Subject: Processors | January 5, 2012 - 10:12 PM | Jeremy Hellstrom
Tagged: westmere, linux, ironlake, Arrandale
It has been a busy year for Phoronix as not only have they had a lot of hardware to review, also Linux developers have been quite busy this year updating drivers and the base kernel. They decided that the beginning of 2012 was a perfect time to reflect on the effects of these changes, specifically the graphics driver that powers the Intel Core i3-330M. The results are mixed, with one driver version excelling in a single task but lagging in others. On the plus side, the performance never stays consistent which gives hope that there is still room for improvement and the performance has not plateaued.
"Back in December I posted historical Intel Sandy Bridge benchmarks looking at the graphics performance over the course of 2011 that this latest-generation of Intel hardware has been supported under Linux. In this article are some similar Intel OpenGL benchmarks of each quarter going back to the end of 2010, but this time it is for the previous-generation Intel Ironlake hardware."
Here are some more Processor articles from around the web:
- Intel Core i7 3820 Review: $285 Quad-Core Sandy Bridge E @ AnandTech
- Desktop CPU Comparison Guide @ TechARP
- Mobile CPU Comparison Guide @ TechARP
- AMD A8-3870K - Radeon HD 6550D Graphics @ Phoronix
- AMD A8-3870K Llano APU Linux Overclocking @ Phoronix
- AMD Fusion A8-3870K Overclocking and Dual Graphics Performance Review @ HardwareHeaven
- AMD A8-3870K Graphics With Gallium3D @ Phoronix
Subject: Memory | December 13, 2011 - 06:23 PM | Jeremy Hellstrom
Tagged: nehalem, westmere, lga 1366, ddr3, ddr3-2133
If you are running a triple channel motherboard you could consider an upgrade to your memory, thanks to the reduced demand for triple channel kits as well as the general lowering of RAM prices. Crucial's Ballistix DDR3-2133 6GB kit recently hit Techware Labs review desk, though it does not yet seem to be for sale. Their testing was only partially successful, the MSI Big Bang XPOWER motherboard they used was only able to push these DIMMs to 1866MHz @ 9-10-9-28. Some motherboards might be able to get these DIMMs to 2000MHz+, but even if yours cannot manage it you may be able to tighten the timings. While buying a triple channel kit seems odd for a SandyBridge system, that will be the only way you can full expect to reach the advertised speeds.
"The price of DDR3 has fallen rapidly lately, making it much more affordable to populate all of your RAM slots. Crucial introduces their new DDR3 2133 MHz Ballistix RAM in a triple channel kit. Find out if you should be using this with your i7."
Here are some more Memory articles from around the web:
- G.Skill RipjawsZ PC3-19200 16GB Kit @ Tweaktown
- G.Skill RipJawsZ 16GB 2400mhz @ Kitguru
- GeIL Enhance Corsa DDR3 and Evo Corsa DDR3 Memory Kits Review @ HardwareHeaven
- Patriot Division 4 DDR3-1600 Quad Channel Memory Review @ Neoseeker
- G.Skill RipjawsZ PC3-14900 16GB @ Tweaktown