Subject: Graphics Cards | June 1, 2013 - 01:38 PM | Tim Verry
Tagged: watercooling, nvidia, hydro copper, gtx 780, gpu, gk110, evga
EVGA GTX 780 Hydro Copper GPUs
While NVIDIA restricted partners from going with aftermarket coolers on the company's GTX TITAN graphics card, the recently released NVIDIA GTX 780 does not appear to have the same limits placed upon it. As such, many manufacturers will be releasing GTX 780 graphics cards with custom coolers. One such design that caught my attention was the Hydro Copper full cover waterblock from EVGA.
This new cooler will be used on at least two upcoming EVGA graphics cards, the GTX 780 and GTX 780 Classified. EVGA has not yet announced clockspeeds or pricing for the Classified edition, but the GTX 780 Hydro Copper will be a GTX 780 GPU clocked at 980 MHz base and 1033 MHz boost. The 3GB of GDDR5 memory is stock clocked at 6008 MHz, however. It uses a single 8-pin and a single 6-pin PCI-E power connector. This card is selling for around $799 at retailers such as Newegg.
The GTX 780 Classified Hydro Copper will have a factory overclocked GTX 780 GPU and 3GB of GDDR5 memory at 6008 MHz, but beyond that details are scarce. The 8+8-pin PCI-E power connectors do suggest a healthy overclock (or at least that users will be able to push the cards after they get them).
Both the GTX 780 and GTX 780 Classified Hydro Copper graphics cards feature two DL-DVI, one HDMI, and one DisplayPort video outputs.
The Hydro Copper cooler itself is the really interesting bit about these cards though. It is a single slot, full cover waterblock that will cool the entire graphics card (GPU, VRM, Memory, ect). It has two inlet/outlet ports that can be swapped around to accommodate SLI setups or other custom water tube routing. A configurable LED-backlit EVGA logo adorns the side of the card and can be controlled in software. A 0.25 x 0.35 pin matrix is used in the portion of the block above the GPU to increase the surface area and aid in cooling. Unfortunately, while the card and cooler are single slot, you will actually need two case PCI expansion slots due to the two DL-DVI connectors.
It looks like a neat card, and it should perform well. I'm looking forward to seeing reviews of the card and how the cooler holds up to overclocking. Buying an overclocked card with a pre-installed waterblock is not for everyone but having a water cooled GPU with a warranty will be worth it more than pairing a stock card with a custom block.
Subject: Cases and Cooling | March 4, 2013 - 01:50 PM | Jeremy Hellstrom
Tagged: watercooling, corsair, H90, H110, 140mm
The Corsair H90 and H110 use larger 140mm fans with 140mm and and 280mm radiators respectively. [H]ard|OCP compared them to also relatively recent H100i and H80i, 120mm based coolers that are controllable with Corsair's LINK technology. The comparison was rather favourable for the new 140mm coolers, with both new models beating the H100i at stocks speeds and beating their respective cousins on an overclocked chip; perhaps more importantly these two models did so with noticeably reduced sound levels. If you need serious cooling and aren't crazy about noise, these two coolers should be on your list.
"Corsair, once known only for quality enthusiast RAM modules, has successfully diversified its products reaching into cases, power supplies, processor cooling solutions. With the release of the H90 and H110 Hydro Series, we see the first new refresh in its closed loop liquid cooling systems."
Here are some more Cases & Cooling reviews from around the web:
- Corsair Hydro Series H90 Review @ OCC
- Corsair H110 CPU Cooler Review @ Hardware Secrets
- Thermalright AXP-100 Low-Profile CPU Cooler @ Tweaktown
- Corsair H90 and H110 CPU Cooler Review @ Hi Tech Legion
- Thermalright Archon SB-E X2 @ eTeknix
- Deepcool FROSTWIN CPU Cooler Review: Overclocking on a Budget @ X-bit Labs
- Cooler Master Seidon 240M CPU Cooler Review @ Hardware Canucks
- Noctua Low Profile Heatsinks @ Bjorn3D
- DeepCool IceBlade Pro V2.0 Heatsink Review @ Frostytech
- Noctua NH-L9i Low Profile Cpu Cooler @ Rbmods
- Evercool Venti CPU Cooler Review @ Hardware Secrets
- BitFenix Spectre Pro PWM and Spectre LED PWM Fan @ eTeknix
- Aerocool Strike-X X-1000 Fan Controller @ eTeknix
- CoolerMaster HAF XB @ FunkyKit
- Aerocool Strike-X Air @ Kitguru
- Fractal Design Node 304 @ LanOC Reviews
- Shuttle Barebone DS61 Review @ Madshrimps
- Cooler Master HAF XB LAN Box @ Modders-Inc
- Nox Xtreme Coolbay VX @ techPowerUp
- BitFenix Raider Case Review: All These Little Things @ AnandTech
- Fractal Design Define R4 @ LanOC Reviews
- Fractal Design Arc Midi R2 Case Review @ Hardware Secrets
- Nanoxia Deep Silence 2 Case Review @ Hardware Secrets
- Lian Li PC-7HX @ LanOC Reviews
- Thermaltake Armor Revo Full-Tower @ Funkykit
- Silverstone Raven 3 @ LanOC Reviews
- AZZA Silentium 920B Mid-Tower Chassis @ Tweaktown
- Silverstone SUGO SG09 Small Form Factor Chassis @ eTeknix
Subject: Cases and Cooling | February 13, 2013 - 07:20 PM | Jeremy Hellstrom
Tagged: corsair, Hydro Series, H80i, H100i, watercooling, Corsair Link
The updated Hydro Series coolers, the H80i and H100i both feature all new tubing that might not be much more flexible than the previous models but offers improved flow rates. As well these coolers are now able to be controlled via Corsair's Link technology, allowing you to either set the LED colour displayed or to use it as a real time temperature indicator. As you would suspect the H100i is the larger of the two units, the H80i being 120 x 38 x 152mm and the H100i measuring 275 x 120mm x 27mm with both supporting up to four fans via the Link software. [H]ard|OCP saw an improvement from the previous models which you can read about in their full review.
"Corsair updates its aging H80 and H100 performance liquid CPU coolers, with the new H80i and H100i models. Changes include a new cold plate design, smooth outer diameter no-kink tubing designed to further limit evaporation, and newer designed fans claiming better static pressures, and quieter operation."
Here are some more Cases & Cooling reviews from around the web:
- NZXT Kraken X60 CPU Cooler Review @ Hardware Secrets
- NZXT Kraken X60 @ Kitguru
- NZXT Kraken X40 & X60 CPU Coolers Review @ Hardware Canucks
- Cooler Master Seidon 120M Liquid CPU Cooler @ eTeknix
- ilverStone NT01 Pro Low Profile HTPC CPU Cooler @ eTeknix
- Evercool Silent Shark CPU Cooler Review @ Hi Tech Legion
- Thermalright Goes All In: SilverArrow SB-E Extreme Super-Cooler @ X-bit Labs
- Corsair H100i CPU Cooler Review @ Hardware Secrets
- Noctua NF-A Series 140mm Fan Review @ Hi Tech Legion
- Xigmatek Asgard 381 @ techPowerUp
- Enermax Ostrog Midi Tower PC Case Review @ NikKTech
- NZXT Phantom 820 Tower Computer Case @ Benchmark Reviews
- AZZA Silentium 920 Quiet Case Review @ Pro-Clockers
- Zalman MS800 Case Review @ Hardware Secrets
- Cooler Master HAF XB Mid-Tower @ Kitguru
- SilverStone Redline RL04 Case Review @ Hardware Secrets
- Silverstone Redline Series RL04 Chassis Review @ Pro-Clockers
- Nanoxia Deep Silence 1 Mid-Tower Case Review @ Hi Tech Legion
- Silverstone Sugo Pack @ LanOC Reviews
- Cougar Spike Mini Gaming Case Review @ Pro-Clockers
Subject: Cases and Cooling | October 31, 2012 - 05:18 PM | Jeremy Hellstrom
Tagged: watercooling, all-in-one, nzxt, Kraken X40, Kraken X60
30th October, 2012 – High performance liquid cooling has finally arrived in an easy to use, all-in-one package. NZXT releases the Kraken, the first premium all-in-one water cooler series for PC enthusiasts and gamers alike. The Kraken X40 and Kraken X60 are high end, all-in-one 140mm and 280mm liquid-cooling solutions where ease of use meets unmatched performance.
Applying its forward-thinking design philosophy to the water-cooling market, NZXT raises the bar with a userfriendly solution that brings unrivaled liquid-cooling performance to your fingertips. With 36% more surface area than standard 120mm/240mm radiators and fully interactive fan control, NZXT’s Kraken series is nothing short of a water-cooling behemoth.
NZXT brings its innovative HUE controlled lighting system to the Kraken, setting a new standard for design and performance. Featuring premium black sleeved cables and extended 16-inch tubing for large tower support, the Kraken brings high performance cooling with an uncompromised look that any enthusiast will be dying to show off.
At its core, the Kraken features a state-of-the-art pump attached to an all copper base that is compatible with all of the current offerings from Intel and AMD. Included with the 140mm Kraken X40 is one NZXT FX-140 PWM fan, with the ability to install an additional 140mm fan for a push-pull configuration, offering unmatched cooling performance.
The 280mm Kraken X60 features two NZXT FX-140 PWM fans, with the ability to install an additional two fans for a push-pull configuration as well. Additionally, the Kraken X60 utilizes a SATA power connector for easy installation and effortless cable management.
Both Krakens are aggressively priced at $99 and $139 for the X40 and X60, respectively, and backed by a 2 year warranty. With the Kraken, NZXT set out to unleash the best closed loop water cooler on the market, and believes its customers should not settle for anything less.
Subject: Cases and Cooling | October 25, 2012 - 02:15 PM | Jeremy Hellstrom
Tagged: corsair, watercooling, hydro H60, hydro H55, hydro
FREMONT, California — October 25, 2012 — Corsair, a worldwide designer and supplier of high-performance components to the PC gaming hardware market, today announced an updated version of the award-winning Hydro Series H60 liquid CPU cooler, and the new Hydro Series H55 liquid CPU cooler.
The Hydro Series H55 is an update to the hugely respected Hydro Series H50, and is based on the latest, 4th generation cold-plate design. The updated version of the Hydro Series H60 takes advantage of the latest cold plate, manifold and fan technology to further increase performance and reduce noise levels.
"The Hydro Series H50 and H60 have a hard-won reputation for delivering effective, reliable, and quiet CPU cooling,” said Thi La, Senior VP & GM of Memory and Enthusiast Component Products at Corsair. "These new and improved versions demonstrate Corsair’s commitment to providing our customers with the latest and best integrated liquid cooling technology.”
In addition to the new cold plate and manifold design, the Hydro Series H60 also utilizes larger diameter tubing, which increases the coolant flow rate and performance. The new composite rubber tubing makes installation easier, but retains the low-evaporation rates of the older, more rigid tubing, guaranteeing a long lifetime. The Hydro Series H60 also introduces a new magnetic mounting bracket, which makes it simple to select the correct motherboard socket format.
H60 Includes Fan Based on Award Winning Air Series SP120
A high-quality fan designed specifically to move air through the fins of a liquid cooling radiator is an essential part of any liquid cooling system. The new H60 includes a 120mm fan based on the award-winning Air Series SP120. This utilizes a motor that has been specially tuned for high torque, ensuring outstanding static pressure, and consistently high performance at low noise levels.
The Hydro Series H55 is designed to provide a simple and effective upgrade from a basic CPU air cooler. The 4th generation cold plate design, and high static-pressure, low noise 120mm fan provides great performance, while the tool-free mounting bracket and low-permeability rubber tubing makes installation simple.
Both the Hydro Series H55 and Hydro Series H60 CPU coolers are compatible with most cases that feature a rear 120mm fan mount. Both support motherboards based on the Intel LGA115x/1366/2011, and AMD AM2/AM3/FM1 sockets, and are backed by a five year limited warranty.
Pricing and Availability
The Corsair Hydro Series H60 is available immediately from Corsair’s worldwide network of resellers and distributors, at a price of $79.99 in the United States.
The Corsair Hydro Series H55 is available immediately from Corsair’s worldwide network of resellers and distributors, at a price of $69.99 in the United States.
Subject: Cases and Cooling | May 8, 2012 - 04:21 PM | Jeremy Hellstrom
Tagged: thermaltake, watercooling, all-in-one, WATER2.0, WATER2.0 Pro, WATER2.0 Performer
Thermaltake has just released two new all in one watercoolers, the WATER2.0 Performer and WATER2.0 Pro, available right now on NewEgg. The $70 Performer and $100 Pro are very similar, with the Pro offering dual fans and what Thermaltake describes as a Thicker Watercooler, which will offer better cooling thanks to the pair of fans. Check out the full press release below.
City of Industry, California – May 8, 2012 – Thermaltake brought water cooling technology to the mainstream in 2002 with the introduction of Aquarius and BigWater Series of liquid cooling solutions for computer enthusiasts and DIYers. The solutions were developed by garnering enthusiast communities’ experience and feedback, coupled with Thermaltake’s core expertise in thermal management. The goal was to enable PC enthusiasts to achieve higher PC performance by providing additional cooling needed in order for the CPU to run at higher frequency. Today, Thermaltake is introducing its WATER2.0 line of liquid coolers and announcing immediate availability of the all-new WATER2.0 Performer and WATER2.0 Pro all-in-one closed-loop CPU liquid coolers.
The “2.0” in the name denotes the progression and improvements that Thermaltake has made in the performance liquid cooling segment as well as the new approach which WATER2.0 solutions are taking. While traditional D.I.Y. (do-it-yourself) liquid cooling kits offer expandability, the same benefit often complicates installation and filling these coolers introduces a risk of mixing water and electronics. WATER2.0 specifically addresses these concerns by having a closed-loop design, meaning all the fluid that are required for maximum performance are pre-filled and sealed inside so the users do not need to handle any type of liquid during installation or operation.
“WATER2.0 is not a direct replacement of air cooling solutions. The all-new WATER2.0 is an improved performance-driven solution that offers added benefits of simple installation, no-maintenance and extreme reliability to the traditional liquid cooling kit. After a long period of research and development, we came to a point where WATER2.0 has reached the performance standard that Thermaltake has set forth while ensuring a fluid user experience from installation to actual operation. Now is time perfect time to discover an all-new performance-driven alternative CPU cooling solution” commented Ramsom Koay, Director of Marketing for Thermaltake.
WATER2.0 Series closed-loop CPU liquid coolers are available in three different performance categories that cater to different performance requirements or applications. The WATER2.0 Performer features dual 120mm PWM fans with a high-performance 120mm x 25mm radiator that can be mounted to any chassis with an available 120mm case fan mount. The liquid circulation is handled by a high-efficiency, low-profile pump that sits on top of the all-copper cold plate. The low-profile pump is ideal for high-performance systems where high-end air cooler may interfere with enthusiasts-grade memories that often come equipped with taller heat spreaders. A dual-PWM adapter is also included allowing both included PWM fans to be connected to a single PWM fan header on the motherboard to ensure synchronous fan speed operation.
For more performance, the WATER2.0 Pro utilizes a much thicker radiator, 49mm compared to 25mm found on the Performer model, to dramatically increase the heat-dissipating surface area by almost doubling the doubling the volume of the radiator. The WATER2.0 Pro also includes the same low-profile pump along with dual 120mm PWM fans including the dual-PWM adapter.
While all of the WATER2.0 CPU liquid coolers provide performance and low-noise operation, WATER2.0 Extreme delivers the ultimate performance by incorporating a double-long (240mm x 25mm) radiator that further increases the available heat-dissipating surface area for maximum cooling power. WATER2.0 Extreme ships standard with dual 120mm PWM fans and it is capable of supporting up to four PWM fans in push-pull configuration. Targeting enthusiasts and overclocking consumers, the WATER2.0 Extreme also comes with Smart Control Software that allows the user to monitor status of various hardware elements within the cooling unit, in addition to creating cooling profiles that best matches the user’s working and gaming environment.
“WATER2.0 Series of closed-loop CPU liquid coolers are not just new products that Thermaltake is introducing,” stated Weller Chen, Director of Product Management at Thermaltake, “WATER2.0 represent a shift in design philosophy from Thermaltake that aligns user experience in the same breath with performance, as consumers can see from the maintenance-free operation as well as simplified installation.” The WATER2.0 Performer and Pro are now available at major retailers in the United States and Canada. MSRP for WATER2.0 Performer is USD $69.99, and USD$99.99 for WATER2.0 Pro. The WATER2.0 Extreme will be available in July at major retailers with MSRP at USD $129.99. For more information, please visit the manufacturer’s product page: http://thermaltakeusa.com/Products.aspx?C=1444.
Subject: Cases and Cooling | April 11, 2012 - 05:23 PM | Jeremy Hellstrom
Tagged: zalman, CNPS 20LQ, watercooling
The Zalman CNPS 20LQ is more than just a noise prevention system, it is a self contained and maintenance free watercooling system similar to the models that Corsair and other manufacturers provide. With compatibility for socket AM2, AM2+, AMD3, AM3+, FM1, LGA1366, LGA1155, LGA 1156 and LGA2011 you should be able to use this cooler on any modern system without a worry. Overclock3D gave the cooler a try on a overclocked i7-950 and were quite impressed with the results when the fan was running at full speed, however the noise they describe being generated does not sound at all pleasant. At a reduced speed the cooler became quiet but the cooling power was also diminished. Still, they liked the cooling ability of Zalman's first foray into this particular market.
"Zalman have been in the cooler business for quite some time now and have established a name for themselves in the production of more esoteric coolers and external reserator systems. Going a bit more mainstream (if we can call sealed system liquid cooling systems mainstream) Zalman have released a stand alone maintenance free system. Combining a integral pump and head with a radiator and fan. The CNPS moniker indicates that this is badged as a "Computer Noise Prevention System" and as such we should expect low noise as well as low temperatures. Lets take a look at the vital statistics shall we."
Here are some more Cases & Cooling reviews from around the web:
- NZXT Switch 810 Tower & water cooling installation @ Hardwareoverclock
- Cooler Master TPC 812 Vertical Vapor Chamber CPU Cooler @ Pro-Clockers
- Arctic Freezer i30 CPU Cooler Review @ eTeknix
- Noctua NH-L12 Cpu cooler @ Rbmods
- Akasa Venom Voodoo Heatpipe Direct Touch Cooler Review @ Legit Reviews
- Enermax ETD-T60-TB CPU Cooler Review @ HardwareLOOK
- Prolimatech Lynx CPU Cooler Review @ VR-Zone
- NZXT HAVIK-120 @ OC3D
- Scythe Kaze Master II Fan Controller Review @ Madshrimps
- Be Quiet! Silent Wings 2 (Dark Wings DW1) Series Fan Review @ eTeknix
- Aerocool Strike X GT Black Gaming Tower @ Pro-Clockers
- In Win MANA 136 Midi Tower Review @ NikKTech
- Cougar Solution Chassis Review @ OCC
- Thermaltake Commander MS-I Snow Edition @ Kitguru/A>
- Corsair Carbide 300R Case Review @ Hardware Canucks
- SilverStone Precision PS07 Micro-ATX Case Review @ OCIA
- Bitfenix RAIDER Midi Tower Review @ NikKTech
- Corsair Obsidian 550D Quiet Mid-Tower @ SPCR
- Thermaltake Commander MS-I Case Review @ OCC
- Cougar Evolution Full Tower Review @ NikKTech
- Antec Eleven Hundred: The P280's Gloves Come Off @ AnandTech
- Cougar Evolution Chassis @ Kitguru
- Lian Li PC-100 Case Review @ Rbmods
Subject: General Tech, Cases and Cooling | April 3, 2012 - 12:01 PM | Jeremy Hellstrom
Tagged: case mods, watercooling, toilet, couric
When Google discusses using toilet water to cool a data centre, they don't exactly mean it in the way that this case mod went, but the latter is certainly easier to set up at home. Other such inventive cooling solutions have been tried, after all what good is it if the weather outside is -40o if you don't have it vented through to your PCs intake fan? However this is probably the first time someone popped a water pump into a toilet reservoir to use as an open cooling loop for a PC. With a slight change to the tubing, you could probably ensure you never have to sit down on a cold seat again. ExtremeTech has pictures of the system and its creator here.
"Hot on the heels of news that Google uses toilet water to cool one of its data centers, it has emerged that an enterprising hardware hacker had the same idea some seven years ago. As you will see in the following pictures, though, Jeff Gagnon’s computer is much more than a toilet-cooled rig — it’s a case mod tour de force."
Here is some more Tech News from around the web:
- Intel to push StudyBook tablet PC for emerging markets @ DigiTimes
- Dell To Acquire Wyse @ Slashdot
- Intel to release three more 35W Pentium and Celeron chips @ The Inquirer
- Samsung NX100 Digital Camera @ TechwareLabs
- Blackle vs. Google Monitor Power Consumption Tested @ PCSTATS
- Kingston Technology Joint Contest @ NikKTech
Subject: Graphics Cards | December 8, 2011 - 01:53 PM | Jeremy Hellstrom
Tagged: pny, GTX 580, watercooling, asetek
PNY tends to have limited releases of their graphics cards and some of them tend to be rather unique, like their new watercooled GTX580. [H]ard|OCP wanted to test the performance of this cooler in two scenarios, one with only the GTX580 taking advantage of watercooling so that there is hot air from the CPU moving around the case and a second where both the CPU and GPU are watercooled on the same loop. That makes a fair amount of difference to the amount of ambient heat present in the case, which has an effect on the efficiency of watercooling. [H]'s results are encouraging but this card does come at a price, $650 for the model that has waterblocks for both your CPU and GPU. If cooler temperatures and near silent operation are high on your list of requirements then check out what PNY has to offer.
"While PNY is not a name we have talked about when it comes to graphic cards since 2001, these guys are still around. For the most part there is nothing special about its cards, but today we have something that is special from PNY, an out-of-the box water cooled GTX 580. Let's see what it does for us."
Here are some more Graphics Card articles from around the web:
- MSI GTX 560 Ti-448 1280MB Twin Frozr III Power Edition Overclocked @ Tweaktown
- Gigabyte Geforce GTX580 Super OverClock GPU @ Funky Kit
- NVIDIA GeForce GTX 560 Ti 448 Cores Launch Roundup with SLI @ HardwareHeaven
- MSI GTX560Ti 448 - Overclock Part 2 @ OC3D
- The Current State Of Radeon Power Management @ Phoronix
- HIS 6770 IceQ X Turbo 1GB GDDR5, HIS 6750 Fan 1GB GDDR5 @ iXBT Labs
- Sapphire HD 6670 Single Slot Low Profile Video Card Review @Hi Tech Legion
- Sapphire Vapor-X HD 6850 1GB @ iXBT Labs
- Sapphire HD6870 @ Bjorn3D
- MSI R6950 Twin Frozr III 1G/OC Video Card Review @ Legit Reviews
Subject: Cases and Cooling | July 29, 2011 - 01:14 PM | Jeremy Hellstrom
Tagged: watercooling, radiator, pump, swiftech, H2O-X20 Edge Liquid Cooling System
Swiftech has assembled a full water cooling kit, including the waterblock, pump and radiator for just over $300. This is not a self contained cooler like you have seen recently from Corsair and others, this is a more traditional watercooling kit. That also means it is more powerful when properly set up, in this case you will need to have all three fans on the radiator running or the heat will not be properly dissipated. That need did prompt the only negative comment X-Bit Labs made, which is that for a watercooler this system is rather loud.
"A high-performance liquid-cooling system will definitely cool off any overclocked processors in summer heat. A system like was recently released by the American Swiftech Company. Read our new review for more details!"
Here are some more Cases & Cooling reviews from around the web:
- Corsair Hydro Series H80 Liquid CPU Cooler Review @ Legit Reviews
- Xigmatek Dark Knight CPU Cooler Review @ Hardware Secrets
- Thermalright HR-02 Macho CPU Air Cooler @ [H]ard|OCP
- Cooler Master Hyper 612 PWM Heatsink @ Benchmark Reviews
- Zalman CNPS7X LED CPU Cooler Review @ Techgage
- In Win BUC @ techPowerUp
- Thermaltake Level 10 GT Full Tower Chassis Review @ eTeknix
- SilverStone Temjin TJ11 (SST-TJ11B-W) Tower Chassis @ Tweaktown
- Thermaltake Level 10 GT: Monument to Excess @ AnandTech
- Fractal Design CORE 3000 @ techPowerUp
- BitFenix Shinobi Window Mid-Tower Case @ Bjorn3D
- Corsair Obsidian 650D: Transmuting Graphite to Obsidian @ AnandTech