Introduction and Specifications

Helium-filled 8TB Consumer HDD!

Introduction

Storage devices for personal computers have always been a tricky proposition. While the majority of computer parts are solid state, the computer industry has spent most of its life storing bits on electromechanical mechanical devices like tapes and floppy disks. Speaking relatively, it was only recently (less than a decade) that solid state storage became mainstream, and even today the costs of flash production make rotating media the better option for bulk data storage. Hard drives are typically vented to atmosphere, as the Bernoulli Effect is necessary as part of what keep the drive heads flying above the rotating platters. With any vented enclosure, there is always the risk of atmospheric contaminants finding their way in. Sure there are HEPA-class filters at the vent holes, but they can’t stop organic vapors that may slightly degrade the disk surface over time.

By filling a hard disk with an inert gas and hermetically sealing the disk housing, we can eliminate those potential issues. An added bonus is that if Helium is used, its lower density enables lower air friction of the rotating platters, which translates to lower power consumption when compared to an equivalent air-filled HDD. Ever since HGST released their Helium filled drives, I’ve been waiting for this technology to trickle down to consumer products, and Western Digital has recently brought such a product to market. Today we will be diving into our full performance review of the Western Digital 8TB Red.

Specifications (source)

Compared to the 6TB Red, the 8TB model doubles its cache size to 128MB. We also see a slight bump in claimed transfer rates. Idle power consumption sees a slight bump due to different electronics in use, and power/capacity figures check out as well (more on that later as we will include detailed power testing in this article).

« PreviousNext »