Lian Li’s new PC-Q39 tempered glass Mini-ITX (wide) tower

Subject: Cases and Cooling | August 16, 2017 - 06:21 PM |
Tagged: tempered glass, PC-Q39, mini-itx, Lian Li

Lian Li have released an upgrade to the PC-Q37 with the new mini-ITX PC-Q39 with tempered glass side panel and a larger internal volume.  The aluminium case will be large enough to fit a three slot GPU, with the extra width allowing a separated second chamber to house an ATX PSU of up to 160mm. 

q39-00.jpg

In addition to the PSU there is space for a pump and reservoir for watercooling as well as mounting points for two 3.5” and one 2.5” drive, allowing you to configure an unobstructed view of your components and he almost mandatory RGB LED lightshow which they produce.  If you do chose to watercool, a radiator of up to 240mm can be mounted at the top while the bottom of the case will accommodate two 120mm fans or a single 140 fan.

q39-10.jpg

The front panel has a minimalist design, the various connectors have been moved to the top of the case.  There is now a USB 3.1 Type-C plug in addition to two USB 3.1 plugs, audio jacks and a power button.  The shield at the top of the case is removable to make it easier to mount your fans or radiator as well as making it easy to clean. 

The MSRP is $210 and it is available now at NewEgg and other fine retailers.

q39-07.jpg

Click for the full PR.

Source: Lian Li
Manufacturer: BitFenix

Introduction and First Impressions

A large mid-tower design featuring tempered glass side panels and a mix of aluminum and steel exterior construction, the RGB-imbued Shogun is every bit what you would expect a ‘flagship’ enclosure from BitFenix to be. So did it get our seal of approval? Read on to find out!

DSC_0477.jpg

The BitFenix Shogun appears at first glance to be a full-tower enclosure, but it is actually using a form-factor that BitFenix calls “super mid-tower”, and it has the seven expansion slots of a mid-tower design. It supports E-ATX motherboards on down, and has some interesting features to help set it apart in a highly competitive enclosure market.

The Shogun’s compatibility with ASUS Aura motherboard lighting effects makes it a good option for the RGB lighting inclined, and there are some nice exterior touches such as the sculpted top and bottom aluminum panels and (of course) those tempered glass sides. The Shogun competes in the premium space, but is still palatable at $149 for what is on the surface a pretty impressive-looking package.

BitFenix_Shogun.jpg

The open interior and glass side panel invite impressive builds (Image credit: BitFenix)

Continue reading our review of the BitFenix Shogun Super Mid-Tower Enclosure!

Corsair's Crystal Series 570X, show off your temper

Subject: Cases and Cooling | June 15, 2017 - 01:34 PM |
Tagged: tempered glass, corsair, Crystal Series, 570x

It has been quite a while since Sebastian reviewed Corsair's Crystal Series 570X tempered glass case; so why not take another look?  Over at Techgage you can revist this case with a view.  They were impressed by the cooling included, three fans and a pre-installed fan hub for three more RGB fans as well as the air filter placements which help keep dust out of the case.  There is no equivalent feature to get fingerprints off of the glass front and sides so you will spend some time cleaning up your case.  Then again, if you are choosing a transparent enclosure, you likely spend a lot of time ensuring all your components are looking their best.

Corsair-Crystal-570X-Chassis-Final-Build-Turned-On.jpg

"Corsair’s Crystal series is named as such because of its use of tempered glass, and as the top dog in the current lineup, the 570X sports that tempered glass on all four sides. Despite its delicate frame, the chassis proved great to build with, and as we found out, its beautiful aesthetics don’t hurt its cooling efficiency."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: Techgage

Computex 2017: BitFenix Shows Off Affordable Mid-Tower With RGB and Tempered Glass

Subject: Cases and Cooling | June 3, 2017 - 11:16 PM |
Tagged: computex, bitfenix, mid tower, E-ATX Case, RGB LED, gaming, tempered glass

BitFenix had several new PC cases on display at its Computex booth, but the one that caught my eye was the sub-$100 Enso mid-tower that has some premium features including a large tempered glass side panel, RGB LED and fan controllers, removable filters, and various cable management features. The BitFenix Enso has a clean design that out of the box limits the RGB to a nice looking front panel while allowing enthusiasts to go crazy with aftermarket LED strips and LED fans if they wish.

BitFenix Enso Mid-Tower.jpg

The BitFenix Enso mid-tower (Image credit: KitGuru)

The new Enso chassis measures 8.2" x 19.2" x 14.4" (209 x 487 x 442mm).and is clad in all black with clean lines and edges that strikes a balance between boxy and gaudy (heh). The front is a smooth panel that slightly angles out (no external drive support here) with RGB LEDs in all four corners. The front I/O is up top with two USB 3.0, two audio, and power and reset buttons. The left side is almost entirely comprised of a tempered glass side panel that is held on by black thumbscrews.

The top has a mesh grill with support for two 120mm fans along with a removable magnetic fan filter. There is also room for a 120mm fan in the back and two 120mm fans up front (where there is also a removable filter that pulls out from the left side of the front panel). There is not enough room up top for a water cooling radiator up top, but there is plenty of room for up to a 240mm radiator in the front.

The bottom of the case has a compartment for the bottom mounted up to 220mm power supply (which also has a removable dust filter) and two 3.5” drives along with space to hide excess cables. This area is covered by a simple black shroud that should make cable management easier.

Dropping support for external drive bays and extra 3.5” bays, BitFenix is able to support E-ATX motherboards, long graphics cards (up to 320mm, their demo used an Asus Strix GTX 1080), and water cooling radiators in a compact mid-tower case. BitFenix states it is possible to mount a 360mm radiator in the front, but it the specifications suggest if you would be limited to two fans with matching vents.

BitFenix Enso Motherboard Tray.png

Lots of tie downs and space to hide cables! (Image credit: Bitwit Kyle)

The right side panel is blank, and removing it reveals the back of the motherboard tray. There is room for three 2.5” SSDs with one behind the motherboard and two behind the front fans. The motherboard tray has a large CPU cutout, lots of spots to tie up cables, and rubber grommets for passing cables through to the motherboard and graphics card. Having move of the components sitting behind the motherboard tray means that making a clean looking build will be a bit easier (no drive power cables to hide).

The front panel RGB LEDs are “addressable” which is to say that they can be controlled via the controller at the back or via software where BitFenix is working with Asus to allow its RGB LEDs to be controlled with its Aurora software. There is also a fan controller that looks to accept PWM and control 3-pin fans from that signal. The case is also compatible with LED fans and LEDs strips (the BitFenix demo used strips from Asus that could be controlled with the Asus software). As far as the front panel, you can choose a color or activate a gentle pulsing color change mode that cycles through the colors of the rainbow.

BitFenix Enso Showcase.png

(Image credit: Bitwit Kyle)

Out of the box, the BitFenix Enso will have the front panel LEDs and controllers, but users will need to purchase fans and/or LED strips separately. This is not necessarily bad news though because it allows enthusiasts to pick the fans and LEDs they want (or don’t want), and it also allows the case to hit the budget sub-$100 market with lots of nice DIY-friendly features.

According to a BitFenix representative, the BitFenix Enso will arrive around the end of Q3 2017 or towards the beginning of Q4 with an MSRP of $79.

It looks like an impressive budget case, and if they can hit that $79 target it should be a great value that will let you show off your DIY build without breaking the bank! From the videos at Computex, I am really liking the design as well. What are your thoughts?

Source: Tech City

The exhibitionistic Corsair Crystal 460X RGB Compact ATX should not throw rocks

Subject: Cases and Cooling | May 5, 2017 - 04:39 PM |
Tagged: tempered glass, RGB, crystal 460X, corsair

Both the front and side panel of Corsair's newest case are constructed of tempered glass, giving you an impressive view of the inside of your computer and the RGB LEDs on the cooling fans at the front.  At 480x234x512mm (18.9x9.2x20.2") it is a little more compact that other ATX compatible cases but still large enough to accept most components including a variety of radiators for watercoolers.  The PSU is located at the bottom, under a cover as are the bay for two 3.5" drives; three SSDs can be installed on the back side of the case.  [H]ard|OCP were quite enamoured with this case's looks and performance, and at $140 it is not overly expensive for a case with that much tempered glass.  That will leave you some money for the white gloves and glass cleaner you will need!

1492042065egFBjgf4Qw_1_3_l.jpg

"What do you do when a window just isn't enough? Corsair believes they have the answer in the Crystal 460X RGB case. The front and side are made of tempered glass giving you the ability to show off your pride and joy. Is it more than just a pretty face? Can the Crystal 460X RGB make a PC enthusiast happy?"

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: [H]ard|OCP

If you are going to go RGB, tempered glass is a wise choice; Corsair's Crystal 460X case

Subject: Cases and Cooling | April 6, 2017 - 01:41 PM |
Tagged: corsair, crystal 460X, tempered glass, RGB

The Corsair Crystal 460X RGB is described as a compact ATX case, at 440x220x464mm it is less deep than many ATX cases thanks to the complete lack of a standard drive cage.  It will still fit two 3.5″ drives and three 2.5″ drives hidden away on the back of the case or in line with the bottom mounted PSU.  The front and side panel are tempered glass to show of the glow of your internal components and the front fans sport LEDs which can be controlled with the six fan lighting hub. 

Check out Benchmark Reviews full article here for a closer look.

corsair_crystal_460x_rgb_stock.jpg

"If there are two big trends in computer accessories and peripherals these days, it’s “tempered glass” and “RGB illumination”. And if you can combine the two, as Corsair has done with the Crystal 460X RGB Compact ATX mid-tower case, so much the better!"

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Anidees AI Crystal Tempered Glass Chassis, so shiny it is hard to photograph

Subject: Cases and Cooling | February 13, 2017 - 01:14 PM |
Tagged: anidees, tempered glass, AI Crystal

Much like HDR displays and VR, it can be hard to show what a tempered glass case looks like with just a few pictures but that is exactly what eTeknix set out to do in this review.  The case is quite large, e-ATX motherboards are supported and the three fans at the front of the case are all 140mm as is the one in the back, with room for three more if you so desire.  There is also an integral fan controller, with the three modes easily accessible on the top of the case. The PSU is hidden under a shroud, SSDs are mounted on the back of the case and decent cable management ensure that your see-through system is worth looking at. 

DSC_2959.jpg

"There’s a big trend in the chassis market this last year or so, as more and more brands shift from plastic side panel windows, to huge chunks of tempered glass. If you really care about having a system that looks like a premium quality product, and having a great way to show off your new build and hardware, then tempered glass is the way to go."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: eTeknix

Corsair's 460X, the smaller sibling in the Crystal Series case family

Subject: Cases and Cooling | November 21, 2016 - 01:15 PM |
Tagged: atx, case, corsair, Crystal Series, enclosure, RGB, tempered glass, tower, 460X

The Corsair Crystal Series 460X RGB is very similar to the 570X model which Sebastian just posted a review of, though there are some noticeable differences.  It is slightly smaller in all dimensions, at 440x220x464mm and the removable top is metal as opposed to glass, which has also allowed the relocation to the front of the top panel controls and inputs.  The case does use the same PSU shroud as the 570X as well as suffering from the same strain of RGB disease and it will sell for $40 less than the 570X at $140.  Take a look at TechPowerUp's full review to see which of the two cases you prefer.

pressshot.png

"After the huge success of their other cases, Corsair have now released the Crystal series, which concentrates on a clean, modern design while still being functional to both air and liquid cooling enthusiasts.The first of the Crystal Series is the 460X which comes with comes with RGB fans and tempered glass."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: TechPowerUp
Manufacturer: Corsair

Introduction and Exterior

Corsair has just dropped a trio of new cases into the market, and I happen to have all of them in my secret enclosure testing bunker. While reviews for the other two are in the pipeline, the first of these to be completed is this impressive new Crystal Series 570X. Not only does this case have tempered glass galore (and an ultra-premium look and feel), but it also features customizable RGB lighting effects.

DSC_0589-2.jpg

Glass has clearly (pun intended) been trending in the case world of late, and there are more tempered glass options at affordable price points than ever. There is still room for a premium option or two, and Corsair joins the ranks of In Win for a high-style enclosure with this Crystal 570X. At first glance the case looks like it's mostly tempered glass, and for the most part the exterior is just that. Glass panels comprise front and back sides, as well as the front and top of the case. In fact, only the back and bottom panels of the Crystal 570X are steel.

DSC_0563.jpg

Here are some key points for the Crystal 570X from Corsair:

  • Four tempered glass panels on the sides of the case: Possibly the most beautiful case CORSAIR has ever made. With tempered glass enclosing the entire chassis, every component of your build is on display.
  • Customizable lighting: Light up your build with brilliant LED effects. Three included SP120 RGB LED fans and included LED controller keeps your components running cool. Each fan is equipped with vivid, configurable LED lights, enabling you to personalize your build.
  • Room for virtually anything: Mounting points for 6 case fans and fully compatible with 360mm, 280mm, and 120mm radiators. Removable fan trays in the front and top of the chassis allows for additional space or mounting cooling outside of the chassis.
  • Cable management made simple: Cable routing channels with included velcro cable straps for clean cable management.
  • Easy to clean: Easily access dust filters on front, top, and bottom mean you’ll never spend more than a minute getting dust out of your system.

DSC_0570.jpg

Continue reading our review of the Corsair Crystal Series 570X case!!

Podcast #425 - Samsung 960 EVO, NZXT S340, NVIDIA revenue, wireless Vive, Serious Sam VR, Steam VR on Linux and more!

Subject: General Tech | November 17, 2016 - 03:53 PM |
Tagged: wireless, VR, video, valve, TPCAST, tempered glass, steam, serious sam, Samsung, S340, podcast, nzxt, linux, htc, 960 EVO, 375.86

PC Perspective Podcast #425 - 11/17/16

Join us this week as we discuss new Samsung 960 EVO, NZXT S340, NVIDIA revenue, wireless Vive, Serious Sam VR, Steam VR on Linux and more!

You can subscribe to us through iTunes and you can still access it directly through the RSS page HERE.

The URL for the podcast is: http://pcper.com/podcast - Share with your friends!

Hosts:  Allyn Malventano, Josh Walrath, Jeremy Hellstrom, and Sebastian Peak

Program length: 1:13:46

  1. Week in Review:
  2. News items of interest:
  3. Hardware/Software Picks of the Week
    1. Ryan:
  4. Closing/outro

Subscribe to the PC Perspective YouTube Channel for more videos, reviews and podcasts!!