Corsair Overclocks With a Vengeance, Launches DDR4 4600 MHz Memory Kit

Subject: Memory | September 21, 2017 - 11:46 AM |
Tagged: X399, ryzen, overclocking, Intel X299, ddr4-4600, ddr4, corsair

Corsair has launched a new Vengeance LPX DDR4 memory kit that is capable of hitting 4600 MHz at 1.5 volts. The new kit is a 16GB (2 x 8GB) kit that Corsair reportedly co-developed with AsRock for fine tune using their X299 OC Formula motherboard. The DDR4 kit is made using hand sorted Samsung B-dies and it supports Intel XMP 2.0 standards allowing it to clock at 4600 MHz with a single setting change in the UEFI.

View Full Size

The Vengeance LPX DIMMs run with CAS timings of 19-26-26-46 and need only 1.5V to clock at 4600 MHz. This kit will be ideal for Intel’s X299 as well as AMD’s X399 platforms. While Ryzen and Threadripper platforms may need a bit more tweaking to get working, they would benefit the most from the higher clocked memory allowing the Infinity Fabric to clock higher.

Being one of the highest factory clocked DIMMs, they come at a cost. The new RAM kit (CMK16GX4M2F4600C19) is available now for $549.99 with a lifetime limited warranty.

For something a bit more tame, earlier this week Corsair launched a 2 x 8GB kit (CMK16GX4M2F4500C19) clocked at 4500 MHz with CL19-19-19-39 timings (at 1.45V) that is also available now for $479.99 MSRP. Enthusiasts might be better off buying the cheaper kit and overclocking them (though not guaranteed and might need a bit more than 1.5V) while workstation and enterprise customers with corporate expense accounts can opt for the more expensive but factory clocked 4600 MHz kit.

At time of writing the new kits were not up on Amazon yet, but they should be shortly. You can find the cheaper 4500 MHz kit on Corsair's web store but it is listed at $504.99 currently. If you wait a bit, that price should go down closer to MSRP as other retailers put up their listings.

Source: TechPowerUp

September 21, 2017 | 09:14 PM - Posted by Mutation666

And prices are still fucking stupid for Ram, wish I would have stocked up on DDR4 when I got my 4x8kit for $150 like a little over a year ago.

September 22, 2017 | 02:01 PM - Posted by razor512

The prices have almost tripped in the past 2 years.

September 22, 2017 | 06:46 AM - Posted by Anonymous69854255 (not verified)

for what i need 19-26-26-46 and need only 1.5V to clock at 4600 MHz.
?

tests showing that it is worth the money?

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd> <blockquote><p><br>
  • Web page addresses and e-mail addresses turn into links automatically.

More information about formatting options

By submitting this form, you accept the Mollom privacy policy.