All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Cases and Cooling | June 4, 2017 - 11:04 AM | Tim Verry
Tagged: water cooling, SFX-L, SFF, phanteks, mini ITX, htpc, evolv shift x, evolv shift
Phanteks Project 217 prototype case is finally official and will be known as the Evolv Shift and Evolv Shift X. Both are small form factor cases that feature a unique tower design that has the approximate footprint of a large graphics card, but manages to fit quite a bit of hardware inside by building up rather than out. The skyscraper style cases measure 6.7” wide and 10.63” deep. The Evplv Shift is the shorter of the two at 18.9” tall while the Evolv Shift X is 25.9”. The Mini ITX cases are constructed from a powder coated steel frame, aluminum cover panels, and tempered glass side panels.
HardwareCanucks shot video of the new SFF cases!
The Evolv Shift and Shift X both have black aluminum insides and a silver aluminum front panel. There are fam vents around the edges of the front panel and two USB 3.0 ports tucked away on the side. The top of the case covers the motherboard I/O and has a cutout in the back for routing the I/O cables out of the case - on the Shift X this piece is also aluminum but on the Shift it is plastic to cut costs. The two tempered glass side panels and front and back panels are held on by thumbscrews to allow for easy removal to work on the build. Being able to take all four sides off should make to easier to build in the small space.
Other case features include removable case feet that enables you to lay the case horizontally on one of its two sides (so you can show off the CPU side or GPU side), dust filters up front, and separation of the two front fans and compartments so that one can be an intake and the other exhaust if you wish. For such a small case there is quite a njt of cable management going o with rubber grommets and horizontal cable tracks (with a magnetic door for easy access) to hid away your cables and pass them from the PSU compartment to the motherboard compartment). Interestingly the GPU is mounted vertically and the bracket can be rotated and adjusted left and right so that you can choose to see the back of the graphics card or (finally!!) the front of the card with the artwork -- that’s right a case that lets you see and show off the stickers and cooler of your graphics card! (hehe, it has always irked me they put the artwork on the part of thr GPU you usually never see once it's in the case.)
Internally, the case is divided into two main areas with the power supply on bottom along with room for water cooling pumps and reservoirs and the motherboard, processor, and graphics cards stacked on top of the PSU area. The Evolv Shift and Evolv Shift X both support small form factor power supplies (SFX and SFX-L), Mini ITX motherboards, and even large graphics card thanks to the riser cable and vertical mounting. The larger Shift X can also hold ATX PSUs with the caveat that you have to give up the PSU shroud.
Cooling support includes air and water coolers with up to three 120mm or 140mm fans up front and one 120mm or 140mm fan in the bottom. The case will come with two 140mm fans out of the box.
As far as storage is concerned the case had room for two 2.5” drives and either one 3.5” drive on the Shift or two 3.5” drives on the Shift X.
Oh, and there is also an included RGB controller if you want to add a bit of bling to your dual windowed skyscraper PC.
The Evolv Shift and Evolv Shift X are coming later this year for $110 and $160 respectively.
These look to be very unique cases that will look good on a desk or even in the living room as a home theater PC. I am looking forward to the reviews on these as I am curious how well the case can keep high end components cool and how easy they are to build a system in.
Subject: Cases and Cooling | June 3, 2017 - 11:16 PM | Tim Verry
Tagged: computex, bitfenix, mid tower, E-ATX Case, RGB LED, gaming, tempered glass
BitFenix had several new PC cases on display at its Computex booth, but the one that caught my eye was the sub-$100 Enso mid-tower that has some premium features including a large tempered glass side panel, RGB LED and fan controllers, removable filters, and various cable management features. The BitFenix Enso has a clean design that out of the box limits the RGB to a nice looking front panel while allowing enthusiasts to go crazy with aftermarket LED strips and LED fans if they wish.
The BitFenix Enso mid-tower (Image credit: KitGuru)
The new Enso chassis measures 8.2" x 19.2" x 14.4" (209 x 487 x 442mm).and is clad in all black with clean lines and edges that strikes a balance between boxy and gaudy (heh). The front is a smooth panel that slightly angles out (no external drive support here) with RGB LEDs in all four corners. The front I/O is up top with two USB 3.0, two audio, and power and reset buttons. The left side is almost entirely comprised of a tempered glass side panel that is held on by black thumbscrews.
The top has a mesh grill with support for two 120mm fans along with a removable magnetic fan filter. There is also room for a 120mm fan in the back and two 120mm fans up front (where there is also a removable filter that pulls out from the left side of the front panel). There is not enough room up top for a water cooling radiator up top, but there is plenty of room for up to a 240mm radiator in the front.
The bottom of the case has a compartment for the bottom mounted up to 220mm power supply (which also has a removable dust filter) and two 3.5” drives along with space to hide excess cables. This area is covered by a simple black shroud that should make cable management easier.
Dropping support for external drive bays and extra 3.5” bays, BitFenix is able to support E-ATX motherboards, long graphics cards (up to 320mm, their demo used an Asus Strix GTX 1080), and water cooling radiators in a compact mid-tower case. BitFenix states it is possible to mount a 360mm radiator in the front, but it the specifications suggest if you would be limited to two fans with matching vents.
Lots of tie downs and space to hide cables! (Image credit: Bitwit Kyle)
The right side panel is blank, and removing it reveals the back of the motherboard tray. There is room for three 2.5” SSDs with one behind the motherboard and two behind the front fans. The motherboard tray has a large CPU cutout, lots of spots to tie up cables, and rubber grommets for passing cables through to the motherboard and graphics card. Having move of the components sitting behind the motherboard tray means that making a clean looking build will be a bit easier (no drive power cables to hide).
The front panel RGB LEDs are “addressable” which is to say that they can be controlled via the controller at the back or via software where BitFenix is working with Asus to allow its RGB LEDs to be controlled with its Aurora software. There is also a fan controller that looks to accept PWM and control 3-pin fans from that signal. The case is also compatible with LED fans and LEDs strips (the BitFenix demo used strips from Asus that could be controlled with the Asus software). As far as the front panel, you can choose a color or activate a gentle pulsing color change mode that cycles through the colors of the rainbow.
(Image credit: Bitwit Kyle)
Out of the box, the BitFenix Enso will have the front panel LEDs and controllers, but users will need to purchase fans and/or LED strips separately. This is not necessarily bad news though because it allows enthusiasts to pick the fans and LEDs they want (or don’t want), and it also allows the case to hit the budget sub-$100 market with lots of nice DIY-friendly features.
According to a BitFenix representative, the BitFenix Enso will arrive around the end of Q3 2017 or towards the beginning of Q4 with an MSRP of $79.
It looks like an impressive budget case, and if they can hit that $79 target it should be a great value that will let you show off your DIY build without breaking the bank! From the videos at Computex, I am really liking the design as well. What are your thoughts?
Subject: Cases and Cooling | June 3, 2017 - 06:01 PM | Tim Verry
Tagged: water cooling, Lian-Li, LCS, copper radiator, copper, computex, cinsys, AIO
Guru3D made an interesting find at Lian-Li's Computex booth this year where they managed to take photos of a new all in one (AIO) liquid cooler that sports an all copper loop. Specifically, the company was showing off a new Lian-Li branded liquid cooler from Cinsys with a 240mm radiator. The "X-R240 Expandable water cooling heat radiating system" features a raw copper radiator surrounded by a metal shroud (reportedly aluminum) that houses 120mm fan mounts and a pump, large removable tubing, and a thin nickel plated copper CPU water block.
Lian-Li X-R240 expandable water cooler. (Image credit: Guru3D)
Looking at the photos from Guru3D, the Lian-Li X-R240 AIO certainly looks classy and should perform fairly well with the copper block and copper radiator (which is nice to see in an AIO where aluminum is common). The large tubing appears to be fairly long enabling the radiator to be placed up to or in the front of a mid-tower case, though I am curious how flexible it will be in a smaller case in tight quarters (if I am remembering my watercooling correctly, the larger diameter should mean it will be less likely to kink though). Further, it looks like the tubing is removable and users will be able to expand the loop to add additional blocks and/or radiators which is nice though you should be careful to avoid adding non-copper (aluminum/silver/ect) components to the Lian-Li loop. Angled and/or swivel barbs on the CPU blocks would have been nice as well since the straight barbs on the thin CPU block could make installation more difficult.
The raw copper is a nice aesthetic touch, though once it is installed in your case and sitting behind fans it is going to be hard to see and Guru3D does note that over time the copper will oxidize and discolor. Still, it might be useful for modders to get that steam punk look and feel. Thankfully it looks like there is plastic (and maybe foam) separating the copper radiator from the aluminum shell/shroud though it's less of an issue since the outside of the radiator isn't going to be submerged in water (hopefully!).
The company will reportedly be releasing other models beyond the 240mm shown at Computex presumably by the same OEM (Cinsys). A 360mm radiator and some GPU blocks would be nice to see! Hopefully Morry or Sebastian can get one in for testing soon!
What are your thoughts on Lian-Li using raw copper? Do you prefer plated copper?
Subject: Cases and Cooling | June 1, 2017 - 10:38 PM | Tim Verry
Tagged: SFX-L, SFF, High Power, computex, be quiet!, 80+ gold
German PSU maker be quiet! Had several new power supplies on display at Computex. Perhaps the most interesting for small form factor enthusiasts are the two new SFX-L power supplies. The aptly named SFX-L-500W and SFX-L-600W are fully modular 80+ Gold rated power supplies that are not much bigger than the 120mm temperature controlled fan that cools it.
SFFNetwork examined the new PSUs at Computex.
According to AnandTech, be quiet! Is using High Power as the OEM for these power supplies rather than its usual partner FSP. The High Power platform offers up a single 12V rail design that supports multi GPU setups with the inclusion of 4 PCI-E power connectors. At least on the 600W variant (not sure on the 500W) the PSU is rated at 50A on the 12-volt rail, which is nice to see. The fan does not support spinning down to zero when under light load, but it does spin down to lower RPMs and has a temperature controlled fan curve that be quiet! claims is sufficient for even noise sensitive applications like HTPCs (hopefully Lee gets his hands on these soon and can confirm the advertised specs).
Both of the new small form factor (SFF) power supplies come with a three-year warranty which seems to be pretty standard for power supplies these days though five would be nice to see especially when they are going to be going into tiny cases with less airflow than the traditional ATX desktop. Speaking of ATX, the SFX-L PSUs come with an adapter that will allow you to install the SFF unit into a standard ATX power supply mount should you want to use it in a larger case.
The 500W and 600W PSUs have US MSRPs of $109 and $129 respectively.
Subject: Cases and Cooling | May 29, 2017 - 05:57 PM | Jeremy Hellstrom
Tagged: thermaltake, Smart Pro RGB, 850W, modular psu
The Smart portion of the Thermaltake Smart Pro RGB seems to refer to the Riing 14 RGB fan that can produce up to 256 colours with five different lighting modes to choose from, and built-in memory to save your light shows. [H]ard|OCP turned the RGB off immediately, then proceeded to test the power the PSU provides, as you would expect. The PSU passed all the tests, but not with flying colours, as some performance measures such as voltage regulation did not match the competitions. On the other hand, if you need RGBs on your PSU then Thermaltake's Smart Pro RGB models are worth your consideration.
"Frag-harder RGB lighting is all the rage, and so of course we are now seeing those in PSUs too. Thermaltake has a healthy 850 watt PSU here for review today that actually hits the sub-$100 mark by 1 cent. Fully modular with great DC output; is there anything not to like? You can turn the RGB off. And a 7 year warranty."
Here are some more Cases & Cooling reviews from around the web:
Subject: Cases and Cooling | May 29, 2017 - 04:21 PM | Jeremy Hellstrom
Tagged: bitfenix, Shogun
BitFenix's Shogun case stands 250x565x525mm in size and allows coolers of up to 175mm in height and GPUs of up to 410mm. It is not the largest case on the market but it is certainly no SFF enclosure, fitting E-ATX motherboards though the tray has mounting points for even mini-ITX if you have a strange idea in mind. The front panel is subtly hidden in the gap between the front bezel and the cases top with enough of a gap you should not have any issues fitting a thumb drive in. Bitfenix gave this metal and glass case high marks for functionality, even if they weren't personally in love with the overall aesthetics.
"The Bitfenix Shogun may not look the part when it comes to its naming, but it does offer a nice and mostly functional feature set coupled with great overall build quality. It also sets itself apart by allowing the user to expand the motherboard tray for an E-ATX board."
Here are some more Cases & Cooling reviews from around the web:
- Fractal Design Focus G ATX @ Kitguru
- Cooler Master Cosmos II 25th Anniversary @ techPowerUp
- Scythe Fuma @ techPowerUp
- ID-Cooling FrostFlow 240L AIO @ Kitguru
- Noctua NH-D15 SE-AM4 120mm U-Type Tower Heatsink Review @ Hardware Asylum
- FSP Windale 6 Cooler @ Kitguru
Computex 2017: RIOTORO Announces CR500 Tempered Glass, CR1288 Prism RGB Full-Tower, and CR1088 Mini-Tower Cases
Subject: Cases and Cooling | May 29, 2017 - 01:27 AM | Scott Michaud
Tagged: riotoro, RGB
We first heard about RIOTORO at the CES before last, where they launched their CR1280 Prism case with its RGB lighting. They’ve since added quite a few models across different product segments.
Now, at Computex, they’re introducing three new models: the CR1288, the CR1088, and the CR500. The first two build upon existing products, while the last occupies a new segment for the company.
I’ll start with the CR1288 Prism, which fills a similar role as their aforementioned CR1280 Prism. It’s unclear whether this will replace that case, or whether they will both co-exist. Either way, RIOTORO claims that it has better cooling, noise reduction, and access for installation than its predecessor. It also looks quite different from the front, with a big, vertical stripe up the center of that side. It retains the CR1280 Prism’s front panel controls.
The CR1288 Prism Full-Tower
The CR1288 Prism is listed as a Q3 launch with a $159.99 USD expected street price.
Next is the CR1088 “Ultra-Compact Tower Case”. Like the CR1288, this is a redesign of the CR1080, although it’s unclear whether they will co-exist. This case is a little larger than a cubic foot, 15.7” long x 9” wide x 14.1” high, but supports a full-sized ATX motherboards and graphics cards. The design routes air across the typical hot spots, and it separates the power supply and drives (2x 3.5” and 3x 2.5”) into its own compartment, with cable routing for cable management.
The CR1088 Mini-Tower
The CR1088 is listed as a Q3 launch with an $89.99 USD expected street price.
Last is the CR500, which definitely does not replace any existing model. This is a lower-cost mid-tower with a tempered glass window, a separate compartment (which I’m guessing is for the power supply and drives, like the CR1288), and tool-free installation (with cable management). It’s made out of steel, and can mount up to a 240mm radiator.
The CR500 Mid-Tower
The CR500 is listed as a Q3 launch with a $79.99 USD expected street price. RIOTORO says that it will have a $69.99 USD introductory price, but it’s unclear what that means (ex: if it’s a pre-order, and from who).
Subject: Cases and Cooling | May 24, 2017 - 01:44 PM | Jeremy Hellstrom
Tagged: fractal design, Focus G, Focus G Mini
Fractal Design launched two new cases for those who want a good looking case and value a good deal. The Focus G is a full sized ATX case, available in black, white, petrol blue, mystic red, and gunmetal gray while the Focus G Mini is black and intended for SFF builds using an ITX or mATX motherboard. Both the cases will retail for $50US and ship with a pair of 120mm Silent Series LED fans, with a total of six mounting points for fans or radiators.
The case is large enough to hold coolers of up to 165mm in height and GPUs up to 380mm long. They have also designed it to give you 25mm of space behind the motherboard tray to make it easier to hide your cabling. Check out the full PR below the specifications.
Sweden, May 24, 2017 – The new Focus G series from Fractal Design is the cornerstone for your PC build, showcasing the hardware aesthetics at the heart of your system with elegant accents and sophisticated style.
Contemporary ATX (Focus G) and Micro ATX (Focus G Mini) case designs accommodates high-performance components with smart and efficient space utilization for a compact footprint.
Extensive cooling options are available with support for tall CPU heatsink/fan combos and water cooling with multiple radiator configurations.
Filtered front, top and base air intakes maintain a dust-free environment while expert cable management options keep wiring tidy. With edge-to-edge visibility, clean contemporary styling and two Silent Series LED fans, the Focus G series makes your hardware the center of attention.
Key features of the Focus G Series
• Two preinstalled Fractal Design Silent Series LL 120mm White LED fans • Focus G available in Black, White, Petrol Blue, Mystic Red, and Gunmetal Gray • Focus G Mini available in Black • Large windowed side panel • Six total fan positions for high-airflow capability • Filtered front, top and base air intakes for a dust free interior • Support for high-profile CPU coolers and multiple radiator configurations • 18 - 25 mm of space for cable routing behind the motherboard plate • Support for graphics cards up to 380 mm long without compromising hard drive space • Two vibration dampened universal drive bays with support for 6TB+ HDDs and 15mm SSDs, plus an additional 2.5" mount behind the motherboard tray.
Subject: Cases and Cooling | May 23, 2017 - 06:27 PM | Jeremy Hellstrom
Tagged: corsair, Commander PRO, Lighting Node PRO, HD140 RGB Fans
Corsair have announced several new products today; the Commander PRO, Lighting Node PRO and HD140 RGB fans. The Commander PRO is Corsair Link compatible fan controller with some extra tricks up its sleeve. Not only does it offer six fan connectors, there are a pair of internal USB ports, as well as two RGB connectors for LED lighting strips and four temperature control inputs. Combine this with the CORSAIR LINK Dashboard and you can keep tabs on everything from coolant temperatures to fan speeds.
Next up are the CORSAIR Lighting Node PRO strips, which you would connect to the Commander or to any USB 2.0 port. These strangely familiar lighting strips can be installed in your machine and individually controlled to provide a programmable light show inside your case. You can attach them via mounting tape backings or magnets and they are full of all the RGBs you could dream of.
Last, but not least are the HD140 RGB fans, which as you have no doubt already determined, are 140mm fans each with a dozen RGB LEDs. The HD indicates these are high static pressure fans suitable for use on a radiator or for air cooling. They can be connected to the Lighting Node PRO for complete control or you can use the built in modes for simple lighting.
Can you handle another full PR or would you prefer a video ...
FREMONT, CA –May 23rd, 2017 - CORSAIR®, a world leader in enthusiast memory, high-performance gaming hardware and PC components today announced the launch of the Commander PRO and Lighting Node PRO fan and lighting controllers, alongside the new HD140 RGB series of RGB cooling fans.
Controlled by CORSAIR LINK software, Commander PRO is the ultimate in system control, providing complete command of up to six 4-pin PWM fans, two RGB lighting channels, four temperature sensors and two USB 2.0 headers.
Lighting Node PRO lights up your PC like never before, with two CORSAIR LINK controlled RGB lighting channels and four included individually addressable RGB LED light strips, each equipped with ten RGB LEDs for brilliant, customizable, system illumination.
Finally, HD140 RGB joins the award-winning range of CORSAIR RGB cooling fans. Each 140mm fan boasts twelve vibrant, individually addressable LEDs, software controllable in CORSAIR LINK using either Commander PRO or Lighting Node PRO.
Providing total control of your PC’s cooling and lighting, Commander PRO, Lighting Node PRO and HD140 RGB combine with CORSAIR LINK to put you in command.
Offering the ultimate in CORSAIR LINK system control, Commander PRO has everything you need to take complete control of your PC’s cooling, monitoring, and lighting. Six 4-pin PWM fan headers provide total control of your cooling fans, from dead-stop to maximum speed, and anywhere in-between, using programmable fan curves in CORSAIR LINK. Two RGB lighting channels give instant RGB control of compatible CORSAIR RGB fans (up to six fans per channel) or CORSAIR RGB lighting strips (fours strips per channel).
Commander PRO also boasts four included thermistor inputs to provide additional temperature data from anywhere in your system, allowing fan speeds and lighting effects to respond to rising temperatures automatically. With the wealth of CORSAIR LINK enabled products from AXi, HXi, and RMi PSUs to CORSAIR Hydro Series liquid CPU coolers, Commander PRO offers a simple way to connect them, thanks to its pair of internal USB 2.0 headers. This frees up space on the motherboard and reduces cable clutter in your system.
Combining all the functions of a fan controller, lighting controller, temperature probe and internal USB 2.0 hub into a single CORSAIR LINK controlled device, you only need one Commander PRO for total control.
Lighting Node PRO
Lighting Node PRO provides vivid lighting effects and custom color combinations for up to twelve CORSAIR SP RGB or HD RGB fans (six per channel) or eight CORSAIR RGB Lighting strips (four per channel). The ideal addition to a CORSAIR Crystal Series 460X or 570X case, Lighting Node PRO lets you take complete software control of your case’s RGB fans in CORSAIR LINK, granting access to a host of new lighting options, from smooth transitions to adaptive lighting that reacts to component temperatures. Included with Lighting Node PRO are four individually addressable RGB LED lighting strips, each equipped with ten ultra-bright RGB LEDs ready to light up your system. Each strip includes an extension cable for easy routing and placement inside your case, while integrated magnetic mounts in each strip make them easy to install. With everything you need to bring CORSAIR LINK controlled RGB lighting to your PC, Lighting Node PRO makes it easier than ever before to light up your PC your way.
HD140 RGB Fans
Joining the award-winning HD series of RGB cooling fans, HD140 RGB combines increased airflow with twelve individually addressable LEDs for 360° of RGB every time you turn on your PC. Equipped with a low-noise hydraulic bearing and ultra-thin fan blades, HD140 RGB fans might draw attention for their looks, but not their noise, and with 4-pin PWM control, it’s simple to customize performance using Commander PRO or any 4-pin fan header. Including an easy-access 3-button controller to cycle through vivid animation presets, HD140 RGB comes to life when connected to a Commander PRO or Lighting Node PRO, unlocking nearly endless customization and lighting effects. Available as a single, or twin-pack, HD140 RGB lets you go big on fans, and bold on lighting.
Availability, Warranty and Pricing:
The CORSAIR Commander PRO, Lighting Node PRO and HD140 RGB series of fans are available immediately from the CORSAIR worldwide network of authorized retailers and distributors. All three products are backed by a two-year warranty and the CORSAIR worldwide customer support network. For up-to-date pricing, please refer to the links below or contact your local CORSAIR sales or PR representative.
Subject: Cases and Cooling, Shows and Expos | May 23, 2017 - 03:28 PM | Jeremy Hellstrom
Tagged: FSP Group, water cooling, modular psu, Hydro PTM+, 80 Plus Platinum PSU, kilowatt, computex
FSP will be showing off several new products at Computex but the most interesting, by far, is a watercooled PSU called the Hydro PTM+. Under normal operations this is a 1200W modular PSU with an 80 PLUS Platinum rating, but include it in a cooling loop and it will provide up to 1400W of power. It can also be run silently up to 50% load, so if you only need ~600W this might still be of use if you are attempting a silent build and yes, there are LEDs on the PSU. Hopefully we can see some more revealing pictures from Computex with the internal layout exposed.
They will also be showing off the world's smallest 850W PSU, the 80 Plus Platinum certified FLEX as well as a not so petite 1600W 80 Plus Platinum PSU for servers and the more extreme of us. Along with those PSUs they are introducing the The ERK, or Easy Redundant Kit, which allows you to hook up two independent PSUs which don't normally support redundancy and rely on them just as if they were. Check out the full PR below.
May 23, Taipei, Taiwan – FSP, one of the leading manufacturers of power supplies in the world is pleased to unveil its focus on delivering continued performance at Computex 2017. FSP’s new power and gaming solutions were developed in cooperation with industry partners, and in the IoT world, the keywords Smart and Inter-operability are reflected in the IoT products on display allow customers to take control from anywhere in the world. Also, Computex gives a look at how FSP’s unique redundancy solutions can create products that can span various segments with customer focus in mind.
FSP introduces the new Hydro PTM+ liquid cooled PSU.
The Hydro PTM+ is a unique, and patented liquid cooled PSU created in cooperation with Bitspower, a renowned creator of liquid cooling solutions for PCs, to meet the highest security and safety standards. The Hydro PTM+ is the world's first mass produced liquid cooled PSU with 80 Plus Platinum certificated, with gorgeous LED lighting it combines great looks with amazing performance. The unique liquid cooling system, once enabled, increases the power rating from 1200W to 1400W. But, with an array of integrated sensors, the Hydro PTM+ also excels at efficiency, when running in silent mode (below 50% load) it still delivers 600W without the use of a fan for cooling, and thus it remains in complete silence.
FSP industrial solutions, powering the smart world.
With the industry focus rapidly shifting to IoT, FSP is on the forefront of working with advanced industry partners to provide power products that integrate easily into a wide range of smart IoT solutions. With Big Data a key for IoT energy management, FSP is ahead of the curve by providing power supplies with PoE, PMBus, and USB communication interfaces that help collect vital data such as fan speeds, wattage, voltage, current, alert and load status.
This data helps manage and size solutions and increase up-time and productivity, especially in iFactory, smart manufacturing solutions, intelligent logistics, and smart transportation.
World Smallest 80 Plus Platinum 850W FLEX PSU
Another great innovation by FSP is the world smallest 80 Plus Platinum certified 850W FLEX PSU. Also in the IoT solution area, you can find the 1600W 80 Plus Platinum certified Intel CRPS PSU, with Current Sharing and Cold Redundancy for amazing efficiency in the data center. Next to that, are the modular, but full voltage input DIN rail PSUs that can perfectly support a wide variety of IoT devices electrical demands.
Easy redundant kit, a unique approach to redundancy
The ERK, Easy Redundant Kit, is a versatile backup solution for entry-level systems that require 24/7 up-time from their power solution. Differing from traditional and expensive redundancy options, the ERK is a unique external DC-DC module which allows operators to create redundancy by combining two traditional non-redundant PSUs with the ERK. This brilliant product offers the best flexibility when choosing power design solutions.
Subject: Cases and Cooling | May 18, 2017 - 03:11 PM | Jeremy Hellstrom
Tagged: Lian Li, PC-O12, e-atx
Lian Li's new PC-O12 is an interesting case. It bears many similarities to cases currently on the market, with tempered glass windows, cable management features and a separated chamber at the bottom which holds the PSU and drive cages.
The way it differs is obvious when you look at the back panel and alignment of the four expansion slots for graphics cards. They are designed to allow you to mount your GPUs vertically with the use of a 440mm PCI-E 16X Riser cable. This will let you show off the artwork and LEDs on your card and is touted as increasing cooling efficiency. While this will give you a unique looking system it also adds an impressive price tag of $399.99.
You can read the full PR below the specifications.
May 18, 2017, Keelung, Taiwan - Lian-Li Industrial Co. Ltd launches the PC-O12; a compact mid-tower chassis that combines sleek tempered glass panels with strong, but lightweight, steel and aluminum. This new addition to Lian Li’s latest generation O-series chassis range offers unsurpassed style, plus slim design with ample space for a powerful but compact PC build. Thanks to its unique design, it offers space for two vertically placed graphics cards in a separate compartment for gorgeous PC builds.
Tempered glass adds a touch of class
The PC-O12’s flawless tempered glass front and side panels make it a sleek and sophisticated showcase for the latest cutting edge computing technologies. Tempered glass is tough, safe and very durable, providing a ‘fresh from the showroom’ appearance indefinitely. The PC-O12’s alluring black aluminum outer body and panels complete the picture. Internally, a rigid steel frame provides a firm foundation for state of the art features.
Ideal balance of chassis size and features
Despite it’s space-saving format, this mid-tower enclosure offers plenty of room for the most powerful hardware. The 440mm full bandwidth PCI Express 16x riser cable allows flexible vertical graphics card mounting to enhance cooling and to show off the latest graphics technology through the tempered glass side panel. The roomy case interior fits graphics cards up to 340mm long and CPU coolers up to 75mm high.
There’s internal space for up to eight hard disk and SSD drives for terabytes of fast storage capacity. In addition, the newest ultra speedy, powerful external USB 3.1 type C devices are supported, and there are a total of four external USB connectors as standard.
A case with great low-noise cooling performance
With up to five large-format fans, this chassis ensures valuable PC components keep running cool, prolonging life, enhancing performance and reducing noise. There’s space for three 120mm fans at the top of the case, plus two 140mm or 120mm fans at the front. With so many airflow options, users are able to reduce fan speed and reduce noise. In addition, removable mesh dust filters cover the primary fan mounts. The drive cages and PSU mount include rubber vibration dampeners to minimize noise.
Price and Availability
The PC-O12 is now available at Newegg for $399.99 Find detailed specifications for the PC-O12 here
Additional PCI Express riser cables are available at Performance PC starting in June 2017
Subject: Cases and Cooling | May 16, 2017 - 06:05 PM | Jeremy Hellstrom
Tagged: Test Bench, T70-1, PC-T70, open air case, Lian Li, acrylic
Lian Li has designed an open air case with an optional acrylic enclosure to help simulate normal case environs or to protect your components if you build a system you want to showcase. The PC-T70 is primarily designed as a test bench so you can set up a E-ATX, ATX, or Micro-ATX/iTX motherboard and easily swap out components while benchmarking hardware or software. The problem with test benches is one of temperature; most of us set up our systems in enclosed cases and the temperatures experienced will be different than in a case fully exposed to any wafting breeze. Lian Li has overcome this with their optional T70-1, a set of acrylic side pieces and top with mounts for fans or radiators which allow you to simulate a closed case environment when you are reporting on running temperatures.
There is another use for this case which might tempt a different set of users. The case fully exposes your components which makes this a great base to build an impressive mod on, or simply to show off all of those RGB LEDs you paid good money for. The acrylic case ensures that your system cannot be permanently killed by a passing feline as well as providing mounting points for an impressive watercooling setup. You can check out the full PR below the specs and video.
New PC-T70 Test Bench Simulates Any Case Environment Lian Li’s New Modular Bench Transforms for Both Closed-Air and Open-Air Testing
May 16, 2017, Keelung, Taiwan - Lian-Li Industrial Co. Ltd is eager to announce the PC-T70 test bench. After productive collaboration, taking feedback from high-end PC hardware reviewers, Lian Li sought to create a test bench that could both provide unhindered access for enthusiasts who want to rapidly swap hardware, and those who like to use their test benches as a workstation. Lian Li’s latest test bench is its most flexible yet – a sleek, minimal platform for easy hardware swapping, with an optional kit that encloses the bench with radiator mounts and an acrylic cover.
Unobstructed Design for Hardware Swapping
After taking feedback from PC hardware reviewers, Lian Li realized that simplicity was key. The PC-T70 has completely free access, with zero barriers hindering the installation of motherboards and other hardware. Users can even remove the back frame for expansion slots and IO cover if they so choose. Six open pass-throughs are positioned around the motherboard tray to route cables down to the PSU and drive mounts on the floor panel.
Simulate Closed-Air Case Environments for Advanced Testing
With the T70-1 upgrade kit, users can add side panels to the open bench, each mounting two 120mm or 140mm fans or a 240mm or 280mm radiator with removable mesh dust filters. It also includes a back panel, mounting an additional 120mm or 140mm exhaust fan and an acrylic canopy secured by magnetic strips to fully enclose the motherboard compartment, simulating a closed-air environment more representative of regular users – a valuable advantage for hardware reviewers. Every panel is modular and easily taken down, so users can rapidly cycle between closed and open-air setups.
A Bench Built for All Form Factors
The PC-T70 mounts E-ATX, ATX, Micro ATX, and mini ITX motherboards, with eight expansion slots to mount VGA cards as long as 330mm. While enclosed, its CPU cooler clearance is limited to 180mm. The floor panel mounts ATX PSUs as long as 330mm and as many as five 2.5” and one 3.5” drives or one 2.5” and two 3.5” storage drives. Users can also use the floor panel to mount a 360mm radiator, reservoirs, and pumps for custom water cooling loops.
Price and Availability
The PC-T70, including the T70-1 option kit is now available at Newegg for $189.99.
Also available in white.
Subject: Cases and Cooling | May 11, 2017 - 03:32 PM | Jeremy Hellstrom
Tagged: nxzt, Kraken X62, AIO
[H]ard|OCP reviews the largest of the Kraken series from NZXT, the X62. This dual 140mm fan cooler measures 315x143x30mm and weighs just over 1.2kg so make sure your case has the space before purchasing this AiO watercooler. The default setting offers acceptable cooling performance while producing 39.9dBA but with a cooler of this stature the real performance numbers to pay attention to are the full speed numbers. At full speed the cooler surpasses the competition and ends up at the top of the charts albeit with an increase in audibility to 46.9dBA. It will cost you about $160 to pick up the Gold Award winning cooler.
"With today's NZXT Kraken review we step up the performance ladder and review its X62 model AIO CPU Cooler. As NZXT spells out on it website, and it is not modest about it, saying that the new Kraken series "have been redesigned to bring you the greatest experience in liquid cooling, all backed by an industry-leading 6-year warranty."
Here are some more Cases & Cooling reviews from around the web:
- Fractal Design Celsius S36 AIO Review @ Hardware Canucks
- Fractal Design Celsius S24 @ Kitguru
- be quiet! Pure Rock Slim Cooler @ Kitguru
- CoolerMaster MasterBox Lite 5 @ Modders Inc
- Raijintek Metis Plus Aluminium Mini-ITX Chassis @ eTeknix
- Raijintek Thetis Tempered Glass Aluminium Chassis @ eTeknix
Subject: Cases and Cooling | May 5, 2017 - 04:39 PM | Jeremy Hellstrom
Tagged: tempered glass, RGB, crystal 460X, corsair
Both the front and side panel of Corsair's newest case are constructed of tempered glass, giving you an impressive view of the inside of your computer and the RGB LEDs on the cooling fans at the front. At 480x234x512mm (18.9x9.2x20.2") it is a little more compact that other ATX compatible cases but still large enough to accept most components including a variety of radiators for watercoolers. The PSU is located at the bottom, under a cover as are the bay for two 3.5" drives; three SSDs can be installed on the back side of the case. [H]ard|OCP were quite enamoured with this case's looks and performance, and at $140 it is not overly expensive for a case with that much tempered glass. That will leave you some money for the white gloves and glass cleaner you will need!
"What do you do when a window just isn't enough? Corsair believes they have the answer in the Crystal 460X RGB case. The front and side are made of tempered glass giving you the ability to show off your pride and joy. Is it more than just a pretty face? Can the Crystal 460X RGB make a PC enthusiast happy?"
Here are some more Cases & Cooling reviews from around the web:
- Raijintek Asterion Plus Aluminium Case @ Kitguru
- Raijintek Asterion Classic @ techPowerUp
- Anidees AI Crystal Cube Lite @ Benchmark Reviews
- Phanteks Enthoo EVOLV mATX Tempered Glass @ Benchmark Reviews
Subject: Cases and Cooling | May 4, 2017 - 05:49 PM | Jeremy Hellstrom
Tagged: enermax, SFX PSU, 650W, revolution, modular psu, lepa
Perhaps the box looked a little empty when Enermax placed their SFX Revolution PSU into the packaging, so they filled up some of the empty space with a Lepa Boom wireless speaker for you to enjoy while assembling your machine. [H]ard|OCP didn't spend a lot of time reviewing the speaker as they were too busy investigating the first SFX PSU they have encountered from Enermax. Overall this PSU passed every test they tossed at it and the price on the unit is favourably comparable to two 600W units [H] tested previously so if you are building a tiny machine that needs a good amount of juice then this review is worth looking into.
"The small form factor segment has been hot for a while now when it comes to enthusiast PC builders and Enermax is entering the SFX fray today with the Revolution SFX 650W PSU. It touts fanless modes under 30% load, 100% Japanese capacitors, and complete flat flexible cables for easier routing in tight cases."
Here are some more Cases & Cooling reviews from around the web:
Subject: Cases and Cooling | May 2, 2017 - 03:55 PM | Jeremy Hellstrom
Tagged: Kraken X52, nzxt, watercooler
The Kraken X52 is twice the cooler the X42 is, with two 120mm fans on its 240mm radiator and should fit in more cases than the 280mm X62. It is fully RGB'd with a wide gamut of colours to dispaly as well as pulsing and rotating effects if a simple glow doesn't satisfy your cravings. [H]ard|OCP tested it out on a Core i7-4770K with the fans at full speed as well as the minimum possible speed. At full speed it was only a hair short of becoming the most effective cooler they've reviewed but did take the loudest noise produced by a cooler handily. Reducing the speed had an enormous effect on the sound, reducing it to being barely audible but unfortunately the cooling effectiveness also dropped significantly; those who are interested in this cooler should be able to find a happy medium between audibility and cooling performance. The full review is right here.
"NZXT has been stepping up its cooling game this year, and the Kraken X52 All-In-One represents its "in between" liquid CPU cooler model for those cases with somewhat limited space for the radiator. The Kraken X52 comes with a healthy feature set that has most of the bells and whistles that are needed to make it competitive."
Here are some more Cases & Cooling reviews from around the web:
Subject: Cases and Cooling | May 2, 2017 - 01:37 PM | Jeremy Hellstrom
Tagged: corsair, carbide, Carbide SPEC-04
You can see the three exterior styles of the Corsair Carbide SPEC-04 below, a black enclosure with a tinted side panel window and your choice or red, yellow or grey highlights on the front panel.
The front panel design is for more than just show, the depth allows your front fans to be installed between the case body and the front panel, leaving you more room in the interior for components and making it easier to swap the fans. It also leaves enough space that the audio and USB plugs as well as the power buttons can be side mounted.
The case is 492x201x433mm (19.4x7.9x17") in size, and the interior of the case can hold GPUs of up to 370mm in length with ease. There is space for three 3.5" HDDs and two 2.5" SDDs and enough cutouts to ensure even fully populated you will not have cable clutter showing through the side panel. The front panel allows the installation of two 120/140mm fans, the top can accomodate a pair of 120mm fans, or radiator if you prefer, with one more 120mm fan or radiator on the back.
FREMONT, CA — May 2nd — CORSAIR®, a world leader in enthusiast memory, high-performance gaming hardware and PC components today announced the newest addition to the Carbide series of mid-tower gaming cases, the CORSAIR Carbide Series SPEC-04. With unmistakable styling, a large tinted side panel window and roomy interior, the Carbide Series SPEC-04 is ready-to-build a system as bold as it looks.
With it’s asymmetrical, hard-edged exterior, the SPEC-04 is ready to stand out, with three different color options to match your system, Black and Yellow, Black and Red or Black and Grey. The angular styling isn’t just there for looks, it hides a side-mounted front panel equipped with USB 3.0 and 2.0 ports and a huge ventilated section to provide excellent Direct Airflow Path airflow.
Whichever color you choose, the SPEC-04 offers the performance to back up its looks, with a pre-installed 120mm LED-lit front intake fan and room for up to five fans; two 120mm or 140mm in the front, two 120mm in the roof and one 120mm in the rear. Fill each slot with a CORSAIR AF, SP, ML or HD series 120mm fan for maximum airflow, or fit any 120mm CORSAIR Hydro Series liquid cooler for watercooled performance. What’s more, with both front intake and PSU dust filters, the SPEC-04 is equipped to keep your system clean, as well as cool.
Inside the SPEC-04 is packed with a host of builder-friendly features to make your next gaming PC build as easy as possible. ATX, MATX and mini-ITX motherboard support is accompanied by seven expansion slots and room for GPUs up to 370mm in length, so while you might agonize over that next system upgrade, you won’t have to worry about whether it’ll fit. Expansive storage mounts accommodate up to three 3.5in HDDs and two 2.5in SDD’s, while multiple cable routing cutouts and tie downs make for easy cable management to keep your build looking spacious and uncluttered. Designed to deliver the striking styling, great airflow and wide compatibility of modern gaming PC cases within the reach of any system builder, the CORSAIR Carbide Series SPEC-04 is bold and ready to build.
- Angular exterior design with large, tinted side panel window: The asymmetrical, hard-edged design adds bold styling to your build.
- Room up to for five 120mm fans: Tons of room for excellent cooling potential with one 120mm front fan pre-installed.
- Expansive storage space: Easy-to-use mounts for up to three HDD’s and two SDD’s.
- Clean, side I/O panel: Featuring a high-speed USB 3.0 port and additional ports for all modern connections.
- Cable routing cutouts and tie downs: Hide your cables behind the motherboard tray to keep your build looking tidy and out of the airflow path for improved cooling.
- Removable, built-in dust filters: Added layer of protection will keep your components safe and running longer.
- I/O Port: USB 3.0 port, USB 2.0 port, Headphone and Microphone jacks, Power on and Reset buttons.
- Expansion slots: Seven
- Maximum PSU length: 225mm
- Maximum CPU Cooler Height: 150mm
- Maximum GPU length: 370mm
- Drive bays: 3.5” – Three, 2.5” - Two
- Dimensions (L x W x H): 492 x 201 x 433mm
Subject: Cases and Cooling | April 26, 2017 - 04:53 PM | Jeremy Hellstrom
Tagged: fsp, windale, windale 6, windale 4
FSP have just announced their entrance into the cool world of heatsinks with their Windale series. The Windale 4 sports four heatsinks, and as you may have already guessed the Windale 6 has a half dozen. Both coolers have a 120mm fan rated at 60CFM at the full 1600RPM, as it is PWM you can reduce that down to 600RPM if you prefer a little silence. The two models are compatible with any modern Intel or AMD processor, Ryzen included.
The Windale 4 is 122x83x158mm so you will be able to squeeze it into any chasis which will fit a 120mm fan comfortably. It is rated for processors of up to 180W TDP so even with its smaller size you will still have good cooling potential.
The Windale 6 is the wider of the two, with the size increased to 122x110x165mm to accommodate the additional two heatpipes which increase the cooling potential to an impressive 240W TDP which should please overclockers.
We don't have any pricing or test units yet, but we do have PR you can read below.
April 26, Taipei, Taiwan – Global power and cooling specialist, FSP, is pleased to announce the new Windale series of supremely effective, ultra-quiet, heat pipe equipped fan-cooled PC heatsinks. The Windale 6 (AC601) and Windale 4 (AC401) bring a combination of extreme cooling performance with very low noise and vibration to a huge range of Intel and AMD CPUs – including the newest Core i7 and Ryzen processors. These new PC coolers are ideal for gamers, performance enthusiasts, and overclockers, as well as for general users who need quiet, reliable cooling and long CPU life.
FSP patented technology for ultimate cooling performance
Both the Windale 4 and Windale 6 feature CPU direct contact technology to remove heat from the CPU with maximum efficiency, protecting the valuable CPU and extending its lifespan. As their names suggest, the Windale coolers feature four and six heat pipes respectively, to spread that heat through the cooling fins. These louver fins are assembled with a patented solder-less technique which ensures unhindered heat transfer, unlike traditional soldered fins. Finally, the large, quiet 120mm cooling fan drives up to 60 cubic feet per minute (CFM) of air through the fins to dissipate the heat and keep the CPU running safely at optimum speed.
These advanced design and manufacturing features allow the Windale 4 to achieve a thermal design power (TDP) of 180W and thermal resistance of 0.11° C/W, while the larger Windale 6 reaches a TDP of 240W TDP and brings thermal resistance down to only 0.09° C/W in the most demanding scenarios. This allows the Windale series to keep CPU temperatures well below those provided by competing CPU coolers.
The quiet fan that cools and looks cool
Designed with a focus on noise reduction and user comfort, the Windale’s optimized low-noise sleeve bearing PWM fan spins at a low speed, variable from 1600 RPM down to only 1000 RPM to provide almost silent operation, but its wide 120 mm size ensures the fan blades can move more than enough air to keep the hottest CPUs running safely. The heatsink’s anti-vibration rubber mounting pins help isolate it from the motherboard and chassis to prevent noise and vibration.
Despite its unobtrusive and quiet performance, a Windale cooler can still be an eye-catching feature of any PC, thanks to its sleek, stylish design. The Windale 4 exposes the natural metallic sheen of its aluminum alloy fins and copper heat pipes, while the Windale 6 sports a cool black plated exterior coating and features an alluring blue LED effect.
Supports a wide range of AMD and Intel CPUs
The FSP Windale series offers outstanding compatibility with a huge range of CPU sockets, including Intel’s Socket LGA 775, 1150, 1155, 1156, 1366, and 2011, and AMD’s socket FM1, FM2, FM2+, AM2, AM2+, AM3, AM3+, and AM4. CPUs supported by these sockets include the latest Intel Core i3, i5 and i7 CPUs, and AMD Ryzen – as well as many other Intel and AMD CPUs.
Subject: Cases and Cooling | April 21, 2017 - 03:15 PM | Jeremy Hellstrom
Tagged: XL-ATX, e-atx, dark base pro 900, Dark Base 900, be quiet!
The be quiet! Dark Base Pro 900 is impressively large, standing 577x243x585mm (22.7x9.6x23"), supporting even the largest of motherboard model. That size also allows for some impressive cooling options, radiators of up to 420mm in length can be installed in both the front and top of the case. The case ships with three be quiet! SilentWings 3 fans installed, for those who opt to forego watercooling and it is also worth mentioning the filter on the bottom of the case slides out from the front. The side panel is made of tempered glass on the $250 Pro model, the non-Pro has a steel side panel which reduces its cost to $200 and both feature a Qi wireless charging area. Drop by Modders-Inc for a closer look.
"When it comes to system building, size equals convenience with large full-tower cases offering plenty of room to work with. Since the case market is extremely crowded and competitive however, simply creating a large case for the sake of creating a large case is not enough. If it does not have the right set of features and is not designed …"
Here are some more Cases & Cooling reviews from around the web:
- Game Max Onyx RGB Tempered Glass Mid-Tower @ eTeknix
- Riotoro CR480 Gaming Case @ Benchmark Reviews
- Be quiet! Dark Base Pro 900 XL-ATX Mid-Tower @ NikKTech
- Cooler Master MasterBox 5t Review @ Bjorn3d
- Bitspower Summit EF-X CPU Waterblock @ techPowerUp
- X2 i5 @ techPowerUp
- Raijintek Pallas Low-Profile CPU Cooler @ Kitguru
- Cooler Master MasterAir Pro 3 and MasterAir Pro 4 @ Kitguru
- Cooler Master MasterAir Pro 3 and 4 CPU Cooler @ eTeknix
- ThermalTake Riing Silent 12 Pro Cooler @ Kitguru
Subject: Cases and Cooling | April 6, 2017 - 01:41 PM | Jeremy Hellstrom
Tagged: corsair, crystal 460X, tempered glass, RGB
The Corsair Crystal 460X RGB is described as a compact ATX case, at 440x220x464mm it is less deep than many ATX cases thanks to the complete lack of a standard drive cage. It will still fit two 3.5″ drives and three 2.5″ drives hidden away on the back of the case or in line with the bottom mounted PSU. The front and side panel are tempered glass to show of the glow of your internal components and the front fans sport LEDs which can be controlled with the six fan lighting hub.
"If there are two big trends in computer accessories and peripherals these days, it’s “tempered glass” and “RGB illumination”. And if you can combine the two, as Corsair has done with the Crystal 460X RGB Compact ATX mid-tower case, so much the better!"
Here are some more Cases & Cooling reviews from around the web:
- DeepCool GENOME II @ Modders-Inc
- Be Quiet! Pure Base 600 Window Mid-Tower Review @ NikKTech
- Tesseract SW by DeepCool @ Modders-Inc
- BitFenix Shogun E-ATX @ Benchmark Reviews
- Cooler Master MasterCase Pro 6 @ Modders-Inc
- Alphacool EISWAND 360 External Water Cooling Kit Review @ NikKTech
- Thermalright True Spirit 140 Direct @ techPowerUp