Intel unveils updated X-Series HEDT processors, 28-core Xeon for Workstations
Subject: Processors | October 8, 2018 - 11:14 AM | Ken Addison
Tagged: xeon w-3175x, xeon, x299, Intel, i9-9890xe, C621, 9th generation, 28-core
Consumer processors weren't the only Intel products to see an update today, as Intel announced updates to their HEDT lineup, as well as a new platform for their 28-core processor previously announced at Computex.
First is the Xeon W-3175X, which readers will remember from the now infamous Intel demonstration at Computex, featuring a 5 GHz overclock achieved through the use of a 1HP water chiller.
Today we were introduced to the final product iteration of this 28-core demo, the Xeon W-3175X. Utilizing the same C621 chipset, this processor is essentially a Xeon Platinum 8180 which launched in late 2017 but with an unlocked multiplier and running at higher clock speeds.
The Xeon W-3175X provides a 600 MHz base clock and a 500 MHz Turbo Boost 2.0 clock advantage over the Xeon Platinum 8180. Along with these clock speed increases comes a TDP increase to 255W, compared to the 205W TDP of the Xeon 8180.
Additionally, Xeon W-3175X will support the same six-channel ECC memory configuration as the Xeon Platinum 8180. Similarly, the Xeon W-3175X will use the LGA3647 socket, currently only found on the Xeon Scalable family of processors.
Given that current lack of LGA3647-based workstation motherboards and the TDP increase over the Xeon Scalable processor, this new Xeon-W part will mean the release of all-new motherboards, a sneak peak of which we saw at Computex. ASUS and Gigabyte are said to be the launch partners, with motherboard options to be available in December alongside the processor.
On the slightly more reasonable side, we have the refresh of Intel's X-series HEDT processors.
Topping off with the 18-core i9-9980XE, this lineup looks very familiar to Intel's current HEDT lineup, aside from some clock speed and core count increases.
Instead of starting at a 6-core, 12-thread configuration like the 7th generation, the 9th generation HEDT parts now start at the same 8-core, 16-thread configuration we see with the i9-9900K. Similarly, there are now two 10-core SKUs, the i9-9820X and i9-9900X.
Across the board, we see a 300-400 MHz increase on the base clocks of these new parts compared to the previous generation, as well as a 200-300 MHz to the Turbo Boost 2.0 clock speeds.
The X-series processors will once again feature a soldered connection between the die and heatspreader for increased thermal performance.
These new X-series processors will continue to use the X299 platform, although we expect to see a few newly revised motherboards based on the X299 chipset from partners as we have for other HEDT launches.
While the new 9th generation consumer CPUs feature a combination of hardware, software, and microcode updates for side-channel attack vulnerabilities like Spectre and Meltdown, both the new X-series CPUs as well as the Xeon W-3175X only feature microcode and software fixes as detailed below:
Speculative side channel variant Spectre V2 (Branch Target Injection) = Microcode + Software
Speculative side channel variant Meltdown V3 (Rogue Data Cache Load) = Microcode
Speculative side channel variant Meltdown V3a (Rogue System Register Read) = Microcode
Speculative side channel variant V4 (Speculative Store Bypass) = Microcode + Software
Speculative side channel variant L1 Terminal Fault = Microcode + Software