Antec Shows New Eleven Hundred and P280 Cases at Blizzcon 2011

Subject: Cases and Cooling | October 22, 2011 - 01:06 PM |
Tagged: p280, eleven hundred, chassis, antec, 1100

I hope everyone took at a look at our Day 1 Blizzcon 2011 photos yesterday (and liked our Facebook page for it!), and if you did you already got a sneak peek at the new Antec cases that I am going to feature here today.  Antec has a pretty big presence at Blizzcon including a booth with a lot of ongoing competitions and prizes as well as providing ALL of the cases for the World of Warcraft, StarCraft II and Diablo III free play areas.

Both the new Eleven Hundred (or 1100 I guess) and the P280 are based on the same basic chassis design but with some interesting differences to point out.  Let's start with the Eleven Hundred:

View Full Size

Antec's upcoming Eleven Hundred chassis

This case is going to attempt to bring the Antec design back into the world of high performance users and gamers and starts with a full-size ATX that includes plenty of airflow.  You can see that the front of the case includes a pair of fans while the side window does the same. 

View Full Size

Below the window is a removable fan intake filter for the bottom mounted power supply.  This was actually one of my many requests to case builders - don't make me move my case out of its area to clean the filters!

View Full Size

Taking off the side panel you can see the removable drive bays and plenty of room for longer graphics cards.

Continue reading our preview of the upcoming Antec Eleven Hundred and P280 cases!!

View Full Size

The Eleven Hundred has enough room for the popular self contained water coolers and includes a large top fan.

View Full Size

Antec has also adopted the internal cable management features we prefer on cases like those from Corsair and even has rubber grommets on them to protect the wires from wear.

View Full Size

Behind the motherboard Antec has included a lot of space for cable routing and airflow.

View Full Size

In fact, Antec has even included a fan that blows air directly onto the back of the motherboard and processor area to help push hot air out of the back of the chassis.

Now, as for the P280, being based on the same basic internal design, there are only a few key differences.

View Full Size

Antec's upcoming P280 chassis

Much like the previous Performance series cases it has a swinging door on the front.

View Full Size

Though hard to see with this lighting, there is sound dampening foam on the front door and internally on the side panels as well.  Unlike the Eleven Hundred, the front fan filter is removable for easy cleaning.

View Full Size

Here you can see the internals of the case without all of the components installed to get a better idea of the features both designs offer.  One note, Antec informed us that the rear side panel fan won't actually be included on the P280.

View Full Size

Finally, rather than the single large fan the P280 will include dual 120mm fans and of course offer support for larger radiators for water cooling.

Antec tells us these cases should be on the market pretty soon and you can expect a full review of both of them on PC Perspective coming up!!

October 22, 2011 | 01:35 PM - Posted by Anonymous (not verified)

Sick review...I have a 1200 antec..and I would love this 1100...

October 22, 2011 | 02:22 PM - Posted by Grunteh

Finally, a case I might consider buying from Antec.

October 22, 2011 | 02:30 PM - Posted by Mark (not verified)

Can we confirm those are usb3 ports in front with a internal connection, the blue color was missing from my perspective.

October 22, 2011 | 03:57 PM - Posted by Anonymous (not verified)

according to other previews there are 2 USB2 and 2 USB3 connectors with internal connections

October 24, 2011 | 10:09 AM - Posted by Anonymous (not verified)

When it's reviewed, I'd love to see a proper comparison of noise levels between this case and the earlier P182/183.

October 26, 2011 | 02:45 PM - Posted by perfectshot (not verified)

I have a P180 and now hate it. It was great in the beginning but the cable management became close to impossible with a GTX285.

Antec is still one of my top three affordable choices. Lian Li is often out of my price range. Why spend $500 more on a case when I could go SLI (never had more than one GFX) or spent it on a fast IPS panel???

If BF3 brings my 5 year old PC to it's knees, I'll look for a new case. My kittens took out the front door of my P180...

The 1200 is a bit too open. I'm looking for a water proof case for potential beverage spills.

January 6, 2012 | 01:49 PM - Posted by ProfeZZor X (not verified)

Without any knowledge of Antec's history or it's products, I just bought the Antec 1100 case a few weeks ago, on a spontaneous shopping spree at Fry's. Needless to say, my decicion was based on the cardboard box's appearance, and the images - since the store did not have a unit on display. After reading the great online reviews shortly thereafter, I'm glad I made the right choice. Otherwise I would have returned it within a matter of days.

Now I feel confident about this case for my first computer build, knowing that it has the necessary appetures and containment compartments for today's water & air cooling needs for X79 chipset and 2nd generation i7 gaming motherboards - and has the support of such a wide variety of builders.

Post new comment

The content of this field is kept private and will not be shown publicly.
  • Lines and paragraphs break automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd> <blockquote><p><br>
  • Web page addresses and e-mail addresses turn into links automatically.

More information about formatting options

This question is for testing whether you are a human visitor and to prevent automated spam submissions.