Introduction, Specifications, and Packaging
New externals from Samsung sporting USB 3.1 Gen 2!
Introduction:
Back in January of 2016, Samsung launched the Portable SSD T1. This was a good way to get more of their VNAND flash out into the market in the form of a speedy and portable USB connected SSD. The launch went so well that they followed it up with the T3 in early 2016. While the T1 maxed out at 1TB of capacity, the T2 pushed that to 2TB, which remains the market sweet spot for max portable capacity today. As increased flash densities come out, it became time for Samsung to refresh the lineup:
Meet the Samsung Portable SSD T5. This new version is ever so slightly smaller than the T3, while packing a 256Gbit die version of Samsung's 64-layer VNAND, along with a newer USB controller that should help get closer to the internal SATA 6Gbit speed of the device.
Specs:
Most specs are nearly identical to the T3, with a notable increase to 540MB/s throughput, thanks to the faster interface capability.
Packaging:
Straightforward packaging with a notable inclusion of both Type-C to A and C to C cables. The T3 and T1 came with only Type-A.
So is this $0.10/GB?
So is this $0.10/GB?
I think a USB 3.1g2 NVME
I think a USB 3.1g2 NVME drive would be nice, so you can get the max speed of the USB cable. Or better yet if we could see a USB 3.2 NVME drive to get near 2GB/s transfer of a USB drive.
So basically by using Sata
So basically by using Sata SSD inside, is Samsung just playing safe in terms of heat produced by M.2 SSDs? else it does look like a decent SSD for most people.
Well getting that extra 4
Well getting that extra 4 Gbit would require a move to PCIe, which draws more power, as well as the interface to USB (which doesn't really exist in reliable form just yet), which would also draw even more power. That's a lot to ask from a single USB port.
So first was the T1, then the
So first was the T1, then the T3, and now we have the T5? their naming scheme is so odd.
I see what you did there. 🙂
I see what you did there. 🙂
Will I be able to get a USB
Will I be able to get a USB 3.2 Type-C Y splitter/adaptor so I can hang two of these drives off of one USB 3.2 cable(Really only a regular USB Type-C cable with all the alt mode wires included) with is ability to carry 2 full channels of USB 3.1 connsctivity, one USB channel via the pimary USB 3.1 channel/wires and the other USB 3.1 Channel caried over the Type-C standard’s alt mode wiring/channel. To use USB 3.2 for some Raid O, or other, external raid drive connecitvity with these SKUs.
And what about any future USB 3.2 connectivity for this type of usage, as that USB 3.2 is just really only a couple of link aggregated USB 3.1 channels anyways.
Allen do you plan on doing a deep dive article into the new USB 3.2 standard and the different possibilities that will present for external RAID usage over USB 3.2/Type-C connections.
RAID of two separate external
RAID of two separate external removable devices like that is generally a bad idea from a reliability standpoint. It's also not readily supported by most operating systems without some hackery.
Linux is more open to those
Linux is more open to those sorts of things for sure while Windows 7 requires an upgrade to the pro version just to be whitelisted to do system image backups to an extarnal USB hard-drive, SSD, or networked share. But USB 3.2 and maybe an adaptor to allow for 2 USB 3.1 drives to be hung off of one Type-C cable with an adaptor/hub for data transfers and such may be useful.
I not really seeing many new laptops with even USB 3.1 gen 2 support and any USB 3.2/Type-C(20Gbs over 2 USB 3.1 channels) support will prabably have to wait for PCIe 4.0 adoption. That “reliability standpoint” has kept me using spinning rust mostly for backups.
So they use a 10Gb/s USB link
So they use a 10Gb/s USB link and then stuff it down a 6Gb/s SATA connection? Well, okay, that’s slightlly better than bottlenecking at the 5Gb/s USB link like th older ones did.
Let’s hope the next gen one uses an M.2 drive or is native USB. Hopefully 3.2 (20Gb/s).
Best to go with the native USB controller as the PCI-E of the M.2 would just waste power and add an unnecessary protocol layer.
Exactly, but I think it will
Exactly, but I think it will be a while before that happens, as Samsung is unlikely to develop its own USB controller just for this purpose.
Where’s that sad panda
Where’s that sad panda gif?
At 10Gb/s USB, I tend to agree with your conclusion, but I have to think that at 20Gb/s, they have enough incentive–if they want to keep ownership of this market–to do it.
I don’t know of any other companies (not that there aren’t any, just that I don’t know them) that have the flash interface IP and USB3 IP to make such a device–that’s why we tend to see compound devices like these instead of integrated ones. That said, Samsung does own all that IP, so they, if anyone would be in a good position to do it.
Come on, Samsung, do eeeeetttt!
A typo, Alan, first line, T1
A typo, Alan, first line, T1 was launch in 2015 not 2016. 🙂
Ayup, PCPer reviewed T1 on
Ayup, PCPer reviewed T1 on January 2015:
https://www.pcper.com/reviews/Storage/Samsung-Portable-SSD-T1-500GB-Review-External-EVO
Why not a USB 3.2
Why not a USB 3.2 gen?
http://www.androidpolice.com/2017/07/26/usb-3-2-spec-announced-double-speed-existing-type-c-superspeed-cables/
Nice to see (at last, Samsung
Nice to see (at last, Samsung !) a SATA-USB bridge chip that supports TRIM.
Mr. Malventano,could you please confirm whether this drive is fully compatible with the latest version of Samsung Magician? Thanks.
Magician only supports
Magician only supports Samsung’s internal SSDs. Who knows about the future though.
Availability?
Availability?
IIRC this is the only M.2
IIRC this is the only M.2 2242 drive that has up ot 2TB of capacity no?
It isn’t M.2. It is mSATA.
It isn’t M.2. It is mSATA.