CES 2018: Mushkin Launches New M.2 NVMe SSDs
Subject: Storage | January 10, 2018 - 07:24 PM | Tim Verry
Tagged: Mushkin, silicon motion, SM2262, SM2263XT, 3d nand, tlc, M.2, NVMe, CES, CES 2018
Mushkin is on site at CES where it is launching a slew of new products. On the storage front, Mushkin is showing off three new M.2 2280 form factor NVMe solid state drives aimed at various price points. The Pilot, Pilot-E, and Helix-L M.2 drives all use Silicon Motion controllers and 3D TLC NAND flash memory. Mushkin further advertises them with a three-year warranty and the company's MEDS Reliability Suite which includes technology to enable end-to-end data path protection, LDPC ECC, and global wear leveling algorithms to ensure data integrity and longevity.
At the top end of performance is the Pilot-E M.2 SSD based on SM2262EN controller which offers up eight channels for connecting all the 3D NAND. This 250 GB to 2 TB drive is able to achieve extremely speedy 3.5 GB/s sequential reads and 3.0 GB/s sequential writes along with 370K read IOPS and 300K write IOPS. Essentially, the Pilot-E M.2 should be able to easily max out the PCI-E x4 connection with the right workloads.
Stepping down a bit, the Pilot drive uses an eight channel SM2262 controller. This drive gets close to the Pilot-E in reads, but has much lower sequential write performance. Capacities for this SSD range from 120 GB to 2 TB. Specifically, the Pilot SSD is rated at 3.2 GB/s sequential reads, 1.9 GB/s sequential writes, 370K random read IOPS, and 300K random write IOPS. This drive should be cheaper than the Pilot-E and will be aimed at the consumer space where reads are more important than writes.
Finally, Mushkin's Helix-L is a lower cost SSD that uses a DRAM-less design to reduce cost as well as a cheaper four channel SM2263XT controller. Capacities range from 120 GB to 1TB. This SSD supports Host Memory Buffer architecture which allows it to use system memory as a cache to improve performance. The Helix-L is rated at 2.4 GB/s sequential reads, 1.7 GB/s sequential writes, 280K random read IOPS (140K without HMB) and 250K random write IOPS.
Mushkin has not yet revealed pricing or availability on its new NVMe 1.3 drives. You can read more about the Silicon Motion controllers used here.