Subject: Storage | September 18, 2017 - 09:35 PM | Tim Verry
Tagged: western digital, wd gold, TLER, enterprise, datacenter
Western Digital has a new mechanical hard drive for your treasure trove of digital data. Utilizing fourth generation HelioSeal technology and eight PMR platters to fit 1.5TB of data per platter, the WD121KRYZ has a capacity of 12TB and features quite a few enterprise technologies to improve reliability and reduce data loss.
The WD Gold 12TB drive is an eight-platter 3.5" drive spinning at 7200RPM paired with 256 MB of cache and featuring a SATA III interface. The helium sealed hard drive uses a dual stage actuator head positioning system that can adjust the fly height of the read-write heads in real time. Enterprise focused features include RAFF to monitor and correct linear and rotational vibrations and TLER to protect the integrity of a RAID array. The vibration monitoring Is overkill for a desktop PC or even a NAS, but can be useful in a datacenter environment where hundreds of drives are packed together. The time limited error recovery technology ensures that bad sectors do not cause a RAID rebuild to fail (and Allyn has a more in-depth explanation here).
The WD Gold 12TB is built for continuous operation with an annual workload rate of 550TB running 24/7 with a 5-year warranty and 2.5 million hours MTBF. The maximum sustained transfer is 255 MB/s. The digital hoarder’s dream is available for $521.99 from Western Digital which works out to $0.0435 / GB. If you do not want to wait for a Red Pro 12TB variant (there does not appear to be one available and WD only recently launched 10TB models), the Gold series drive might be a good option with a better warranty and lower error rate.
- Western Digital Launches 10TB Red and Red Pro
- Western Digital Reworks Enterprise Lineup, Launches 8TB Gold Datacenter HDD
- WD and HGST Refresh Enterprise SSDs to Include 8TB, Push HDDs to 12TB and Beyond
Subject: Storage | August 3, 2012 - 02:25 PM | Allyn Malventano
Tagged: western digital, WD, TLER, red, raid, hdd
This morning I received a tweet about WD Red drives not supporting Time Limited Error Recovery. TLER is the feature which allows a RAID comprised of Reds to much more gracefully handle drive failures and/or read errors. It's carried down from enterprise drives like the RE4 and RE4-GP.
I'm posting this quick note here to let the masses know that the Red drives *do* in fact support TLER. It's a primary component of NASware - the NAS aware firmware that drives the Reds. Here's the official reply I received from Western Digital:
WD does enable intelligent error recovery controls, which is not the same as a desktop drive. WD's exclusive NASware technology is built in each WD Red drive, which reduces the concern with using desktop drives in a RAID environment.
More info on details of NASware can be found here: http://www.wd.com/en/products/
Western Digital has assured me they are tracking down where the miscommunication occurred.