All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: General Tech, Displays | December 2, 2013 - 02:20 AM | Scott Michaud
Tagged: dell, ultrasharp, UP2414Q, 4k
Dell Belize published an overview of the UltraSharp UP2414Q 24" 4K monitor. I must say, 3840x2160 in a 24" display would certainly look make text look "ultra sharp". The rest of the company still does not appear to be acknowledging its existence but I think this is a pretty safe rumor.
One of the selling points of Dell UltraSharp monitors is its color gamut. It is not too difficult to find a monitor with 100% sRGB coverage, but Adobe RGB is quite larger; the UP2414Q claims to be able to reproduce 99% of it. This means that, if properly calibrated, the monitor can reach "further colors" instead of approximating them. Specifically, 100% Adobe RGB is roughly the gamut possible with color printers.
Put into perspective: my Wacom Cintiq 22HD claims 72% coverage of Adobe RGB.
Image Credit: Wikipedia
Not much else is known about this display. It does not have a price. It does not have a release date. It does not even have an official announcement date. They do claim to calibrate the monitors before they leave the factory so that is some other information, I guess. It has four USB 3.0 ports and a 6-in-1 card reader.
But I can imagine the biggest omission for our audience is: there is no official announcement about refresh rates. Ian Cutress down at Anandtech assumes, based on the Dell UltraSharp 32" UP3214Q monitor, it will support 60Hz only using two DisplayPort 1.2a connectors in MST; otherwise, 4K will be limited to 30Hz.
I would be surprised if he is not correct.
Subject: Displays | November 14, 2013 - 02:58 PM | Jeremy Hellstrom
Tagged: AOC, 144hz, G2460PQU
AOC's G2460PQU is a 24" 1080p display at 144Hz which should give you a smoother experience when gaming. It supports DVI-D, DSUB, HDMI and DisplayPort and has four USB ports on the sides including a power boosted one for recharging. The overall look is rather nice but the power button is oddly placed on the underside alongside the inputs. eTeknix tried out this display and you can see what they thought in their full review.
"Recently I took a look at one of these new 144Hz panels from AOC, namely the G2460PQU and on the whole I was impressed with the quality of the build and the feature set on offer, but most importantly, the difference that the faster refresh rate made to not only game play but also during day-to-day usage."
Here are some more Display articles from around the web:
- AOC G2460PQU 144hz 24 inch Monitor @ Kitguru
- Iiyama ProLite XB2779QS @ Hardware.info
- Philips 242G5 144Hz LCD Gaming Monitor @ eTeknix
- 20 affordable IPS monitors group test: IPS to the people @ Hardware.info
- Nvidia G-Sync in action @ Hardware.info
- 3M SPR1000 Streaming Projector Powered by Roku Review @ MissingRemote
- Peerless AV LCT420A Single Arm LCD Desktop Mount @ eTeknix
- Samsung KE55S9C Curved OLED TV @ Hardware.info
Subject: Graphics Cards, Displays | October 20, 2013 - 02:50 PM | Ryan Shrout
Tagged: video, tom petersen, nvidia, livestream, live, g-sync
UPDATE: If you missed our live stream today that covered NVIDIA G-Sync technology, you can watch the replay embedded below. NVIDIA's Tom Petersen stops by to talk about G-Sync in both high level and granular detail while showing off some demonstrations of why G-Sync is so important. Enjoy!!
Last week NVIDIA hosted press and developers in Montreal to discuss a couple of new technologies, the most impressive of which was NVIDIA G-Sync, a new monitor solution that looks to solve the eternal debate of smoothness against latency. If you haven't read about G-Sync and how impressive it was when first tested on Friday, you should check out my initial write up, NVIDIA G-Sync: Death of the Refresh Rate, that not only does that, but dives into the reason the technology shift was necessary in the first place.
G-Sync essentially functions by altering and controlling the vBlank signal sent to the monitor. In a normal configuration, vBlank is a combination of the combination of the vertical front and back porch and the necessary sync time. That timing is set a fixed stepping that determines the effective refresh rate of the monitor; 60 Hz, 120 Hz, etc. What NVIDIA will now do in the driver and firmware is lengthen or shorten the vBlank signal as desired and will send it when one of two criteria is met.
- A new frame has completed rendering and has been copied to the front buffer. Sending vBlank at this time will tell the screen grab data from the card and display it immediately.
- A substantial amount of time has passed and the currently displayed image needs to be refreshed to avoid brightness variation.
In current display timing setups, the submission of the vBlank signal has been completely independent from the rendering pipeline. The result was varying frame latency and either horizontal tearing or fixed refresh frame rates. With NVIDIA G-Sync creating an intelligent connection between rendering and frame updating, the display of PC games is fundamentally changed.
Every person that saw the technology, including other media members and even developers like John Carmack, Johan Andersson and Tim Sweeney, came away knowing that this was the future of PC gaming. (If you didn't see the panel that featured those three developers on stage, you are missing out.)
But it is definitely a complicated technology and I have already seen a lot of confusion about it in our comment threads on PC Perspective. To help the community get a better grasp and to offer them an opportunity to ask some questions, NVIDIA's Tom Petersen is stopping by our offices on Monday afternoon where he will run through some demonstrations and take questions from the live streaming audience.
Be sure to stop back at PC Perspective on Monday, October 21st at 2pm ET / 11am PT as to discuss G-Sync, how it was developed and the various ramifications the technology will have in PC gaming. You'll find it all on our PC Perspective Live! page on Monday but you can sign up for our "live stream mailing list" as well to get notified in advance!
NVIDIA G-Sync Live Stream
11am PT / 2pm ET - October 21st
We also want your questions!! The easiest way to get them answered is to leave them for us here in the comments of this post. That will give us time to filter through the questions and get the answers you need from Tom. We'll take questions via the live chat and via Twitter (follow me @ryanshrout) during the event but often time there is a lot of noise to deal with.
So be sure to join us on Monday afternoon!
Subject: Displays | September 13, 2013 - 01:27 PM | Jeremy Hellstrom
Tagged: dell, U3014, 30 inch, 2560x1600
Hardware Canucks have been thoroughly enjoying themselves with the new Dell 30" display, the UltraSharp U3014. The 2560x1600 display might be expensive but if you can afford the asking price it will not disappoint. If you look very carefully during fast paced action you might see a hint of ghosting but not enough to distract you from your game. Professionals will appreciate the 10-bit colour capability and the numerous colour settings will help you while creating content. Take a look at the full review here.
"Dell's new flagship monitor, the UltraSharp U3014 is everything we could possibly want. It uses a 16:10 AH-IPS panel, boasts one of the best color rendition scores around and simply outpaces nearly everything else out there."
Here are some more Display articles from around the web:
- Philips Brilliance 298P4QJEB 29” UltraWide Monitor Review @ Hardware Canucks
- Sharp PN-K321H review: 4K monitor @ Hardware.info
- SilverStone SST-ARM11SC Single Monitor Interactive Arm @ Benchmark Reviews
- Samsung UN55F6400AF Review @ TechReviewSource
Subject: General Tech, Displays, Systems | August 31, 2013 - 03:25 PM | Scott Michaud
Tagged: LG, AIO, 21:9
HDTVs have an aspect ratio, the proportion between width and height, of 16:9. This, more noticeably rectangular, format was seen as a suitable compromise between 4:3 tradition and the many widths of theatrical releases. Computers, high resolution since the 90s (give-or-take) to fit more stuff on screen, first adopted many HD innovations.
Widescreen, however, was firmly resisted. Internet video was not popular or even known to the general public. Vista, with its sidebar optimizations, was expected to make 16:10 tolerable. 16:9 was too wide to even be considered an effective option for documents and websites.
I must say: I don't know how I'd live without Sidebar making my monitor feel wastefully narrow and...
Now that the public is comfortable with 16:9, because at some point it ceased to be scary for display manufacturers, some are experimenting with even wider niches. 2560x1080 has about a third more width than a "FullHD" panel to add another side-by-side-by-side document to edit or snapped website to refer to. At this point, if people want to buy it, do it.
LG, at IFA 2013, unveiled their V960 all-in-one (AIO) desktop. This computer is housed inside a 29" 21:9 (technically 64:27, but those numbers are big and scary) IPS display. Despite lacking a touchscreen, and despite OSX screenshots for its also announced plain monitors in its promo image, the AIO comes with Windows 8 pre-installed. It houses a mobile GeForce GT 640M GPU and... well that is about all we know of its internals.
The company believes that you might use some screen width for picture-in-picture TV browsing. LG is not too clear on what functionality will be available to the V960. Other monitors in the line contain a TV tuner, but they never specified whether the AIO would have a tuner or just an HDMI input. Also unclear, whether video inputs are accessible to the computer for DVR functionality or whether it is delivered straight to the display.
The LG V960 was on display at IFA 2013. No pricing and availability information has been announced by LG.
Subject: Displays | August 22, 2013 - 02:40 PM | Jeremy Hellstrom
Tagged: hd, 2560x1440, asus, dell, eizo, fujitsu, hp, LG, Iiyama, philips, Samsung
Hardware.info had a chance to review 14 different 2560x1440 displays of which all but three they could find for sale; prices ranged from $500 to $950. That price range is interesting as all of the displays reviewed were 27" models, so the disparity is not caused by larger screens. Gamers may want to head straight to their findings on Response Time and Input Lag but you should spend the time to read the whole round up if you are more interested in the colour accuracy.
"Most IT product categories tend to evolve rapidly, but developments in computer monitors have been decidedly slower. Although larger screens are slowly becoming more affordable, the most common resolution remains 1920x1080 pixels. Nonetheless, this year we're seeing more and more manufacturers release WQHD monitors. Hardware.Info collected 14 different models of these very impressive monitors and tested them to find out which is the best one to get."
Here are some more Display articles from around the web:
- Asus ProArt PA249Q 24″ AH-IPS LCD Monitor @ eTeknix
- Nixeus VUE 30: 30" 2560x1600 IPS Monitor @ AnandTech
- Vizio M501D-A2R Review @ TechReviewSource
- SilverStone ARM11SC Arm One Monitor Mount @ Phoronix
Subject: Displays | July 30, 2013 - 05:42 PM | Jeremy Hellstrom
Tagged: Lenovo, thinkvision, ips display, LT3053p
The Lenovo ThinkVision LT3053p is an 30" IPS LED backlit display with a 2560×1600 resolution and a hefty price tag of around $1500. For that price you do get some interesting input choices including a mobile high definition link port, which looks like an HDMI input except for the MHL label as well as both DisplayPort 1.2 in and an DP 1.2 out to allow you to daisy chain another monitor to the Lenovo. As well a single USB 2.0 and four USB 3.0 ports were installed, including a dedicated charging port like is seen on many laptops now on the market. For professionals this monitor is able to display 30bit colour and 99% Adobe RGB gamut. Benchmark Reviews also demonstrated how the monitor can be split and accept sources from two different computers and have a mouse and keyboard hooked up directly so that it can act as a sort of KVM switch. The features are interesting but it is hard to get over the sticker shock.
"In the past year or so flat panel monitor prices have entered free-fall, with massive 27″ displays widely available for under $300. Given that, why would anyone even consider spending over $1,500 on a somewhat larger 30″ display? Lenovo has lent Benchmark Reviews one of their ThinkVision LT3053p units to review, so let’s see what all that extra money buys you."
Here are some more Display articles from around the web:
- ASUS PQ321Q UltraHD Monitor Review: Living with a 31.5-inch 4K Desktop Display @ AnandTech
- Asus VG248QE Review @ TechReviewSource
- Dell UltraSharp U2913WM @ Hardware.info
- Samsung LS24C750 @ Hardawre.info
- HP Envy 27 Review @ TechReviewSource
- Panasonic TC-L55ET60 Review @ TechReviewSource
- Panasonic TC-L55DT60 Review @ TechReviewSource
- Sony KD-55X9005: first affordable UHD 4K TV @ Hardware.info
- LG 55LA8600 Review @ TechReviewSource
Subject: General Tech, Graphics Cards, Displays | July 25, 2013 - 07:32 PM | Scott Michaud
Tagged: eyefinity, crossfire, 4k
Sharp recently sampled a few of their 32" 4K monitors to Microsoft's Extreme Windows. The blog, known for editorializing what enthusiasts can do with Microsoft products, combined three 3840 x 2160 monitors into a 3x1 Eyefinity configuration at 60 Hz; the screen, itself, measures about 7 feet diagonally. This configuration, unlike the already-supported three-display 30 Hz and single-display 60Hz 4K modes, required AMD to develop a customized driver before Sharp's repo-team reclaimed their $15,000 worth of monitors.
They had a day until their door was to be knocked.
The system, three Radeon HD 7970s in Crossfire, successfully drove... they were playing Dirt 3, by the way... the three monitors at 60 Hz with between 62 and 70, of software recorded, FPS. 11,520 x 2160, at 60 Hz, requires 1.5 billion colors to be calculated within a second of animation; that is 1.5 gigapixels. Ignore, for a moment, stutter caused by including Crossfire with an Eyefinity setup. Every calculation, whether properly drawn to the monitor or not is, and must be, performed; 1.5 gigapixels is impressive and an accomplishment for Radeon hardware.
Lastly, I need to call out drama as I see it: power supplies. It is not hard to find a PSU which can support a three-GPU system and no reason for it to be hanging outside the case. It might give off the bleeding-edge appearance, but this is not arc welding. If they really were concerned, they could have picked up a higher capacity device from the shelf of a local component reseller.
Subject: Displays | July 24, 2013 - 03:59 PM | Tim Verry
Tagged: ultrasharp 32, ultrasharp, ultra hdtv, UHD, igzo, dell, 4k
Dell showed off a new Ultra HD (UHD) monitor called the UltraSharp 32 at SIGGRAPH 2013 this week. The new monitor has a 32" IGZO, or Indium Gallium Zinc Oxide, panel, which is a technology developed by Sharp that allows for smaller pixels or faster reaction times. (A similar panel is used in the ASUS PQ321Q that Ryan recently reviewed.). The panel has a 4K resolution of 3840 x 2160 and comes with a matte finish. Dell claims that its new 4K monitor supports up to 1.07 billion colors.
The monitor is fitted to an aluminum stand that allows for height ajustment. The monitor itself is rather thin, but still manages to fit an SD card reader on the left-hand side. The rest of the ports are located on the rear of the monitor, however. IO on the Dell UltraSharp 32 includes:
- 1 x DisplayPort
- 1 x Mini DisplayPort
- 3 x USB
- 1 x SD
Unfortunately, other specifications such as refresh rate are unknown. Dell has not yet released pricing information, but has stated that the UltraSharp 32 will be available in Q4 of this year. I think this is good for consumers as it should help bring 4k monitor prices down as competition heats up between the various manufacturers using these IGZO panels.
Engadget was on hand at SIGGRAPH and managed to snap several photos of the new monitor which are worth checking out.
Subject: General Tech, Displays | July 20, 2013 - 11:36 PM | Ryan Shrout
Tagged: video, seiki, SE39UY04, hdtv, displays, 4k, 3840x2160
After the interest in our overview of the SEIKI 50-in 4K HDTV last April, we got word that SEIKI was making a smaller version of the same television. The SE39UY04 is now available and sells for just under $700 at various online retailers and is surely piquing the interest of many PC users and enthusiasts with the combination of a 3840x2160 resolution and 39-in screen size.
In nearly every way, this 39-in model is identical to the 50-in version with the exception of size and pixel density. Having just recently published a review of the ASUS PQ321Q 4K monitor on PC Perspective I can now report that the move from 60 Hz screens to 30 Hz screens, even at this kind of resolution and screen size, is very apparent.
Below is our initial video unboxing and overview of the new SEIKI SE39UY04. Check it out and leave us any questions or ideas below!
Subject: Graphics Cards, Displays | July 18, 2013 - 08:16 PM | Ryan Shrout
Tagged: pq321q, PQ321, nvidia, drivers, asus, 4k
It would appear that NVIDIA was paying attention to our recent live stream where we unboxed and setup our new ASUS PQ321Q 4K 3840x2160 monitor. During our setup on the AMD and NVIDIA based test beds I noticed (and the viewers saw) some less than desirable results during initial configuration. The driver support was pretty clunky, we had issues with reliability of booting and switching between SST and MST (single and multi stream transport) modes caused the card some issue as well.
Today NVIDIA released a new R326 driver, 326.19 beta, that improves performance in a couple of games but more importantly, adds support for "tiled 4K displays." If you don't know what that means, you aren't alone. A tiled display is one that is powered by multiple heads and essentially acts as multiple screens in a single housing. The ASUS PQ321Q monitor that we have in house, and the Sharp PN-K321, are tiled displays that use DisplayPort 1.2 MST technology to run at 3840x2160 @ 60 Hz.
It is great to see NVIDIA reacting quickly to new technologies and to our issues from just under a week gone by. If you have either of these displays, be sure to give the new driver a shot and let me know your results!
Subject: Displays, Shows and Expos | June 12, 2013 - 08:24 PM | Ryan Shrout
Tagged: Oculus, oculus rift, VR, E3
I have been a big proponent of the Oculus Rift and its move into the world of consumer-ready VR (virtual reality) technology. I saw it for the first time at Quakecon 2012 where Palmer Luckey and John Carmack sat on stage and addressed the new direction. Since then we saw it at CES and finally got in our own developer kit last month for some extended hands-on.
While I have definitely been impressed with the Rift in nearly every way while using it, the first thing anyone says when putting on the headset for the first time is about the graphics - the resolution of the unit was just too low and it creates a "screen door" effect because of it. As I wrote in my first preview:
I will say that the low resolution is definitely a barrier for me. Each eye is only seeing a 640x800 resolution in this version of the kit and that close up you can definitely see each pixel. Even worse, this creates a screen door effect that is basically like looking through a window with a screen installed. It's not great but you could get used to it if you had to; I am just hoping the higher resolution version of this kit is closer.
At E3 2013 the team at Oculus was able to put together a very early prototype of an HD version of the screen. By using a new 1920x1080 display each eye is able to see 960x1080; roughly twice the pixel density of the initial developer kit.
I got to spend some time with the higher resolution model today and I have to say that the difference is striking - and instantly noticeable. Gone was the obvious screen door effect and I was able to focus purely on the content. The content itself was new as well - Oculus and Epic were showing the Unreal Engine 4 integration with a custom version of the Elemental demo. The colors were crisp, the effects were amazing and only in a couple of rare instances of solid white color did we notice the black lines that plagued the first version.
As of now Oculus doesn't have plans to offer an updated developer kit with the 1080p screen installed but you just never know. They are still looking at several different phone screens and haven't made any final decisions on which direction to go but they are definitely close.
When I inquired about improvements on head tracking latency and accuracy to aid in motion sickness concerns (like I seem to have) Oculus was hesitant to say there was any single fix. Instead, a combination of lower latency, better hardware and even better thought out content were key to reducing these effects in gamers.
Subject: Displays, Shows and Expos | June 12, 2013 - 07:58 PM | Ryan Shrout
Tagged: wqxga, wqhd, monoprice, ips, E3, 2560x1440
While wandering the halls at E3 to talk with NVIDIA and AMD about the future of gaming, I ran across a small booth with Monoprice in it. If you don't know Monoprice, it is an online seller of electronics and cables and much of its merchandise can be found throughout the offices at PC Perspective.
In recent months Monoprice made news with PC gamers as one of the first major retailers to begin selling the low-cost 27-in 2560x1440 monitors shipping from Korea. While the monitors are likely very much the same, buying from a local company in the US rather than trusting an eBay buyer in Korea brings a lot of peace of mind to the transaction. Getting a dead pixel and 1 year warranty along with it helps too.
On hand at E3 was the Monoprice IPS-ZERO-G Monitor that runs at a 2560x1440 resolution with a single dual-link DVI input. This is an updated to the first model Monoprice shipped with a newer, thinner design and an even better $390 price point.
Monoprice also is offering a model with an internal scalar that allows the display to include additional inputs like HDMI, VGA and DisplayPort. The 27-in IPS-G Pro will sell for $474 and will also be tuned for AdobeRGB and sRGB options.
In addition to the two 27-in models, Monoprice also has added 30-in 2560x1600 monitors: the IPS CrystalPro and the IPS Pro with the same primary differentiation - input support.
I am looking forward to getting my hands on these Monoprice display options to see if they can live up to the levels of the other Korean-built displays we have in the office. If they do, then I think we have a new reason for PC gamers to celebrate.
Another interesting find at the booth were some new HDMI cables using a RedMere controller on the connector to allow for extremely thin (and long) runs. First shown at CES in 2008, the RedMere RM1689 chip runs solely on the power provided by the HDMI output and allows cables to use much less copper to create thinner designs. They will obviously cost a bit more than standard options but you can see from the photo above the difference is striking.
While they did fail to provide us with a price we do know that some time this month ASUS will be offering a 4K display for sale in North America, so you may not have to special order one from overseas anymore. Of course as the two models are 39" and 31.5" you can expect a premium price as not only is 4K relatively new, the sizes of these monitors are also very new to the market ... at least for PCs. The extra size does bring the pixel density down to 140 ppi but you will still have beautiful picture quality.
Taipei, Taiwan (30 May, 2013) — ASUS today announced the PQ321 True 4K UHD Monitor, a desktop display with a stunning Ultra HD 3840 x 2160 resolution that’s equivalent to four Full HD displays stacked side-by-side. The PQ321 has a 31.5-inch LED-backlit 4K Ultra HD display (140 pixels-per-inch) with 16:9 aspect ratio, and supports 10-bit RGB ‘deep color’ for vibrant images with more natural transitions between hues.
Cutting-edge IGZO panel technology
The ASUS PQ321 True 4K UHD Monitor uses cutting-edge Indium Gallium Zinc Oxide (IGZO) rather than traditional amorphous silicon for the active layer of its LCD panel. IGZO panels support much smaller transistors than amorphous silicon, which in turn gives much smaller pixels and the 3840 x 2160 resolution of the PQ321 is four times that of a 1920 x 1080 Full HD display.
176-degree wide viewing angles on both vertical and horizontal planes minimize onscreen color shift, while the 350cd/m² brightness rating and 8ms gray-to-gray response time ensure smooth, bright, and vibrant moving visuals. IGZO technology also gives reduced energy consumption compared to amorphous silicon and reduces bulk — at 35mm at its thickest point, the PQ321 is the thinnest 4K UHD monitor available today.
Comprehensive video inputs for UHD content
The ASUS PQ321 True 4K UHD Monitor features DisplayPort and US models offer dual-HDMI ports inputs with Picture-by-Picture support. Built-in 2W stereo speakers remove the need for additional desktop clutter and, in addition to being wall-mountable, the monitor stand offers full height, swivel, and tilt adjustment.
AVAILABILITY & PRICING
ASUS will be exhibiting the 39-inch and 31.5-inch True 4K UHD Monitor models at Computex 2013 in Taipei. The ASUS PQ321 True 4K UHD Monitor will be available in North America in the end of June.
Subject: General Tech, Displays, Shows and Expos | May 31, 2013 - 02:12 AM | Scott Michaud
Tagged: PQ321, computex, asus, 4k
Computex, the second largest expo for computer hardware, is less than a week away but its influence tends to bleed over a little bit. And, since we know our readers love 4K displays, we thought we might pass along a leak we found for a new ASUS monitor.
Image source, ASUS via TechPowerUP
And yes, that is a 32"
The Asus PQ321 is both a relatively easy-to-remember model number and a 31.5" computer monitor with 4K2K resolution. Connect it to your computer with DisplayPort or, for at least some US models, dual HDMI to have the same resolution as IMAX Digital as well as have a legitimate reason to pick up multiple GeForce Titan graphics cards.
The raw specifications are:
- 31.5 inch display size (16:9 aspect ratio)
- Indium Gallium Zinc Oxide (IGZO) panel, LED backlit
- 3840x2160 resolution (140ppi)
- 1.07 billion colors (10-bit RGB)
- 176 / 176 (H / V) degree viewing angle
- 350 cd/m2 brightness
- 8ms (gtg) response time
- Color temperature and gamma adjustments
- I/O: DisplayPort, 2x HDMI ("optional"), RS-232C, 3.5mm audio in and out
- 2W stereo speakers
- Tilt, swivel, height adjustments; VESA mount (no landscape/portrait pivot)
- 750mm x 489mm x 256mm with stand, 13kg net weight
- Comes with DisplayPort 1.2 cable and an RS-232C conversion cable (???)
Looking at these specifications, it certainly feels like an IPS-equivalent technology with some very telltale characteristics: the relatively slow response time for seemingly no reason, the 1.07 billion colors, the very wide viewing angle, and the relatively high pixel density per inch. This prompted me to look over at the ASUS website for some tea leaf reading. It looks as though all P- or M-series monitors utilize some form of IPS technology, the M-series referring to thin-bezel options and the P-series to relatively image quality-focused products.
So as best as I can tell, the PQ321 is a 31.5" 4K IPS monitor.
ASUS is expected to display this at Computex 2013 in Taipei along with a 39" 4K monitor. No word on pricing or availability, at least not yet.
Subject: Displays | May 23, 2013 - 01:08 AM | Tim Verry
Tagged: quad hd, philips, epi, 2560x1440, 2560x1080, 21:9
Envision Peripherals Inc. (EPI), a company that sells Philips monitors in North America recently announced three new high resolution IPS desktop monitors. The company is releasing one 29” 21:9 monitor for consumers and two high resolution displays for professionals.
Philips Brilliance 29” UltraWide Monitor
This Philips monitor is of the 21:9 variety and offers up a resolution of 2560 x 1080 on its AH IPS display. The monitor features a narrow bezel, built-in speakers, and comes bundled with SmartControl software to adjest settings via a PC software application.
It has DL-DVI, DisplayPort, HDMI, and (optional) Thunderbolt video inputs. It supports MultiView technology, which allows the monitor to accept multiple video inputs and display them simultaneously on the screen.
The Philips Brilliance 29” UltraWide display is available now at online retailers like Amazon. While it has an MSRP of $599 according to the press release, Amazon is actually charging $667.90 for the monitor currently.
While the Brilliance 29” UltraWide is aimed at consumers, the following two monitors are intended for professionals doing CAD, finance, and art/design work.
P-Line 29” UltraWide Monitor
The P-Line 29” UltraWide is a 21:9 monitor for professionals. It features a 2560 x 1080 resolution AH IPS display with MultiView technology and a “ultra narrow” bezel. EPI claims that the display has both a 178-degree vertical and horizontal viewing angles. There are four USB 3.0 port as well as a height-adjustable stand.
Video inputs include DisplayPort 1.2a ports that allow daisy chaining monitors. The MultiView technology also allows the display to show two display inputs simultaneously.
The monitor is available now to business customers from resellers like CDW for $699.
P-Line 27” Quad HD Monitor
Finally, the P-line 27” Quad HD monitor is the final new professional series display. It has the highest resolution at 2560 x 1440 (109 PPI). This IPS display supports 8-bit color and has a professional price to match. The monitor itself has a height-adjustable stand, built-in speakers, a 2MP webcam with microphone, USB 3.0 ports, and a PowerSensor which detects when the user leaves the computer and automatically dims the display. EPI claims that the PowerSensor results in up to 80% power savings. It would be useful for businesses, though less crucial for home users.
Like the P-line 29” UltraWide, this monitor can daisy chain other monitors to the PC video output via DisplayPort connectors. Video inputs include DL-DVI, DisplayPort, HDMI, and Thunderbolt.
It is available now from resellers with an MSRP of $799.
You can find the full press release below.
Subject: Editorial, General Tech, Displays | April 22, 2013 - 05:34 PM | Scott Michaud
Tagged: LG, ips, hack
Operators are standing by...
Of course Apple is not a primary manufacturer of LCD panels; like everyone else, they buy their panels from someone like LG. Due to how much Apple loves IPS technology, which I cannot blame them for, they in fact do purchase their displays from LG.
If you have an itchy soldering iron, so can you.
According to EmertHacks, the LG part number for retina iPad screens is LP097QX1-SPA1. The blog post states that he could find the panel for as cheap as $55, but my own digging game up with costs between $60 and $200 plus shipping. These panels are mostly destined to iPad repair shops, but you can give it a better home.
With under $20 of other parts, this panel could be attached to a DisplayPort connection. All said and done, you could have a 2048x1536 9.7" display with an 800:1 static contrast ratio for about $70.
Subject: General Tech, Graphics Cards, Displays | April 18, 2013 - 08:52 PM | Ryan Shrout
Tagged: video, seiki, se50UY04, hdtv, hdmi 1.4, displays, 4k, 3840x2160
This just in! We have a 4K TV in the PC Perspective Offices!
While we are still working on the ability to test graphics card performance at this resolution with our Frame Rating capture system, we decided to do a live stream earlier today as we unboxed, almost dropped and then eventually configured our new 4K TV.
The TV in question? A brand new SEIKI SE50UY04 50-in 3840x2160 ready display. Haven't heard of it? Neither have we. I picked it up over the weekend from TigerDirect for $1299, though it actually a bit higher now at $1499.
The TV itself is pretty unassuming and other than looking for the 4K label on the box you'd be hard pressed to discern it from other displays. It DID come with a blue, braided UHD-ready HDMI cable, so there's that.
One point worth noting is that the stand on the TV is pretty flimsy; there was definitely wobble after installation and setup.
Connecting the TV to our test system was pretty easy - only a single HDMI cable was required and the GeForce GTX 680s in SLI we happened to have on our test bed recognized it as a 3840x2160 capable display. Keep in mind that you are limited to a refresh rate of 30 Hz though due to current limitations of HDMI 1.4. The desktop was clear and sharper and if you like screen real estate...this has it.
The first thing we wanted to try was some 4K video playback and we tried YouTube videos, some downloaded clips we found scattered across the Internet and a couple of specific examples I had been saving. Isn't that puppy cute? It was by far the best picture I had seen on a TV that close up - no other way to say it.
We did have issues with video playback in some cases due to high bit rates. In one case we had a YUV uncompressed file that was hitting our SSD so hard on read speeds that we saw choppiness. H.265 save us!
And of course we demoed some games as well - Battlefield 3, Crysis 3, Skyrim and Tomb Raider. Each was able to run at 3840x2160 without any complaints or INI hacks. They all looked BEAUTIFUL when in a still position but we did notice some flickering on the TV that might be the result of the 120 Hz interpolation and possibly the "dynamic luminance control" feature that SEIKI has.
We'll definitely test some more on this in the coming days to see if we can find a solution as I know many PC gamers are going to be excited about the possibility of using this as a gaming display! We are working on a collection of benchmarks on some of the higher end graphics solutions like the GeForce TITAN, GTX 680s, HD 7990 and HD 7970s!
If you want to check out the full experience of our unboxing and first testing, check out the full live stream archived below!!
Subject: Displays | April 10, 2013 - 03:13 PM | Jeremy Hellstrom
Tagged: WPCTVPRO, videostream, displaylink, diamond multimedia
If you have a need for a second display which is not directly wired to your machine you have several choices, from the Cthulu card Ryan reviewed to Intel's WiDi to the upcoming product from the HSA. There is another choice available which comes as an external device, the Diamond VideoStream WPCTVPRO uses a DisplayLink DL-165 chip to stream video and audio to a second monitor that has a receiver attached. Bjorn3D tried it out and found it more than capable of sending a 1080p signal in almost all cases although the broadcast range is relatively short which could impact your decision. Check out the full details here.
"The Diamond VideoStream WPCTVPRO is a new device to help you setup a dual-monitor without a long wire connected to your PC. Using DisplayLink technology, the device communicates to your secondary monitor (TV for example) wirelessly through Ultra Wide Band (UWB). How does it perform? Does it live up to its promise? Let’s find out."
Here are some more Display articles from around the web:
- Dell S2340L @ The Inquirer
- G 23ET83V-W Review @ TechReviewSource
- BenQ GW2750HM Monitor @ XSReviews
- AOC D2757Ph review: affordable luxury @ Hardware.ingo
- Medion Akoya X54000 review: cheap touchscreen @ Hardware.info
- Aoc D2757Ph 3D Monitor @ Rbmods
- BenQ W1060 1080p DLP Projector @ XSReviews
- Sharp LC-70LE650 Review @ TechReviewSource
Subject: General Tech, Displays | April 8, 2013 - 01:45 PM | Jeremy Hellstrom
If you are shopping around for a 24" IPS LCD then today's deal might be custom made for you. The Dell UltraSharp U2410 24" IPS is currently discounted $165 and comes with free shipping. It is a full 1920x1200 display with HDMI, DVI-D and DisplayPort inputs and even better it has a ghosting time of 11 ms and an input lag so low as to be undetectable which makes it perfect for gaming.
Dell UltraSharp U2410 24" IPS-panel LCD Monitor with HDMI & DisplayPort
Today only. Dell is offering UltraSharp U2410 24-inch LCD Monitor for $384.30 with FREE shipping. Use 33% instant savings to get final price.