All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Memory | July 19, 2007 - 02:12 PM | Jeremy Hellstrom
Sunnyvale, Calif - July 19, 2007 - OCZ Technology Group, the worldwide leader in innovative, ultra-high performance and high reliability memory, today unveiled the next step to achieving maximum performance on the latest PC platforms with the launch of the World's first production PC3-14400 DDR3 modules. These OCZ kits are meant to set industry performance standards as well as accelerate the development of next-generation enthusiast platforms.
Subject: Memory | July 17, 2007 - 02:46 PM | Jeremy Hellstrom
Sunnyvale, Calif. - July 17, 2007 - OCZ Technology Group, Inc., a worldwide leader in innovative, ultra-high performance and high reliability memory, today announces two new 1600MHz parts including the world's first enhanced bandwidth high speed DDR3. The newest additions to the OCZ DDR3 family offer enthusiasts performance they can really sink their teeth into and feature blazing fast speeds of 1600MHz and the incredibly fast latencies of 7-7-7 and 7-6-6 on ASUS motherboards.
Subject: Memory | July 12, 2007 - 04:04 PM | Jeremy Hellstrom
Fountain Valley, CA (July 12, 2007) Kingston Technology Company, Inc., the
independent world leader in memory products, today announced it is first to
market with ultra low-latency PC3 1375MHz DDR3 HyperX memory modules,
driving memory benchmarking and gaming further and faster than ever before.
"Our new HyperX DDR3 ultra low latency modules give early adopters and
performance enthusiasts the opportunity to push their DDR3 motherboards as
far as current memory technology will allow," said Mark Tekunoff, senior
technology manager, Kingston.
Subject: Memory | July 11, 2007 - 05:55 PM | Jeremy Hellstrom
Mushkin's XP2-6400 is 800MHz
DDR2 with latencies of 4-4-3-10, and sits between 1.9V-2.1V. Once techPowerUp! verified the RAM was stable, they tested it up to 568 MHz @ 5-5-5-15 by bumping the voltage up to 2.35V. They were disappointed that they couldn't get the DIMMS down to 3-2-2-4, but they decided the overclocking capabilities it exhibited makes this RAM a good deal.
Subject: Memory | July 3, 2007 - 04:15 PM | Jeremy Hellstrom
The new kid on the block is DDR3, with high frequencies, but also high timings. TweakTown tries out a set of 1066 DDR2 and DDR3 DIMMs by overclocking the DDR3 to 1333 and 1500 with the best timings they can manage, and going gaming. You can get a good idea as to whether the technology is mature enough that you want to switch, or stay with high speed DDR2.
Subject: Memory | June 26, 2007 - 05:04 PM | Jeremy Hellstrom
HEXUS tries out Corsair's DOMINATOR XMS2-10000 (with and without the Airflow fan), Kingston's HyperX KHX9600D2K2/2G, OCZ's Reaper HPC Edition PC2-9200, CellShock's DDR2 1000 and G.SKILL's F2-6400CL4D on an eVGA NF68 with an Intel C2D Extreme X6800. There are some differences in the speeds that these DIMM's run at, but you might be surprised how closely they score.
Subject: Memory | June 21, 2007 - 12:15 PM | Jeremy Hellstrom
Sunnyvale, Calif. - June 20, 2007 - OCZ Technology Group, a worldwide leader in innovative, ultra-high performance and high reliability memory, today announced the newest OCZ DDR3 product addition.
Subject: Memory | June 19, 2007 - 01:57 PM | Jeremy Hellstrom
Sunnyvale, CA - June 18, 2007 - OCZ Technology Group, Inc., a worldwide leader in innovative ultra-high performance and high reliability memory, today announced the PC2-6400 Platinum Vista Performance Edition 4GB (2x2048MB) dual channel kit.
Subject: Memory | June 19, 2007 - 12:05 PM | Jeremy Hellstrom
The Reaper line of heatpipe cooled memory from OCZ continues to expand, and HotHardware grabbed the 2 from the middle of the pack. The Reaper HPC PC2-8500 is rated for 1066MHz, @ 5-5-5-15, and theSource: HotHardware
Subject: Memory | June 7, 2007 - 02:41 PM | Jeremy Hellstrom
[H] got a sneak peek of some really impressive RAM from Corsair. The timings aren't really that impressive, 10-10-10-24, but the 1000MHz clock speed is fantastic! They've got benchmark pictures you have to see to believe.
Subject: Memory | June 4, 2007 - 02:36 PM | Jeremy Hellstrom
It is certainly true that DDR3 will soon become the memory of choice for Intel systems, as of yet it cannot beat DDR2's champions. One of the best is OCZ's Reaper HPC PC2-9200. With their new cooling method, pushing these DIMMs beyond their rated 1150MHz is quite easy, and the performance is absolutely top notch. TweakTown shows you j
Subject: Memory | June 4, 2007 - 11:09 AM | Jeremy Hellstrom
COMPUTEX Taipei, Taiwan (June 4, 2007) Corsair, the worldwide leader in high performance computer and flash memory products, today unveiled the world's fastest production DDR3 memory rated at a blazing-fast 1,600MHz (PC3-12,800) and the world preview of the Corsair DOMINATOR memory running at 2,000MHz (PC3-16,000). Live demonstration of the new DOMINATOR memory will be on display in the Corsair VIP suite (#1334) at the Grand Hyatt Hotel. The TWIN3X2048-1600C10D DOMINATOR is the latest addition to the Corsair line of high-performance memory modules.
Subject: Memory | May 29, 2007 - 01:06 PM | Jeremy Hellstrom
Kingston has announced it's new lineup of low(er) latency DDR3. The timings available on DRR3 will take some getting used to, as even these tightly timed DIMMs look sloppy compared to high end DDR2, but the as the actual clockspeed increases, those timings won't seem so bad. The modules AnandTech tested are rated at DDR3-1375 @ 7-7-7-20, and when they were clocked up to 1520 @ 8-8-8-22 they left Corsair's Dominators in the dust.
Subject: Memory | May 24, 2007 - 04:56 PM | Jeremy Hellstrom
If you are curious as to what the difference between DDR2 and DDR3 is, OCModShop has published the perfect article for you. The increase in maximum speed is the real difference, but if you are looking to find out how that is achieved, and why DDR2 can't just keep be pushed faster then dig into the article.
Subject: Memory | May 23, 2007 - 11:35 AM | Jeremy Hellstrom
Sunnyvale, Calif. May 22, 2007 OCZ Technology Group, a worldwide leader in innovative, ultra high performance and high reliability memory, today announced their official crossover into DDR3 memory to coincide with the recent launch of the Intel Bearlake Chipset. OCZ's hand tested DDR3 solutions enable ardent enthusiasts to take advantage of the highly anticipated P35 platform while experiencing the legendary quality and reliability of OCZ memory.
Subject: Memory | May 22, 2007 - 02:58 PM | Jeremy Hellstrom
The new Reaper series from OCZ really impressed Overclockers Online. Running at 1150 @ 5-5-5-18 straight out of the box they are some of the fastest chips, period. The new cooling solution both adds style to the DIMMs as well as some very good cooling. Once they got down to testing, they found limitations in tightening the timings, but by keeping the timings at the rated intervals, they could get a nice jump in speed.
"The performance of these Reaper HPCs at 5-5-5 certainly was br
Subject: Memory | May 16, 2007 - 02:40 PM | Jeremy Hellstrom
AnandTech has grabbed 2 DIMMs of DDR3-1066 running at 7-7-7-20 and an ASUS P5K3 Deluxe. The contrast that pairing with an ASUS P5B Deluxe and Corsair's Dominator DDR2-1111. They varied the speeds to get a better idea of performance, unfortunately there are no DDR3-1333 DIMMs available yet, but when they are they will revisit the test to see what effect the raw speed has. Is timing everything?
Subject: Memory | May 10, 2007 - 02:27 PM | Jeremy Hellstrom
Gone are the days when there was a 4GB limit on addressable memory because of the limitations of 32-bit processors. WinXP and Vista both come in 64-bit version which has a theoretical limit of 16,000,000 GB of RAM
Subject: Memory | May 8, 2007 - 01:00 PM | Jeremy Hellstrom
Sunnyvale, Calif.-May 7, 2007-OCZ Technology, a worldwide leader in
innovative, ultra-high performance and high reliability memory, today
unveiled a unique memory kit for AMD enthusiasts and power users. The new
PC2-5400 Titanium modules were designed exclusively for the AMD AM2 platform
and are custom-tailored to the extended column address range of the AM2
memory controller. With a doubled page size, access penalties are reduced to
ultimately improve system performance.