There is something alluring about packing high-end motherboard hardware into a mini-ITX form factor, and it looks as though EVGA will be joining the small form factor game with its first Z77 mini-ITX board. German enthusiast site OCaholic managed to get its hands on the board for a short preivew, and with dimensions of 17 cm x 17 cm, the motherboard packs a ton of overclockable hardware into an attractive design. 

The Z77 motherboard features an Intel LGA 1155 socket that can accept either Sandy Bridge or Ivy Bridge processors in the i3, i5, and i7 flavors. To the left of the CPU socket is an 8-phase power phase with International Rectifier IR3550M MOSFETS. There is also an additional power phase dedicated to getting clean power to the memory. To the right of the CPU socket are two DDR3 memory slots capable of supporting a maximum of 32GB of RAM.

The top right corner of the mini-ITX motherboard features red power and reset buttons as well as an LED display capable of displaying error codes should you push the board too far and it fails to post. The EVGA motherboard features a UEFI BIOS from which you can overclock or reset the board to defaults that should be similar to the company’s current offering.

Along the bottom of the Z77 motherboard is a PCI-E 3.0 X16 slot for adding a graphics card. Directly above the PCI-E 3.0 slot (from left to right) is a USB 3.0 header, mSATA connector, southbridge, and four SATA ports. Two are SATA 6.0 Gb/s ports (Intel RAID 0, 1, 4, 0+1), and the other two are SATA 3.0 Gb/s ports that support Intel RAID 0, 1, 5, 0+1, and JBOD. While it should not be a problem for most users, the SATA ports and RAM slot are packed in really close to the PCI-E slot, so if you are using a graphics card that utilizes a large heatsink, you will probably want to avoid this board. Unfortunately, that’s just one of the compromises necessary to get a motherboard this small though. At least the SATA ports are above the PCI-E 3.0 slot and not to the right of it (like some boards are set up).

Rear IO on the EVGA Z77 mini-ITX motherboard is pretty impressive for a board of this size. You get two USB 2.0 ports, Bluetooth, a small clear CMOS button to reset the BIOS to defaults, four USB 3.0 ports, 1 mini DisplayPort (or possibly Thunderbolt) port, two eSATA 6.0 Gb/s ports, 1 HDMI port, 1 Gigabit LAN port, five audio output jacks courtesy of a Realtek ALC898 8-channel controller, and one optical audio output (S/PDIF).

Unfortunately, there is no word yet on price or availability. Talk around the internet seems to suggest a release date sometime in September and price above $150, but as always you should take those numbers with at least a few grains of salt. Even so, this is an interesting motherboard, and I’m always glad to see more competition in the small form factor and mini-ITX hardware space.

The EVGA board has now joined the Gigabyte GA-H77N WIFI and the ASUS P8Z77-I Deluxe in the Z77 Mini ITX game. Here’s hoping the increased competition can bring prices down so I can get to building a nice Mini-ITX powered HTPC like the one Ryan built with an AMD APU (and desktop Trinity’s launch date seems to be getting further away rather than closer).

EVGA Mini ITX Z77 Motherboard In the Works - Motherboards 4EVGA Mini ITX Z77 Motherboard In the Works - Motherboards 5EVGA Mini ITX Z77 Motherboard In the Works - Motherboards 6

You can find more photos of the EVGA Mini-ITX motherboard over at OCaholic, and as always PC Perspective has you covered on mini-ITX motherboard news. Stay tuned for more details on this EVGA board as we get them!

Read more about mini-ITX motherboards.