Introduction

VROC vs. RST, Optane vs. 960 PRO

Introduction

We've been hearing about Intel's VROC (NVMe RAID) technology for a few months now. ASUS started slipping clues in with their X299 motherboard releases starting back in May. The idea was very exciting, as prior NVMe RAID implementations on Z170 and Z270 platforms were bottlenecked by the chipset's PCIe 3.0 x4 DMI link to the CPU, and they also had to trade away SATA ports for M.2 PCIe lanes in order to accomplish the feat. X99 motherboards supported SATA RAID and even sported four additional ports, but they were left out of NVMe bootable RAID altogether. It would be foolish of Intel to launch a successor to their higher end workstation-class platform without a feature available in two (soon to be three) generations of their consumer platform.

To get a grip on what VROC is all about, lets set up some context with a few slides:

First, we have a slide laying out what the acronyms mean:

  • VROC = Virtual RAID on CPU
  • VMD = Volume Management Device

What's a VMD you say?

…so the VMD is extra logic present on Intel Skylake-SP CPUs, which enables the processor to group up to 16 lanes of storage (4×4) into a single PCIe storage domain. There are three VMD controllers per CPU.

VROC is the next logical step, and takes things a bit further. While boot support is restricted to within a single VMD, PCIe switches can be added downstream to create a bootable RAID possibly exceeding 4 SSDs. So long as the array need not be bootable, VROC enables spanning across multiple VMDs and even across CPUs!

Assembling the Missing Pieces

Unlike prior Intel storage technology launches, the VROC launch has been piecemeal at best and contradictory at worst. We initially heard that VROC would only support Intel SSDs, but Intel later published a FAQ that stated 'selected third-party SSDs' would also be supported. One thing they have remained steadfast on is the requirement for a hardware key to unlock RAID-1 and RAID-5 modes – a seemingly silly requirement given their consumer chipset supports bootable RAID-0,1,5 without any key requirement (and VROC only supports one additional SSD over Z170/Z270/Z370, which can boot from 3-drive arrays).

On the 'piecemeal' topic, we need three things for VROC to work:

  • BIOS support for enabling VMD Domains for select groups of PCIe lanes.
  • Hardware for connecting a group of NVMe SSDs to that group of PCIe lanes.
  • A driver for OS mounting and managing of the array.

Let's run down this list and see what is currently available:

BIOS support?

Check. Hardware for connecting multiple drives to the configured set of lanes?

Check (960 PRO pic here). Note that the ASUS Hyper M.2 X16 Card will only work on motherboards supporting PCIe bifurcation, which allows the CPU to split PCIe lanes into subgroups without the need of a PLX chip. You can see two bifurcated modes in the above screenshot – one intended for VMD/VROC, while the other (data) selection enables bifurcation without enabling the VMD controller. This option presents the four SSDs to the OS without the need of any special driver.

With the above installed, and the slot configured for VROC in the BIOS, we are greeted by the expected disappointing result:

Now for that pesky driver. After a bit of digging around the dark corners of the internet:

Check! (well, that's what it looked like after I rapidly clicked my way through the array creation)

Don't even pretend like you won't read the rest of this review! (click here now!)

« PreviousNext »