Be Quiet! Shows Off New Silent Loop AIO Liquid Coolers
Subject: Cases and Cooling | September 29, 2016 - 12:38 AM | Tim Verry
Tagged: water cooling, liquid cooler, Intel, copper radiator, be quiet!, amd, AIO
Be Quiet!, a popular German manufacturer of PC cases and power supplies is jumping into the liquid cooling game with the introduction of its new Silent Loop all-in-one (AIO) liquid coolers. Through a partnership with Alphacool, Be Quiet! Is launching three new coolers with 120mm, 240mm, and 280mm radiators. It is not clear exactly when they will be arriving stateside but pricing is approximately $124, $143, and $170 respectively.
The Silent Loop 280 AIO liquid CPU cooler.
The new coolers come clad in all black and feature a new pump design paired with copper cold plates and copper radiators. This is nice to see in the wake of aluminum radiators because using the same metals throughout the loop mitigates the risk of galvanic corrosion that will eventually occur in loops that use mixed metals.
The AIO loop is paired with two Silent Wings 2 fans which use rifle bearings and can spin up to 2,000 RPM. To further set the Silent Loop series apart, Be Quiet! uses a nickel plated CPU cold plate, a radiator with a fill port to allow users to top up the fluids over time, and a reportedly innovative (read: not infringing on Asetek IP) "decoupled reverse flow pump" that spins at 2,200 RPM and allegedly reduces noise to nearly inaudible levels. The pump pulls water into the block and over the cold plate and then pulls it through the pump which is in a sectioned off area of the block.
As for the copper radiators, Be Quiet is using 30mm radiators on the Silent Looop 240 and Silent Loop 280 coolers with two fans side by side and a thicker 45mm radiator on the Silent Loop 120 with two fans in a push-pull configuration. Be Quiet! claims that the 120mm, 240mm, and 280mm coolers can handle wattages of 270W, 350W, and 400W respectively (these numbers are likely with the fans cranked to their maximum speeds heh). The included fans can be controlled via PWM and Be Quiet! includes a Y splitter that allows users to attach both fans to one PWM motherboard header – which is good since the CPU_Fan header is sometimes the only "true" PWM header offered.
The liquid coolers use Philips screws throughout for mounting the radiator, fans, and CPU mount and they are compatible with all the usual Intel and AMD sockets.
Several sites already have reviews of the new coolers including Kit Guru and Guru3D. According to Leo Waldock from Kit Guru, the Be Quiet! Silent Loop 240 is a "funky and nice piece of hardware" and while it did not blow him away it is competitively priced and performs very closely to the Corsair H100i V2. Out of the box the cooler was reportedly inaudible but with lackluster cooling performance; however, once the fans were cranked up from their normal 1,100 RPM to 1,400 RPM cooling performance greatly improved without sound getting too out of control.
In all it looks good aesthetically and appears to be easy to install. If you are in the market for an AIO and do not need fancy extras (LEDs, monitoring software, ect), the Silent Loop coolers might be worth looking into. Hopefully we can get one in for review so that Sebastian or Morry can take it apart... I mean test it! (heh).