM natively. This is done by hiding the multiple controllers from the operating system and passing on / delegating the TRIM commands as needed. Allyn will have more on this when we get a sample later this month.
Another new PCIe-based SSD was the new Z-Drive R4 that fits more into the enterprise market with insanely high IOPS and performance.
OCZ actually showed a server running a pair of the R4 88 models that were able to achieve a 1 million IOPS rating on random 4K.
Another option for consumers was the new RevoDrive Hybrid that is exactly what it sounds like it is - a combination of a PCI Express SSD and a standard 2.5-in spindle based drive on a single unit. This will bring the performance benefits of not only an SSD but a PCIE SSD to consumers that want to have the appearance of a single large hard drive inside their system. It will use SandForce SF-2200 controllers and is rated at 575 MB/s read and 500 MB/s writes with several models planned for production. The SSD portion that acts as the cache will be available in either 60GB of 120GB capacities while the HDD will start at 500GB and go up from there. Pricing will apparently start at $400 for the 60GB/500GB version and will definitely be appealing for enthusiasts. Now everyone can get the advantages of hybrid storage without being locked into the Z68 chipset or even an Intel platform at all.
This implementation does not use any kind of Intel technology at all and instead is based on a firmware option from NVELO called Dataplex. Based on the marketing numbers we saw the implementation that OCZ has created with the PCIe-based SSD will outperform Intel's SATA-based SRT technology by a noticeable margin, at least in benchmarks. We can't wait to get our hands on one to see for ourselves.
Finally, OCZ is going to throw their hat into the ring with the mSATA offering called the Devena 2 that runs on a SandForce SF-2181/2141 controller. Expect to see this marketed as an option even for Intel SRT. It looks like the rest of 2011 will be very busy for Allyn and our storage test bed.
Subject: Graphics Cards, Motherboards, Shows and Expos | June 1, 2011 - 07:57 AM | Ryan Shrout
Tagged: computex, msi, pcie, x79, 990fx, z68
MSI had quite a showing at this year's Computex starting with a host of new motherboards based on the Z68 chipset. The most interesting of which was the new Z68A-GD80 (G3) that in addition to including all the features of the Sandy Bridge processor, SLI, CrossFire, Lucid Virtu and things like OC Genie II and Military Class Components II, is the first motherboard we have seen that integrates support for the PCI Express 3.0 specification.
MSI was able to do this by simply adhering to the already existing PCIe 3.0 specifications and claims the performance doubles from 8 GB/s up to 16 GB/s (for a x16 connection). Even though there are no PCIe 3.0 accessories or graphics cards on the market today, MSI has seen performance improvements when testing PCI Express based solid state drives like the OCZ Revo. We are eager to get this board in the hands of our storage guru and see what advantages it offers users today.
Next up is the new MSI 990FXA-GD80 motherboard based on AMD's latest 990FX chipset. We actually have one of these in the office and should have a review up shortly. With support for today's Phenom processors and tomorrow's Bulldozer-core based designs, I think the 990FX chipset will find its way into a lot of users machines.
Even further out into the future, we saw a glimpse of an MSI engineering sample for the pending Socket 2011 processors from Intel, the MSI X79A-GD65. Supporting the upcoming Sandy Bridge-E processor family and a new quad-channel memory controller, you can clearly see the 2011 socket is HUGE and requires the memory slots to be divided up on either side of it. A lot will change more than likely between now and this boards release but it is cool to see a preview of what is in store for us!
Finally, MSI did have another card in the Lightning series to show off, the N580GTX Lightning Xtreme Edition. This card has all the same engineering features of the previous Lightning models but adds in a couple of unique features called Smart Temp Sensor and Dust Removal.
The Smart Temp Sensor is actually a coating on the fan that changes from blue to white in appearance as the ambient temperature increases. If the inside of your chassis hits the 45C mark then the fans will be completely white and should give you an indication of system stability. My only concern is that even users with windows on their cases will have trouble seeing the fans on the graphics card cooler posted at a right angle.
The Dust Removal feature is more interesting in that it runs the fans on the Xtreme Edition in the reverse direction for the first 30 seconds of the power cycle and then return to the proper direction for cooling the heatsinks. The idea is that the 30 second reverse interval will help clear out dust from the heatsink and from the fan blades itself saving users in the long run.
Another interesting feature coming very soon to Android phone users is the ability to monitor and overclock your MSI graphics cards via an Afterburner app for your phone. This will be available this month or early in July for Android and *maybe* by the end of the year for iPhone.
Subject: Cases and Cooling, Shows and Expos | May 31, 2011 - 11:23 PM | Ryan Shrout
Tagged: solo, PSU, high current gamer, computex, antec
While at Computex 2011 we stopped by the Antec booth to see what the company had on display for new gear going into the second half of 2011. While we of course saw Antec's line up of existing cases and power supplies, and of course the SoundScience audio options, there were a couple of new items on the floor as well.
First up was a visit with Joerg Theissen, formerly of Enermax, and a showing of the upcoming Antec High Current Gamer Plus series of power supplies. Available in a 550 watt, 650 watt and 750 watt version, the updated "Plus" series innovates by building in very high amperages in each of the various 12V rails; up to 40 amps on each! This allows the power supply to supply power to current and future graphics cards even with the smaller 550 watt PSU capacity.
The Plus series is also going with a modular system that gives the user a very flexible expansion capability. While the red and black outlets for cables fit with what most users will use, you can in fact install up to 10 HDD cables on the power supply should you need it. Antec's goal with the new High Current Gamer Plus is to make a unit that addresses both the high end performance segment customers are used to as well as lowering the price to a point where it can address a large majority of the DIY market overall.
The second new item was the Solo II chassis, a low cost design that actually includes some impressive features. Built on a combination of steel and aluminum, the Solo II is one of the first designs we have seen with built in support for the Slim ODD form factor, right out of the gate.
Inside the case you will see only a few HDD cages though for a small case it does offer support for even the largest graphics cards in this way. You will also see a cutout on the motherboard tray for rear access to the CPU the brackets as well as some other openings for improved cable management.
The front of the case opens up to reveal a pair of filtered intake fans and behind them the hard drive bays. The Solo II offers both your standard screw-less tray design as well as elastic suspension based HDD mounting options, similar to those seen in the LanBoy Air.
Even though this is going to be a low cost case (estimate $99-129), Antec has included some noise reduction material that is a form of highly compressed plastic that they claim works nearly as well as the foam substance used on the Antec P180. It is installed on both doors as well as the top of the Solo II.
Overall I have to say that the Solo II looks like a great chassis for users that don't need a gluttony of space and also have to work on a budget.
OCZ Achieves Performance Record Live At Computex, Over 1 Million 4K Write IOPS & 1.5 Million Read IOPS
Subject: General Tech, Storage, Shows and Expos | May 31, 2011 - 01:55 PM | Jeremy Hellstrom
Tagged: z-drive, PCIe SSD, ocz
TAIPEI, Taiwan - May 31, 2011 - OCZ Technology Group, Inc. (Nasdaq:OCZ), a leading provider of high-performance solid-state drives (SSDs) for computing devices and systems, announces the Company has set a new benchmark of 1 million 4K write IOPS with a Z-Drive R4 equipped 3U Colfax International Server based on a Supermicro platform, which features 7.2TB of MLC storage.
As the fastest performing single server solution on the market, this Z-Drive R4 equipped platform significantly accelerates demanding transactional workloads and reduces latency across a broad array of enterprise applications.
"The Z-Drive R4 enables our data center clients to maximize performance in the industry standard 4K file size, and this achievement with Colfax International demonstrates the raw performance benefits and latency reductions that OCZ PCIe SSDs can deliver over multi-terabyte device densities in a single 3U server," said Ryan Petersen, CEO of OCZ Technology Group. "We are proud to enable our clients to deliver servers and storage arrays which provide the highest performance, maximum capacity, and lowest latency available to data centers today."
"We have been working closely with OCZ to create a ready to deploy server solution with both exceptional performance and reliability, all within a compact and energy efficient footprint," said Gautam Shah, President and CEO of Colfax International. "OCZ's Z-Drive PCIe SSDs add considerable performance and we are thrilled to achieve this significant 4K Write IOPS benchmark, as well as making this industry leading total solution available to our enterprise clients."
This demonstration highlighted the Z-Drive R4's ability to offer industry-leading performance and efficiency for enterprise clients seeking the benefits of SSDs over hard drives. This total solution will be available for pre-order from Colfax International in multiple built-to-order configurations, and will ship in the coming weeks following the Computex event.
Subject: Graphics Cards, Shows and Expos | May 31, 2011 - 11:59 AM | Jeremy Hellstrom
Tagged: computex, computex 2011, ocz, Intel, Ivy Bridge
You may have noticed with the new look to PC Perspective have come several new features, such as tags to group common topics together to make it easier to find them. The important tag right now is computex, which will group all of the news we have reported from Computex.
Ryan is not the only attendee of the conference, so in order to ensure you have enough information to keep you satiated over the day you can take a look at AnandTech's coverage as well. They spent time with OCZ, discussing the RevoDrive Hybrid, a standard 0.5/1TB platter based HDD and a Vertex 3 SSD on PCIe card, a form factor that Intel's SRT has made obsolete but is still interesting to see. The new PCIe based Z-Drive on the other hand can do very impressive things, the R4 88 has eight SF-2281 controllers in RAID 0! RevoDrives with TRIM support are also very nice to see. Intel talked about both the upcoming Ivy Bridge platform as well as their plans for USB 3.0 and Thunderbolt.
Stay tuned for more.
Here is some more Tech News from around the web:
- AMD is the fourth WARM, Windows 8 tablet partner @ SemiAccurate
- What's Killing Your Wi-Fi? @ Slashdot
- Is Fedora 15 Faster Than Ubuntu 11.04? @ Phoronix
- Sony Cyber-Shot DSC-WX9 Review @ TechReviewSource
- The TR Podcast 88: Exposing the midrange
- Apple drops secrecy, confirms iOS 5, iCloud on tap at WWDC 2011 @ Ars Technica
- Interview with Mark Doherty of Adobe @ t-break
- Bulldozer mobos from Asus and MSI: Sabertooth 990FX & 990FXA-GD80 @ The Tech Report
- The New Indilinx Everest SSD @ AnandTech
- A Quick Look at a 22nm Ivy Bridge Wafer @ AnandTech
Subject: Graphics Cards, Shows and Expos | May 31, 2011 - 02:41 AM | Ryan Shrout
Tagged: computex, asus, GTX 580, mars, matrix, ROG
While also announcing a set of new motherboard at Computex 2011, ASUS was also showcasing two new graphics cards in the Republic of Gamers line based on NVIDIA’s GeForce GTX 580 GPU. The MATRIX GTX580 and MARS II cards will offer a unique take on performance and engineering that haven’t been seen in the enthusiast graphics markets before.
The MATRIX GTX580 will offer support for TweakIt, ProbeIt and SafeMode overclocking capabilities at the hardware level while the GPU Tweak software will allow the user to adjust setting and monitor the card in the OS. The card is built with a 19-phase construction (!!) which should offer very impressive power efficiency as well as stability during overclocking. The cooler on the MATRIX card also promises to be 20% improved on the NVIDIA reference design.
The MARS II goes a step further by including a PAIR of GTX 580 GPUs on a single PCB offering what will likely be the fastest graphics card on the planet. The same hardware features like TweakIt and ProbeIt as well as the GPU Tweak software and the 19-phase power construction.
It looks like if you want the fastest graphics solutions available ASUS will have you covered with either the MATRIX GTX580 or the MARS II, depending on your wallet capacity.
Subject: Processors, Mobile, Shows and Expos | May 31, 2011 - 02:01 AM | Ryan Shrout
Tagged: ultrabook, Medfield, Ivy Bridge, Intel, haswell, computex, atom
With the release of the Intel Z68 chipset behind us by several weeks, Intel spent the opening keynote at Computex 2011 creating quite a buzz in the mobility section of the computing world. Intel’s Executive Vice President Sean Maloney took the stage on Tuesday and announced what Intel is calling a completely new category of mobile computer, the “Ultrabook”. A term coined by Intel directly, the Ultrabook will “marry the performance and capabilities of today’s laptops with tablet-like features and deliver a highly responsive and secure experience, in a thin, light and elegant design.”
If this photo looks familiar...see the similarity?
Intel is so confident in this new segment of the market that will fall between the tablet and notebook that they are predicting that by the time we reach the end of 2012 it will represent 40% of Intel’s processor shipments. That is an incredibly bold claim considering how massive and how dominate Intel is in the processor field. Intel plans to reach this 40% goal by addressing the Ultrabook market in three phases, the first of which will begin with ultra-low-power versions of today’s Sandy Bridge processors. Using this technology Maloney says we will see notebooks less than 0.8 inches thin and for under $1,000.
Make sure you "Read More" for the full story!!
Subject: Editorial, General Tech, Shows and Expos | May 29, 2011 - 06:08 PM | Ryan Shrout
Tagged: pcper, computex 2011, computex
It is that time of year again where the staff at PC Perspective wades through the moist air of Taipei, Taiwan to bring you the latest news, videos and updates from the world of technology and computing hardware. This marks my 10th appearance on the island of Taiwan, but Ken's first so it should be an interesting experience for both of us.
Yes, this scary girl is here again too.
This year we have a surprising amount of expected hardware to investigate starting with an onslaught of AMD-based technology. The AMD 990FX chipset will be out and about in force from the likes of ASUS, MSI, ECS and others while the Fusion APUs will be flaunted in notebooks and likely even some "surprise" Llano designs. Intel's Z68 chipset, though already launched, will still be a focus but the company will surprise many with a dramatic move into the world of mobile computing with the Atom line.
Temperatures are high but so is the excitement!!
Subject: Storage, Shows and Expos | May 16, 2011 - 04:34 PM | Tim Verry
Tagged: Thecus, SAN, NAS, computex
Thecus, a leading provider of Intel based NAS (Network Attached Storage) products, has announced that they will be unveiling a new XXX line powered by Intel Sandy Bridge processors and offering 10G Base T Connections at 2011's Computex in Taipei. The XXX line covers everything from 2 bay Atom powered NAS for consumer useage all the way to the new 16 bay Sandy Bridge powered NAS for enterprise use. The "XXX" stands for "Xtreme Power, Xtreme Function, and Xtreme Value," and it is their line of the best performance for the price NAS devices.
They will be unveiling an eight bay, twelve bay, and sixteen bay NAS which they have dubbed the N8900, N12000PRO, and N16000PRO respectively. The eight bay NAS will be powered by a dual core Intel i3 2120 at 3.3GHz while the twelve and sixteen bay NAS devices will be powered by a quad core Intel Xeon E3-1280 at 3.5GHz. Considering that these chips are sought after for enthusiast and workstation computers much less NAS boxes, they will be able to eliminate CPU bottle-necking and provide ample horsepower to feed all of the NAS devices' internal drives. Thecus confidently states that "these models are guaranteed to dominate the market with excellent results for consumers jues like their predecessors."
Thecus further states that their new NAS devices offer 100% availability with 10 G Base T HA and iSCSI SAN (Storage Area Network) "with absolutely no breaks or delays in service in rain, shine, or Armageddon." Their NAS boxes "finally give businesses a true alternative to messy, bulk, budget-busting servers."
Whether their claims will hold up to testing or not, Thecus certainly seems confident in their product and are not afraid to follow the adage of "go big or go home" as they partner with Intel to power their NAS boxes with the latest and greatest in CPU technology.
Subject: General Tech, Systems, Mobile, Shows and Expos | May 12, 2011 - 05:00 PM | Tim Verry
Tagged: tablet, notebook, msi, computex
VR-Zone reports that MSI is gearing up for a large Computex showing, and will unveil 5 new mobile products to it's existing platforms.
Among the rumored launches are two tablets and three notebooks. On the tablet side of things, both a Tegra 2 and AMD Brazos powered tablet are in the works. The WindPad 100A will be powered by a Tegra 2 SoC and will run Android 2.3 in lieu of Honeycomb due to rumored hardware compatibilities. The AMD Brazos platform brings AMD's fusion processor and graphics to the mobile space. The WindPad 110W, the follow up to the Intel Atom powered 100W, will utilize the Brazos SoC running Windows 7.
As far as notebooks, the gaming lineup, C series, and X series will all see a refresh. The GT683 will be a 15" gaming notebook. The CX480 will update the C series with a rumored 14" form factor. Finally, MSI's thin and light notebook lineup will receive the X460.
VR-Zone further states that "MSI is also said to be losing interest in netbooks due to declining demand and is refocusing on its notebook products as the company is expecting a 10 to 15 percent growth in notebook shipments this year, not taking tablets into account."
Subject: Processors, Shows and Expos | May 12, 2011 - 12:22 PM | Jeremy Hellstrom
Tagged: VIA, Nano, quadcore, quad, centaur
VIA has been sitting pretty in a very specific peice of the computer market for quite a while now and is now being crowded by AMD and Intel working their way down to the low power market from their usual energy gobbling silicon and ARM sneaking up its performance from its traditional extremely low power consumption market. That competition has spurred VIA to develop first the dual core Nano X2 and now the QuadCore which is a pair of X2's on a single package using what was described to The Tech Report as a "side channel" of wiring between them. Still on 40nm it doesn't represent a completely new design for VIA, more a refinement of what they already produce. Check out their coverage as well as the write up Josh has finished here.
"Early this year, Via introduced its Nano X2 processor, a dual-core implementation of its Isaiah architecture built on TSMC's 40-nm chip fabrication process. Today, Via is announcing a new product, the QuadCore processor, that combines a pair of Nano X2 chips on a single package to deliver a low-cost, low-power CPU whose position in the market is fairly distinctive.
We visited Via-Centaur's Austin, Texas offices yesterday, where we chatted with Centaur Chief Architect Glenn Henry and Via marketing head Richard Brown. We came away with some fresh details on the QuadCore processor and a better sense of Via's future plans as an intriguing third-place supplier of x86-compatible PC processors."
Here are some more Processor articles from around the web:
- VIA QuadCore Preview & Centaur Tour @ [H]ard|OCP
- VIA's QuadCore: Nano Gets Bigger @ AnandTech
- The Best Budget & Mainstream Processors @ Techspot
- Intel Core i7 990X Extreme Edition Processor Review @ Legit Reviews
- Desktop CPU Comparison Guide Rev. 10.3 @ Tech ARP
- AMD Phenom II X2 555 Black Edition AM3 Processor Review @ eTeknix
- AMD Phenom II X4 980 Black Edition Processor Review @Hi Tech Legion
Subject: Shows and Expos | January 12, 2011 - 11:29 AM | Jeremy Hellstrom
The Tech Report is catching up on their writing after beating feet around Las Vegas to meet with as many vendors and manufacturers as possible. At the ASUS booth they saw several tablets and a Xonar soundcard squeezed into a thumb drive like form factor, various SandyBridge motherboards from EVGA, Gigabyte