All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Storage, Shows and Expos | January 10, 2018 - 07:38 PM | Allyn Malventano
Tagged: tlc, ssd, slc, sata, nand, MX500, DWA, crucial, CES 2018, CES, 3d nand
Crucial showed off the upcoming M.2 variant of its MX500 product, available in capacities up to 1TB. They also announced (press release after the break) that the MX500 will be available from 250GB up to 2TB capacities.
Here is Crucial's product tour video for the MX500:
We previously tested the 1TB MX500, and Crucial passed along a 500GB model that I was able to spot check to ensure there was no performance fall-off at the smaller capacities of this line:
Looks good so far, and nearly identical to the 1TB capacity across our entire test suite. We did also speak with Crucial reps (Jon and Jon) about the TRIM speed issues noted in our previous review. They are looking into replicating our testing and may be pushing out a firmware to help improve this metric moving forward.
We also saw some sweet looking new RGB Ballistix memory, due out shortly. More to follow there! Crucial's MX500 CES announcement appears after the break.
Subject: Storage, Shows and Expos | January 9, 2018 - 07:32 PM | Allyn Malventano
Tagged: XPoint, Optane, Intel, CES 2018, CES, 800p, 60GB, 3D XPoint, 120gb
Intel broke news just now that they will be launching a larger version of their 16/32GB Optane Memory modules. The new 800P looks very much the same as its little brother but is designed to operate as a sole boot SSD. Mobile applications are also possible now as the 800P includes power management features that the Optane Memory modules lacked (as they were not intended for mobile).
We are under embargo as far as performance goes, but from what we know about how Optane parts scale, it's a safe bet that performance will be very close to what we've seen out of the Optane Memory parts. Warranty will be 5 years with an endurance of ~200GB per day. No word on cost at this time. Overall these though fit nicely between Optane Memory (16/32GB) and the 900P (280/480+GB) capacity points.
The elephant in the room is the capacity. While these can store more than the 16/32GB variants, 60/120GB may not be enough for most users out there. Fortunately, devices like these are great in Zx70 RAID or even VROC configurations!
Subject: Storage, Shows and Expos | January 8, 2018 - 03:04 PM | Allyn Malventano
Tagged: XS700, toshiba, ssd, RC100, portable, ocz, NVMe, CES 2018, CES
Toshiba announced a couple of new additions to their SSD lineup. First up is the RC100:
This is a DRAMless design intended to target budget builds - something much needed in the current (pricey) SSD landscape. Just because there is no DRAM present in the design does not mean that the RC100 can't perform well. Toshiba has implemented the Host memory Buffer (HMB) feature, which allows the NVMe driver to share a small (38MB) portion of host memory via the same PCIe 3.0 x2 link used to transfer user data. This memory portion effectively caches a portion of the FTL, which should bring the random performance of smaller sections of the SSD up to what you would expect to see from a higher performance product. Specs are as follows:
- Capacities: 120/240/480GB
- PCIe 3.0 x2
- Random read/write: 160/120k IOPS
- Sequential read/write: 1620/1130 MB/s
- Warranty: 3 years
Up next is the XS700, Toshiba's first portable SSD:
- 240GB only
- USB 3.1 Gen2 (type-c connector on device)
- Ships with type-c to type-a cable
The XS700 is the first portable SSD I've seen out of Toshiba. It was just a matter of time here as just about every other major SSD maker has offered a similar product.
We don't have pricing yet, but these should shape up to be highly price-competitive products offering decent performance. Both models will be coming later this year.
Press blast after the break.
Qualcomm Showcasing Windows on Snapdragon and Snapdragon 845 Mobile Platform on Tech Summit Live Stream
Subject: Mobile, Shows and Expos | December 4, 2017 - 01:50 AM | Ryan Shrout
Tagged: windows on snapdragon, snapdragon 845, snapdragon, qualcomm, live stream
Qualcomm is preparing for its second annual Technology Summit, this time from the sunny shores of Maui, where it will unveil the roadmap and technologies that it will be driving into the ecosystem for 2018. Hosted by EVP of Qualcomm Technologies Cristiano Amon, this event will play host to not just Qualcomm personnel but several other key leaders in the hardware and software industry, backing Qualcomm’s play into flagship mobile, Windows, and more.
The PC Perspective team is on-site to cover the announcements, interview executives, and attempt to gauge the potential for this technology being presented. If you want to follow along at home, Qualcomm is hosting a live stream of the event on its website and of course will be tweeting all of the key details from its primary account. It starts bright and early at 8:30am HST in Hawaii but that translates into 10:30am PST and 1:30pm EST for those of you on the mainland.
There are definite announcements coming that you should expect during the live stream. First, Qualcomm will be updating its flagship mobile platform to the Snapdragon 845, a potentially significant bump over the 835 shipping today. We have already seen rumors of several next-gen Android smartphones using the SD 845 including Samsung’s Galaxy S9. The company announced the SD 835 and corresponding technology in November of 2016 at the first Tech Summit, so expect Qualcomm to follow suit for the SD 845 this year.
More exciting to many might be the pending release of the much-hyped Windows on Snapdragon hardware. We have been talking about it for more than a year now, but we have it on high authority that we are past theory and will be seeing real hardware from real vendors with real prices and real time tables. These Windows 10-based notebooks and convertibles should include Gigabit-class LTE, extended battery life, and a true Windows 10 experience. But details up to this point have been sparse – hopefully this week we’ll have much more definitive information in our hands.
That’s all I can say for sure we’ll see at the Qualcomm Tech Summit, but who knows, the company may have some more surprises in store for us. The company has a lot of technology in development in areas like self-driving cars, mobile connectivity, IoT, VR; any of which could make for an interesting addition to our pre-CES flurry.
Subject: Mobile, Shows and Expos | August 28, 2017 - 10:20 PM | Ken Addison
Tagged: ifa, IFA 2017, dell, XPS 13, 8th generation core, i7-8550U, i5-8250U
As expected, this year's IFA trade show in Berlin is proving busy for notebook manufacturers. Hot on the heels of Intel's announcement of 15W 8th Generation quad-core processors in the Kaby-Lake refresh family earlier in the month, we are starting to see some announcements of actual products utilizing these new processors.
Not to be left behind, Dell has officially announced the refreshed version of their well-received XPS 13 notebook.
It appears that there has been little physical change to the XPS 13 centered around these new processor options. Customers will still find 2 USB-A Ports upgraded to USB 3.1 Gen 2, a Thundebolt 3 Port, full-size SD card slot, a standard headphone jack, and a power connector (although charging over Thunderbolt 3 is supported). There's no indication yet as to the Thunderbolt 3 implementation, but we hope Dell has gone with the full PCIe x4 bandwidth instead of x2 as found on the current XPS 13.
Same as the current XPS 13, customers will be able to choose from a 1080p non-touch display or a 3200x1800 touchscreen, up to 16GB of RAM, and SSD options including SATA and NVMe.
Battery size remains at 60Wh, which Dell claims has a MobileMark battery life score of 22 hours on the 1080p display model and 12 hours with the 3200x1800 QHD+ Touchscreen option.
Expect a longer rollout than usual with these new 8th generation parts from Dell, with the highest end i7-8550U to be available starting September 12th, and the i5 parts coming later in October. We have no current indications of pricing, but I would expect it to fall along the current XPS 13 models, in which the i7 model starts at $1349 along with 8GB of RAM, a 256GB NVMe SSD, and the 1080p display.
Subject: Storage, Shows and Expos | August 9, 2017 - 09:19 PM | Allyn Malventano
Tagged: FMS 2017, ssd, S4600, S4500, ruler, pcie, NVMe, Intel, EDSFF
Yesterday we saw Samsung introduce their 'NGSFF' form factor during yesterday's keynote. Intel has been at work on a similar standard, this one named EDSFF (Enterprise & Datacenter Storage Form Factor), with the simpler working name as 'Ruler', mainly because it bears a resemblance:
Note that the etching states P4500 Series. P4500 was launched a couple of days ago and is Intel's next generation NVMe PCIe Datacenter SSD. It's available in the typical form factors (U.2, HHHL), but this new Ruler form factor contains the exact same 12 channel controller and flash counts, only arranged differently.
SFF-TA-1002 connector (aka 'Gen-Z'), shown next to an AA battery for scale. This connector spec is electrically rated for speeds up to 4th and 5th generation PCIe, so future proofing was definitely a consideration here. In short, this is a beefed up M.2 style connector that can handle more throughput and also has a few additional pins to support remote power and power-loss-protection (capacitors outside the Ruler), as well as support for activity LEDs, etc.
Here is a slide showing the layout of the Ruler. 36 flash packages can be installed, with the possibility of pushing that figure to 42.
Thermals were a main consideration in the design, and the increased surface area compared to U.2 designs (with stacked PCBs) make for far cooler operation.
Intel's play here is fitting as much flash as possible into a 1U chassis. 1PB in a 1U is definitely a bold claim, but absolutely doable in the near future.
I'll leave you with the quick sniper shot I grabbed of their demo system. I'll be posting more details on the P4500 and P4600 series products later this week (remember, same guts as the Ruler), so stay tuned!
Subject: Storage, Shows and Expos | August 8, 2017 - 05:37 PM | Allyn Malventano
Tagged: z-ssd, vnand, V-NAND, Samsung, QLC, FMS 2017, 64-Layer, 3d, 32TB, 1Tbit
As is typically the case for Flash Memory Summit, the Samsung keynote was chock full of goodies:
Samsung kicked off by stating there are a good 5 years of revisions left in store for their V-NAND line, each with a corresponding increase in speed and capacity.
While V-NAND V4 was 64-layer TLC, V5 is a move to QLC, bringing per die capacity to 1Tbit (128 GB per die).
If you were to stack 32 of these new V5 dies per package, and do so in a large enough 2.5" housing, that brings the maximum capacity of such a device to a whopping 128TB!
Samsung also discussed a V2 of their Z-NAND, moving from SLC to MLC while only adding 2-3 us of latency per request. Z-NAND is basically a quicker version of NAND flash designed to compete with 3D XPoint.
M.2 SSDs started life with the working title of NGFF. Fed up with the limitations of this client-intended form factor for the enterprise, Samsung is pushing a slightly larger NGSFF form factor that supports higher capacities per device. Samsung claimed a PM983 NGSFF SSD will hold 16TB, a 1U chassis full of the same 576TB, and a 2U chassis pushing that figure to 1.15PB.
Last up is 'Key Value'. This approach allows the flash to be accessed more directly by the application layer, enabling more efficient use of the flash and therefore higher overall performance.
There were more points brought up that we will be covering later on, but for now here is the full press release that went out during the keynote: (after the break)
Subject: Storage, Shows and Expos | August 8, 2017 - 12:02 PM | Allyn Malventano
Tagged: U.2, pcie, NVMe, micron, HHHL, FMS 2017, 9200, 3d nand
We were extremely impressed with the Micron 9100 Enterprise SSDs. They are still the fastest NAND flash SSDs we've tested to date, but they were built on planar NAND, and we know everyone is replacing their flat flash with more cost efficient 3D NAND. Same goes for the 9200:
Highlights for the new models are IMFT 3D NAND running in TLC mode and a new controller capable of PCIe 3.0 x8 (HHHL form factor only - U.2 is only a x4 interface). Here are the detailed specs:
Improvements for the x4 models are marginal upgrades over the 9100, but the x8 variants bump up the maximum performance to 900,000 IOPS and 5.5GB/s! These should be shipping by the end of the month, and we will review them as they come in.
Subject: General Tech, Shows and Expos | June 12, 2017 - 12:19 PM | Jeremy Hellstrom
Tagged: ssd, sata, NVMe, M.2, computex 2017, adta
Adata had a flashy booth at Computex, focusing on their upcoming storage and memory products which The Tech Report spent some time at. They had quite a lineup to show off, a pair of Enterprise class NVMe M.2 drives, the IM2P33E8 powered by Silicon Motion's upcoming SM2262 controller which is reputed to hit 3000 MB/s read, 1500 MB/s write as well as the SATA IM2S33D8 using the SM2259 controller.
For high end users there are the NVMe XPG SX9000, XPG SX8000 and XPG SX7000, the former with a Marvell controller and Toshiba's evergreen 15-nm MLC NAND, the latter pair with a Silicon Motion controller and IMFT 3D MLC flash. For the price sensitive they have launched an M.2 drive which only uses two PCIe lanes, it will not be as the high end drives but should leave a HDD or older SSD in the dirt.
As for what is below? Why that is an XPG Spectrix S10 drive which is the world's first RGB infected SSD.
"Without high-end motherboards or funky case concepts to show off, Adata focused its Computex presence on its strong point: storage. Join us as we walk through the company's upcoming SSD offerings."
Here is some more Tech News from around the web:
- The AMD Vega Memory Architecture Q&A With Jeffrey Cheng @ TechARP
- Researchers find super flaw in Virgin Media Super Hub routers @ The Inquirer
- Alphabet offloads bot businesses Boston Dynamics and SCHAFT @ The Register
- Microsoft officially hangs up on old Skype phones, users fuming @ The Register
- Windows 10 Creators Update preview: Lovin' for Edge and pen users, nowt much else @ The Register
Subject: Mobile, Shows and Expos | May 31, 2017 - 04:23 PM | Jeremy Hellstrom
Tagged: aorus, AORUS X5 MD, gaming laptop
The GTX 1080 doesn't seem like a mobile card but there are more than a few laptops which have one inside them, including the newly announced AORUS X5 MD. In addition to the expected GPU is an overclocked i7-7820HK processor, thought the exact CPU will depend on the model chosen.
The screen quoted in the PR is a 15.6" 3840x2160 IPS GSYNC panel which has been calibrated with their X-Rite Pantone tool; this is suggested as optional but if you plan on spending the money for a gaming laptop of this calibre it is essentially mandatory. Audio is provided by the ESS Sabre Audio ES9018 DAC with a DNR of up to 135dB.
Outputs include HDMI 2.0 and mDP 1.3 though it is the Thunderbolt 3 port which catches the eye, allowing you to power a 4k monitor with this laptop when you are at home. The casing is a mere 22.9mm tall, a bit thicker than your average deck of cards. The keyboard is full of RGBs for those that prefer visual aids, while phonophobes will like the fact the cooling fans are adjustable to 10 different speeds. Check out the full PR below the specs.
AORUS, leader in high-end gaming laptops, is proud to announce a new version of its 15.6” X5. Pushing the boundaries even further, AORUS has extended the X5 series with the X5 MD, which incorporates the state of the art NVIDIA GeForce GTX 1080 GDDR5X 8GB GPU.
Packed with plenty of new features, such as overclockable 7th Generation Intel Core i7 processor, Thunderbolt 3, ESS SABRE 32-bit Hi-Fi audio DAC specially-designed cooling vents, the X5 MD also utilizes the new Max-Q design, NVIDIA’s innovative approach to design the world’s thinnest, fastest, and quietest gaming laptops. Max-Q, an integral part of NASA’s mission to launch man into space, is defined as the point at which the aerodynamic stress on a rocket in atmospheric flight is maximized. Thus, the design of the rocket is precision-engineered around Max-Q. NVIDIA has applied a similar philosophy to designing gaming laptops, enabling AORUS to build laptops that are thinner with more GPU performance of previous generation products.
“The NVIDIA GeForce GTX 1070 was already fast, then the NVIDIA GeForce GTX 1080 designed with Max-Q came along to satisfy gamers’ demand for even more performance,” commented Patrick Lai, Product Marketing at AORUS. “The X5 MD with GTX 1080 is an absolute beast. Gamers will love it!”
Step Up the Gaming Performance
The unmatched performance is what makes the X5 MD the most powerful 15” gaming laptop. This is the first Max-Q designed laptop from AORUS and is equipped with the NVIDIA GeForce GTX 1080 GPU. Furthermore, AORUS has paired the powerful GPU with the latest overclockable Intel Core i7-7820HK CPUs running at up to an 15% increase when compared to the 7700HQ, the X5 MD has outperformed any 15” laptops. All this power is fitted within the 22.9mm thin chassis through extensive engineering, allowing the X5 MD to provide the best gaming experience.
ESS Sabre Audio DAC – A 32-bit, 8-channel Hi-Fi Sound Experience
Few things are as important to gaming and movies as high-quality, crystal clear sound. Striving to offer the finest sound possible, AORUS has utilized the top of the line ES9018 DAC from ESS, built on its 32-bit Hyperstream architecture. Capable of output to 8 channels, it also boasts a Digital Noise Ratio of up to 135dB and a Total Harmonic Distortion + Noise (THD+N) figure of -120dB.
Thunderbolt 3, mDP 1.3, Multi-Surround Displays
AORUS’ commitment to versatility is evident in the utilization of the Thunderbolt 3 connector in the X5 MD Thunderbolt 3 truly is the USB Type-C connector that does it all – connect to external graphics cards, connect external 4K display, or even charge your external devices with the 3A/5V output. Added with the upgraded mini DP 1.3 port and the existing HDMI 2.0, Multitasking and surround gaming are made possible.
X-Rite Pantone Calibrated Screen Panels
Further emphasizing the versatility of the AORUS X5 MD laptop is the introduction of fully calibrated screen panels, courtesy of revered color system player X-Rite Pantone. With each X5 MD laptop, you can rest assured that your system’s color reproduction will be second to none, whether you’re enjoying it professionally or casually.
Subject: Storage, Shows and Expos | May 31, 2017 - 01:46 PM | Jeremy Hellstrom
Tagged: TS-x77, amd, ryzen, qnap, NAS, computex 2017
QNAP are providing a sneak peak of a new line of NAS devices, powered by AMD's Ryzen processors. The TS-x77 series will come in 6, 8, and 12-bay models with an AMD Ryzen 7 1700 or Ryzen 5 1600 or 1400 processor with up to 8, 16, 32 or 64GB DDR4 RAM dependant on the model.
The devices support RAID 0/1/5/6/10/50/60, RAID 1/5/6/10/50/60 + spare, single and JBOD, which support AES-NI encryption acceleration. Internally there are quite a lot of opportunities to customize your NAS, on all models you will find a pair of M.2 2242/2260/2280/22110 SATA 6 Gb/s SSD slots for your hot storage and depending on the model you will have a mix of 2.5" and dual 2.5/3.5" drive bays for your SSDs or HDDs.
That is not the only possibilities for expansion in these NAS devices, all models contain three PCIe 3.0, one 8x slot and two 4x which you can use for a PCIe SSD, 10GbE or 40GbE network cards or perhaps even a GPU for local transcoding. Externally you have four Gigabit ethernet connectors, two USB 3.1 ports, one Type-C and one Type-A as well as five USB 3.0 ports.
These will not be available until Q3, so we won't be able to review it for a while but rest assured that we are at least as interesting in seeing the performance of Ryzen in a NAS as you are.
Subject: Motherboards, Shows and Expos | May 30, 2017 - 03:58 PM | Jeremy Hellstrom
Tagged: msi, computex, GAMING M7 ACK, GAMING PRO CARBON AC, TOMAHAWK, x299
MSI is launching their X299 motherboard series with a trio of options, the X299 GAMING M7 ACK, GAMING PRO CARBON AC and a new TOMAHAWK motherboard.
The X299 GAMING M7 ACK above is their current flagship model, designed with 10+1+1 phase DigitALL power, Loadline Calibration and MSI’s Turbo Socket which should give you some impressive overclocking ability. The M.2 slots are covered by MSI's Shield FROZR which will keep the drives well within their temperature thresholds ensuring there is no performance hits because of excessive heat. The board also features Killer Double Shot PRO technology, which allows you to combine the two Killer E2500 Ethernet NICs and the Killer 1535 Wi-Fi connections which will be interesting to see in action when we eventually get a chance to test it out.
The GAMING PRO CARBON AC is the pretty boy of the trio, it sports removable heatsinks and is compatible with any of their new X-Mounting accessories; fire up your 3D printer and create your own for a custom look. Along with the interchangeable heatsink covers are MYSTIC LIGHT RGB LEDs spaced around the motherboard to highlight your system in the colours you choose. The board features MSI's Game boost function, a one click overclocking solution to get you gaming as quickly as possible, though you can always disable it and manually tweak your settings. With Turbo U.2 and M.2 slots you can run the latest NVMe drives at full speed, the M.2 sticks will be cooled by the M.2 Shield to ensure you don't see throttling.
The newest incarnation of the TOMAHAWK series is designed to be sturdy, it features stainless steel heatsinks and MSI Steel Armor design; we still wouldn't recommend tossing it around but for a LAN machine you should be confident in transporting your system. This motherboard also features the new M.2 Shield FROZR cooling for your M.2 SSDs the Turbo U.2 slot uses the Steel Armor design in a similar fashion. The front USB Type-C port will make it easy to connect a VR headset to this motherboard to take advantage of MSI's VR Boost feature.
Subject: Graphics Cards, Shows and Expos | May 25, 2017 - 07:24 PM | Jeremy Hellstrom
Tagged: external gpu, zotac, thunderbolt 3, computex 2017
They haven't given us much detail but as you would expect the ZOTAC external GPU box connects an GPU to your system via a Thunderbolt 3 connector, allowing you to add more GPU power to a mobile system or any other computer which needs a little boost to its graphics. You can fit cards of up to 9" in length, which makes it a perfect match for the two Mini-GPUs just below or other lower powered cards which are not as well endowed as your average GTX 1080 or 1080 Ti. It also adds four USB 3.0 ports and a Quick Charge 3.0 port to your system so you can leave it at home and simply attach your laptop via the Thunderbolt cable and get right to gaming.
Subject: Graphics Cards, Shows and Expos | May 25, 2017 - 07:00 PM | Jeremy Hellstrom
Tagged: zotac, GTX 1080 Ti Mini, GTX 1080 Ti Arctic Storm Mini, gtx 1080 ti, computex 2017
ZOTAC is claiming bragging rights about the size of their new GTX 1080 Ti's, that they are the smallest of their kind. The two new cards measure a miniscule 210.8mm (8.3") in length and in the case of the Arctic Storm mini it is the lightest watercooled GPU on the market.
You can see the size of the ZOTAC GeForce GTX 1080 Ti Mini by how much of the length is taken up by the PCIe connector, compared to most 1080 Ti's which are over a foot long. This card is not long enough to fit a third fan on.
The Arctic Storm version is the same size as the air-cooled model but opts for the worlds lightest watercooler. That may mean you want a powerful pump attached to the GPU as there is less metal to transfer heat but it means small silent builds can pack a lot of graphical power.
Both these cards will use dual 8-pin PCIe power connectors, expect to see more of them at Computex.
Subject: Cases and Cooling, Shows and Expos | May 23, 2017 - 03:28 PM | Jeremy Hellstrom
Tagged: FSP Group, water cooling, modular psu, Hydro PTM+, 80 Plus Platinum PSU, kilowatt, computex
FSP will be showing off several new products at Computex but the most interesting, by far, is a watercooled PSU called the Hydro PTM+. Under normal operations this is a 1200W modular PSU with an 80 PLUS Platinum rating, but include it in a cooling loop and it will provide up to 1400W of power. It can also be run silently up to 50% load, so if you only need ~600W this might still be of use if you are attempting a silent build and yes, there are LEDs on the PSU. Hopefully we can see some more revealing pictures from Computex with the internal layout exposed.
They will also be showing off the world's smallest 850W PSU, the 80 Plus Platinum certified FLEX as well as a not so petite 1600W 80 Plus Platinum PSU for servers and the more extreme of us. Along with those PSUs they are introducing the The ERK, or Easy Redundant Kit, which allows you to hook up two independent PSUs which don't normally support redundancy and rely on them just as if they were. Check out the full PR below.
May 23, Taipei, Taiwan – FSP, one of the leading manufacturers of power supplies in the world is pleased to unveil its focus on delivering continued performance at Computex 2017. FSP’s new power and gaming solutions were developed in cooperation with industry partners, and in the IoT world, the keywords Smart and Inter-operability are reflected in the IoT products on display allow customers to take control from anywhere in the world. Also, Computex gives a look at how FSP’s unique redundancy solutions can create products that can span various segments with customer focus in mind.
FSP introduces the new Hydro PTM+ liquid cooled PSU.
The Hydro PTM+ is a unique, and patented liquid cooled PSU created in cooperation with Bitspower, a renowned creator of liquid cooling solutions for PCs, to meet the highest security and safety standards. The Hydro PTM+ is the world's first mass produced liquid cooled PSU with 80 Plus Platinum certificated, with gorgeous LED lighting it combines great looks with amazing performance. The unique liquid cooling system, once enabled, increases the power rating from 1200W to 1400W. But, with an array of integrated sensors, the Hydro PTM+ also excels at efficiency, when running in silent mode (below 50% load) it still delivers 600W without the use of a fan for cooling, and thus it remains in complete silence.
FSP industrial solutions, powering the smart world.
With the industry focus rapidly shifting to IoT, FSP is on the forefront of working with advanced industry partners to provide power products that integrate easily into a wide range of smart IoT solutions. With Big Data a key for IoT energy management, FSP is ahead of the curve by providing power supplies with PoE, PMBus, and USB communication interfaces that help collect vital data such as fan speeds, wattage, voltage, current, alert and load status.
This data helps manage and size solutions and increase up-time and productivity, especially in iFactory, smart manufacturing solutions, intelligent logistics, and smart transportation.
World Smallest 80 Plus Platinum 850W FLEX PSU
Another great innovation by FSP is the world smallest 80 Plus Platinum certified 850W FLEX PSU. Also in the IoT solution area, you can find the 1600W 80 Plus Platinum certified Intel CRPS PSU, with Current Sharing and Cold Redundancy for amazing efficiency in the data center. Next to that, are the modular, but full voltage input DIN rail PSUs that can perfectly support a wide variety of IoT devices electrical demands.
Easy redundant kit, a unique approach to redundancy
The ERK, Easy Redundant Kit, is a versatile backup solution for entry-level systems that require 24/7 up-time from their power solution. Differing from traditional and expensive redundancy options, the ERK is a unique external DC-DC module which allows operators to create redundancy by combining two traditional non-redundant PSUs with the ERK. This brilliant product offers the best flexibility when choosing power design solutions.
Subject: Shows and Expos | January 9, 2017 - 12:26 PM | Jeremy Hellstrom
Tagged: CES, CES 2017
T'is the season to build up a list of all the products you covered at CES and see if there are any you missed. Many tech sites are in the process of clearing out, for instance The Tech Report have conglomerated all of their CES observations right here. They hit few more laptop booths, including Razer's triple monitor display which someone later walked off with, along with Samsung, Toshiba, Dell and numerous others. They never did succeed in their search for a Freesync 2 monitor, nor did anyone else for that matter, nor could they escape the taste of the rainbow coming off of every peripheral and motherboard. Sadly, they also missed the brush.
"Well, CES 2017 is over. We don't know if you were busy last week, but things were pretty crazy here at TR HQ. We doubled down on CES coverage and did our best to take a good look at all the hardware news that poured out from the show. Check out our full coverage below."
Here is some more Tech News from around the web:
- CES 2017 roundup: The good, the bad, and the frankly bonkers @ The Register
- Fedora 25: You've got that Wayland feelin', oh, that Wayland feelin' @ The Register
- First 64-Bit and Enterprise OS Comes to Raspberry Pi 3 @ Linux.com
- CES2017: Monoprice Unveils Expanded Line of 3D Printers @ Hack a Day
- The First AMD Naples + Radeon Instinct Reference Design Revealed! @ TechARP
- LG Threatens To Put Wi-Fi in Every Appliance it Introduces in 2017 @ Slashdot
- IMDb Ignores New Law Banning It From Publishing Actors' Ages Online, Cites Free Speech Violations @ Slashdot
Subject: Graphics Cards, Displays, Shows and Expos | January 6, 2017 - 03:19 PM | Jeremy Hellstrom
Tagged: freesync 2, amd
So far we have yet to see a Freesync 2 capable monitor on the floor at CES but we do know about the technology. We have seen Ryan's overview of what we know of the new technology and its benefits and recently The Tech Report also posted their thoughts on it. For instance, did you know that there are 121 FreeSync displays from 20 display partners of various quality, compared to NVIDIA eight partners and 18 GSYNC displays. The Tech Report are also on the hunt for a Freesync 2 display at CES, we will let you know once the hunt is successful.
"AMD has pulled back the curtain on FreeSync 2, the new version of the FreeSync variable refresh rate technology."
Here are some more Graphics Card articles from around the web:
- 31-Way NVIDIA GeForce / AMD Radeon Linux OpenGL Comparison - End-Of-Year 2016 @ Phoronix
- The RX 480 vs. the 290X vs. the GTX 1060 – Has AMD Neglected Hawaii? – 35 games benchmarked @ BabelTechReviews
- The Perf-Per-Watt Of NVIDIA Fermi To Pascal, AMD R700 To Polaris With Newest Linux Drivers @ Phoronix
- ZOTAC GeForce GTX 1070 AMP! Graphics Card @ Custom PC Review
- ASUS STRIX GTX 1060 O6G GAMING @ [H]ard|OCP
Subject: General Tech, Shows and Expos | January 5, 2017 - 05:19 PM | Jeremy Hellstrom
Tagged: corsair, K95 RGB Platinum, mechanical keyboard, CES, CES 2017, Cherry MX
Corsair's new K95 RGB Platinum mechanical keyboard should not be thrown in a fit of frustration, the aircraft-grade anodized brushed aluminium body will not be what breaks upon impact. Then again it is not the body most are interested in, most prefer to focus on the Cherry nubbins and this keyboard has them! You can choose either the CHERRY MX Speed with a mere 1.2mm of travel or Cherry MX RGB Brown if you prefer to bottom out with authority.
For those who need to be brought into the light this keyboard offers more than just lighting underneath the keys, it also has a 19-zone light bar called the LightEdge at the top. All of these lighting effects are programmable through the Corsair Utility Engine, as is the functionality of the six programmable macro keys on the keyboard. For those with a more utilitarian mindset, the detachable dual-sided soft-touch wrist rest and USB pass-through port are beneficial inclusions.
You should see them available online in the very near future, with an MSRP of $199.
K95 RGB Platinum Specifications
- Aircraft-grade anodized brushed aluminum frame: Built to withstand a lifetime of gaming.
- Lightweight and rugged durability, necessary for a keyboard that’s going to see a lot of action.
- 8MB profile storage with hardware macro and lighting playback: Allow access for up to three stored profiles on the go, independent of external software.
- Dynamic multicolor per key backlighting with LightEdge: Adjust each key’s color and illumination level in addition to 19-zones on the LightEdge light bar for sophisticated and dramatic animations and effects.
- 100% CHERRY RGB mechanical key switches: Unleash blistering speed with the 1.2mm actuation of CHERRY MX Speed mechanical keyswitches, or feel the tactile feedback of Cherry MX RGB Brown keyswitches.
- Six programmable G-keys keys for in-game macros: Assign single keystrokes or complex multi-key combos to any of the six dedicated macro keys.
- USB 2.0 pass-through port: Provides convenient access to an additional USB port for your mouse or headset.
- Black or Gunmetal: Available in two distinctive anodized finishes, Black or Gunmetal. (Gunmetal initially only available in North America with Cherry MX Speed switch.)
- Detachable, dual-sided soft-touch wrist rest: The comfort to enhance your gameplay during marathon gaming sessions. Choose between two different surfaces for optimal comfort.
- Dedicated volume and multimedia controls: Control to adjust audio on the fly, without interrupting your game.
- 100% anti-ghosting with full key rollover: No matter how fast your in-game actions are, every keypress registers correctly.
- Fully programmable with CUE: Intuitive and powerful Corsair Utility Engine (CUE) enables sophisticated macro programming and fast, fluid dynamic multicolor illumination.
- Windows key lock mode: Stay focused and prevent accidental Windows and Context Menu key presses.
- FPS and MOBA keycap sets: Textured and contoured keycaps provide maximum grip and enhanced feel.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech, Shows and Expos | January 5, 2017 - 04:25 PM | Jeremy Hellstrom
Tagged: Scimatar Pro RGB, gaming mouse, corsair, CES 2017, CES
Just look at that mouse, you could do your taxes with it if your thumb was flexible enough! 17 buttons in total with a full dozen programmable thumb buttons for you MMO and MOBA players. It should allow you to set up just about anything you wanted done on your mouse, leaving your keyboard hand free for ...
The 16,000 DPI sensor is a PIXART PMW3367 optical sensor and the CORSAIR Utility Engine allows you to set incremental sensitivity increases as low as a single DPI. As is tradition this year, the mouse features four-zone RGB lighting which can also be controlled via CUE to let you personalize your mouse's inner glow.
SCIMITAR PRO RGB Specifications
- Exclusive Key Slider macro button control system: The patent-pending design provides 8mm of key travel with a secure lock to ensure every button is within reach.
- 12 Optimized mechanical side buttons: Designed to pro-player specifications for consistent tactile feedback and precise actuation.
- Textured side button keycaps provide enhanced grip and feel.
- Onboard storage with hardware macro playback: Three predefined profiles include actions common for MMO/MOBA gaming as well as general purpose keyboard shortcuts. Advance your gameplay and create your own profile with custom actions and lighting effects.
- Custom PMW3367 PIXART 16,000 DPI optical sensor: Ultra-accurate and high-speed tracking engine.
- Native 16,000 DPI resolution, settable in single DPI steps, can be custom tuned to virtually any type of mouse pad.
- Available in yellow or black: Styled to suit your system, the SCIMITAR PRO RGB is available in both yellow and black finishes.
- Surface calibration tuning utility: Optimizes sensor precision and responsiveness for your playing surface.
- Dynamic multicolor four-zone backlighting: Customizable backlighting immerses you in the game by providing nearly unlimited lighting adjustability.
- Comfortable, precision, optimized shape: Crafted to fit your palm for the highest level of comfort no matter your hand size or grip style.
- Ultrafast 1ms lag-free game play: Supports up to 1,000Hz/1ms USB refresh rate for a near instant response to your movements.
- CUE software control supercharges your mouse: Enables you to program custom MMO timer countdowns, double macros, DPI matrices, and more.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Cases and Cooling, Systems, Shows and Expos | January 5, 2017 - 04:03 PM | Jeremy Hellstrom
Tagged: TX-M Series, PSU, HX Series, corsair, CES 2017, CES, bulldog, 80 Plus Platinum, 80 Plus Gold
We will let Corsair speak for themselves about these three products.
Platinum and Gold – HX and TX-M
Equipped with 100% Japanese 105°C capacitors the new HX series offers 80 Plus Platinum efficiency for up to 94% efficient operation. Fully modular cabling makes clutter-free builds easy, while a large 135mm cooling fan and Zero RPM mode allow for virtually silent operation. Rated for operating temperatures up to 50°C, the HX series is designed to deliver superb electrical performance and efficiency in the most demanding situations.
Also furnished with 100% Japanese capacitors and rated to 50°C, the new TX-M series delivers 80 Plus Gold efficiency paired with fantastic electrical performance and reliability. Combined with semi-modular cables for immaculate builds, the TX-M series hits the sweet spot of features and performance that PC enthusiasts demand.
Bulldog 2.0 - Build Your Living Room PC Better
CORSAIR Bulldog 2.0 retains the sleek looks and small form factor layout of its predecessor, effortlessly fitting into home theatre or living room setups. Within the glossy exterior, Bulldog 2.0 is completely upgraded for 2017, to be the ultimate living room barebone kit. Boasting the very latest Intel Z270 Mini-ITX motherboard from MSI, Bulldog 2.0 is ready to overclock and push performance limits with new Intel 7th Generation Core processors. Bulldog 2.0 also includes an all-new low-profile liquid CPU cooler, the H6SF, and the best-in-class CORSAIR SF600 SFX PSU, as well two low-noise 92mm PWM-controlled cooling fans based on the award-winning CORSAIR ML Series. With a high-performance case, PSU, cooler and motherboard all included and pre-installed, CORSAIR Bulldog 2.0 is the ideal starting point to build the ultimate living room PC.
Follow all of our coverage of the show at http://pcper.com/ces!