Subject: Graphics Cards | September 16, 2017 - 01:43 AM | Tim Verry
Tagged: WX 7100, Radeon Pro WX 5100, radeon pro, prorender, amd
At IBC 2017 (International Broadcasting Convention) in Amsterdam AMD made several announcements surrounding its Radeon Pro graphics cards for workstations. The graphics cards, which are aimed at professionals and replace the FirePro lineup, are now shipping to AMD customers with the Radeon Pro WX 5100 and WX 7100 available now and the higher end Radeon Pro WX 9100 and Radeon Pro SSG available from distributors and systems partners starting at the end of this quarter. The former two (the WX 5100 and WX 7100) carry a SEP (suggested e-tail price) of $499 and 799 respectively and are now officially support usage in external graphics setups (eGPU) for use with mobile workstations that can connect to an external graphics dock with the Pro series GPUs for things like 4K video editing and rendering on-the-go.
Currently AMD is partnered with Sonnet Technologies for the eGPU support and the Radeon Pro graphics cards fully support docks such as the Sonnet eGFX Breakaway Box. Of course, being able to plug into the raw computing horsepower does not mean much if it cannot be effectively utilized, and to that end AMD revealed several software design wins including the integration of its cross-platform OpenCL-based ray tracing renderer Radeon ProRender into MAXON Cinema 4D Release 19. ProRender is supported in the Adobe After Effects integration of Cinema 4D R19, and it is the first major application to implement it. Further, the Foundry Nuke 11 and Avid Media Composer 8.9 are also able to see performance improvements in effects rendering by using OpenCL-based programming techniques to harness GPU horsepower.
Finally, AMD casually reiterated another big design with for its professional series graphics cards with Radeon Pro Vega being used in the iMac Pro coming later this year. Considering the professional market is where the big money is to be made when it comes to graphics cards it is nice to see AMD making inroads with its revamped professional lineup and continuing to push for the cross platform OpenCL-based GPGPU technologies to be supported by the major software developers. Not much major news coming out of IBC from AMD (no new hardware revealed), but good news nonetheless.
Subject: Graphics Cards | November 7, 2016 - 09:32 AM | Josh Walrath
Tagged: WX 7100, WX 5100, WX 4100, workstation, radeon pro, radeon, quadro, Polaris, amd
The professional card market is a lucrative one. For many years NVIDIA has had a near strangle-hold on it with their Quadro series of cards. Offering features and extended support far beyond that of their regular desktop cards, Quadros became the go-to cards for many professional applications. AMD has not been overlooking this area though and have had a history of professional cards that have also included features and support not seen in the standard desktop arena. AMD has slowly been chipping away at Quadro’s marketshare and they hope that today’s announcement will help further that particular goal.
It has now been around five months since the initial release of the Polaris based graphics cards from AMD. Featuring the 4th generation GCN architecture and fabricated on Samsung’s latest 14nm process, the RX 4x0 series of chips have proven to be a popular option in the sub-$250 range of cards. These products may not have been the slam-dunk that many were hoping from AMD, they have kept the company competitive in terms of power and performance. AMD has also seen a positive impact from the sales of these products on the overall bottom line.
Today AMD is announcing three new professional cards based on the latest Polaris based GPUs. These range in power and performance from a sub 50 watt part up to a very reasonable 130 watts. These currently do not feature the SSD that was shown off earlier this year.
The lowest end offering is the Radeon Pro WX 4100. This is a low profile, single slot card that consumes less than 50 watts. It features 1024 stream units, which is greater than that of the desktop RX 460’s 896. The WX 4100 features 2.4 TFLOPS of performance while the RX 460 is at 2.2 TFLOPS. AMD did not specify exactly what chips were used in the professional cards, but the assumption here is that this one is a fully enabled Polaris 11.
The power consumption of this card is probably the most impressive part. Also of great interest is the DP 1.4 support and the four outputs. Finally the card supports 5K monitors at 60 Hz. This is a small, quiet, and cool running part that features the entire AMD Radeon Enterprise software support of the professional market.
The next card up is the Pro WX 5100. This features a sub 75 watt GPU that runs 1792 stream units. We guess that this chip is a cut down Polaris 10. On the desktop side it is similar to the RX 470, but that particular card features more stream units and a faster clockspeed. The RX 470 is rated at 4.9 TFLOPS while the WX 5100 is at 3.9 TFLOPS. Fewer stream units and a lower clockspeed allow it to hit that sub-75 watt figure.
It supports the same number of outputs as the 4100, but they are full sized DP. The card is full sized but still only single slot due to the very conservative TDP.
The final card is the WX 7100. This is based on the fully enabled Polaris 10 GPU and is physically similar to the RX 480. They both feature 2304 stream units, but the WX 7100 is slightly clocked down from the RX 480 as it features 5.7 TFLOPS of performance vs. 5.8 TFLOPS. The card is rated below 130 watts TDP which is about 20 watts lower than a standard RX 480. AMD did not explain to us how they were able to lower the TDP of this card, but it could be simple binning of parts or an upcoming revision of Polaris 10 to improve thermals.
This card is again full sized but single slot. It features the same 4 DP connectors as the WX 5100 and the full monitor support that the 1.4 standard entails.
These products will see initial availability for this month. Plans may of course change and they will be introduced slightly later. Currently the 7100 and 4100 are expected after the 10th while the 5100 should show up on the 18th.
AMD is also releasing the Radeon Pro Software. This is essentially their professional driver development that improves upon features, stability, and performance over time. AMD aims to release new drivers for this market every 4th Thursday each quarter.
This is certainly an important area for AMD to address with their new cards and this updated software scheme. NVIDIA has made a pretty penny over the years from their Quadro stack due to the extremely robust margins for these cards. The latest generation of AMD Radeon Pro WX cards look to stack up favorably against the latest products from NVIDIA.
The WX 7100 will come in at a $799 price point, while the WX 5100 and WX 4100 will hit $499 and $399 respectively.