Cooler Master Introduces MasterLiquid Maker 92 AIO Liquid CPU Cooler

Subject: Cases and Cooling | August 17, 2016 - 11:43 AM |
Tagged: cooler master, MasterLiquid Maker 92, AIO, liquid cooler, self contained, convertible

Cooler Master has introduced an unusual all-in-one liquid CPU cooler with their new MasterLiquid Maker 92, a design which places all of the components together on top of the CPU block.

View Full Size

We've seen a similar idea from Corsair with the cooler first found in the Bulldog system, and later introduced separately as the H5 SF mini-ITX liquid cooler. Cooler Master's design uses a different arrangement, with push-pull 92mm fans sandwiching a radiator that rotates 90º to permit either a verticle or horizontal setup. The latter position allows for better low-profile chassis compatibility, and also adds airflow to motherboard components.

View Full Size

Specifications:

  • Model: MLZ-H92M-A26PK-R1
  • CPU: Intel LGA 2011-v3/ 2011/ 1151/ 1150/ 1155/ 1156 socket
  • Power Connector    : SATA and 4-Pin
  • Radiator Material: Aluminum
  • Dimensions: 
  • Vertical: 99.9 x 81.6 x 167.5mm (3.9 x 3.2 x 6.6”)
  • Horizontal: 99.9 x 142 x 118.8 mm (3.9 x 5.6 x 4.7”)
  • Fan:
    • Dimension: Φ95x 25.4 mm (3.7 x 1”)
    • Airflow: 49.7 CFM (max)
    • Air Pressure: 6.4 mmH2O (max)
    • Noise Level: 30 dBA (max)
  • Pump:
  • Noise Level: <12 dBA (max)
  • MTTF: 175,000 hours
  • L-10 Life: 50,000 hours
  • Rated Voltage: 12VDC
  • Warranty: 5 Years

View Full Size

Cooler Master is offer pre-orders on a first-come, first-serve basis beginning August 30 from this page. Pricing is not listed.


August 17, 2016 | 12:09 PM - Posted by Chaitanya Shukla

Interesting concept, waiting for a review.

August 17, 2016 | 04:24 PM - Posted by Anonymous (not verified)

Heatpipes transfer heat quite well on a distance of just few inches. Do not see the point of this.

August 17, 2016 | 01:11 PM - Posted by Buyers

How much of a backplate would this thing require, having all the mass of the radiator, fluid, and pump hanging off the socket?

August 17, 2016 | 02:44 PM - Posted by Anonymous (not verified)

I'd imagine it weighs the same or even less than some of the larger Noctua coolers or any triple fan cooler.

August 20, 2016 | 12:25 PM - Posted by Anonymous (not verified)

But with those Noctua coolers you are getting 1x140mm fan and 1x 120mm fan for the same weight that this gets you 2x 92mm fans. I doubt this will be worth the weight increase from going from heatpipes to full water loop.

August 17, 2016 | 03:33 PM - Posted by Anonymous (not verified)

Specifications:
Weight = "404"

:P

August 17, 2016 | 07:15 PM - Posted by aparsh335i (not verified)

This is cool!

August 26, 2016 | 05:26 PM - Posted by Anonymous (not verified)

The first thing I thought of when I saw this was the AIO water coolers Apple put on their Quad CPU PowerMac G5s.... They didn't work out too well.

http://www.journaldulapin.com/wp-content/uploads/2012/08/dualpumps4bw.jpg

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd> <blockquote><p><br>
  • Web page addresses and e-mail addresses turn into links automatically.

More information about formatting options

By submitting this form, you accept the Mollom privacy policy.