Phanteks Project 217 prototype case is finally official and will be known as the Evolv Shift and Evolv Shift X. Both are small form factor cases that feature a unique tower design that has the approximate footprint of a large graphics card, but manages to fit quite a bit of hardware inside by building up rather than out. The skyscraper style cases measure 6.7” wide and 10.63” deep. The Evplv Shift is the shorter of the two at 18.9” tall while the Evolv Shift X is 25.9”. The Mini ITX cases are constructed from a powder coated steel frame, aluminum cover panels, and tempered glass side panels.

HardwareCanucks shot video of the new SFF cases!

The Evolv Shift and Shift X both have black aluminum insides and a silver aluminum front panel. There are fam vents around the edges of the front panel and two USB 3.0 ports tucked away on the side. The top of the case covers the motherboard I/O and has a cutout in the back for routing the I/O cables out of the case – on the Shift X this piece is also aluminum but on the Shift it is plastic to cut costs. The two tempered glass side panels and front and back panels are held on by thumbscrews to allow for easy removal to work on the build. Being able to take all four sides off should make to easier to build in the small space.

Other case features include removable case feet that enables you to lay the case horizontally on one of its two sides (so you can show off the CPU side or GPU side), dust filters up front, and separation of the two front fans and compartments so that one can be an intake and the other exhaust if you wish. For such a small case there is quite a njt of cable management going o with rubber grommets and horizontal cable tracks (with a magnetic door for easy access) to hid away your cables and pass them from the PSU compartment to the motherboard compartment). Interestingly the GPU is mounted vertically and the bracket can be rotated and adjusted left and right so that you can choose to see the back of the graphics card or (finally!!) the front of the card with the artwork — that’s right a case that lets you see and show off the stickers and cooler of your graphics card! (hehe, it has always irked me they put the artwork on the part of thr GPU you usually never see once it's in the case.)

Internally, the case is divided into two main areas with the power supply on bottom along with room for water cooling pumps and reservoirs and the motherboard, processor, and graphics cards stacked on top of the PSU area. The Evolv Shift and Evolv Shift X both support small form factor power supplies (SFX and SFX-L), Mini ITX motherboards, and even large graphics card thanks to the riser cable and vertical mounting. The larger Shift X can also hold ATX PSUs with the caveat that you have to give up the PSU shroud.

Cooling support includes air and water coolers with up to three 120mm or 140mm fans up front and one 120mm or 140mm fan in the bottom. The case will come with two 140mm fans out of the box.

As far as storage is concerned the case had room for two 2.5” drives and either one 3.5” drive on the Shift or two 3.5” drives on the Shift X.

Oh, and there is also an included RGB controller if you want to add a bit of bling to your dual windowed skyscraper PC.

The Evolv Shift and Evolv Shift X are coming later this year for $110 and $160 respectively.

These look to be very unique cases that will look good on a desk or even in the living room as a home theater PC. I am looking forward to the reviews on these as I am curious how well the case can keep high end components cool and how easy they are to build a system in.