Subject: Storage | October 27, 2014 - 04:00 PM | Jeremy Hellstrom
Tagged: M.2, ssd, transcend, MTS800
M.2 is quickly gaining popularity thanks to its small size and power requirements as well as the possible speed increase and other features. Transcend's 128GB MTS800 drive features fill AES encryption, wear levelling and garbage collection as well as something new, StaticDataRefresh Technology. That is their name for a process which automatically restores the charge levels in the NAND cells which both prevents errors from accumulating as well as performance reduction over time. M.2 drives do come with a price premium, the 128GB model is available for $76 on Amazon but the performance is impressive, the lowest transfer speed The SSD Review saw during their testing was 265.61MB/s.
"We have been seeing more M.2 SSDs lately, a lot of which are companies’ first steps into the market since the form factor is so new. They have been designed to meet strict size requirements and allow for greater flexibility in product development. They are the perfect fit for mobile devices with their compact size and light weight."
Here are some more Storage reviews from around the web:
- KINGMAX M.2 2242 SATA SSD Review (128GB) @ The SSD Review
- SanDisk Ultra 2 SSD @ HardwareHeaven
- SanDisk Extreme Pro 480GB SSD @ eTeknix
- Crucial MX100 512GB & Samsung 850 Pro 256GB SSDs @ Silent PC Review
- oshiba 2.5-inch 1TB Solid State Hybrid Drive @ eTeknix
- Western Digital My Passport Pro 2 TB Portable (Thunderbolt) HDD @ TechARP
- Thecus N2560 Dual-bay SOHO NAS Review @ Techgage
- Silicon Power Armor A30 2TB USB 3.0 Portable Hard Drive Review @ NikKTech
- Silicon Power Mobile OTG X20 USB 2.0 Flash Drive Review @ Madshrimps
- Kingston HyperX Fury 64GB USB 3.0 Flash Drive Review @ NikKTech
Subject: Storage | October 6, 2014 - 02:51 PM | Jeremy Hellstrom
Tagged: ssd, slc, mlc, micron, M600, Dynamic Write Acceleration
The Tech Report took a different look at Micron's M600 SSD than Al did in his review. Their benchmarks were focused more on a performance comparison versus the rest of the market, with over two dozen SSDs listed in their charts. As you would expect the 1TB model outperformed the 256GB model but it was interesting to note that the 256GB MX100 outperformed the newer M600 in many tests. In the final tally the new caching technology helped the 256GB model perform quite well but it was the 1TB model, which supposedly lacks that technology proved to be one of the fastest they have tested.
"Micron's new M600 SSD has a dynamic write cache that can treat any block on the drive as high-speed SLC NAND. This unique feature is designed to help lower-capacity SSDs keep up with larger drives that have more NAND-level parallelism, and we've tested the 256GB and 1TB versions to see how well it works."
Here are some more Storage reviews from around the web:
- MyDigitalSSD BP4e mSATA SSD @ The SSD Review
- Top 10 SSDs: Price, performance and capacity @ The Register
- Micron M600 M.2 SATA SSD @ The SSD Review
- Some thoughts on the performance of SSD RAID 0 arrays @ Hardware Secrets
- Transcend SSD370 128GB SSD Review @ Legit Reviews
- Micron M600 SSD @ The SSD Review
- QNAP TS-653 Pro @ Legion Hardware
- QNAP SilentNAS HS-251 NAS Server Review @ NikKTech
- Mach Xtreme MX-ES Ultra SLC USB 3.0 Flash Drive @ The SSD Review
- Silicon Power Marvel M70 64GB USB 3.0 Flash Drive Review @ NikKTech
Subject: General Tech | October 2, 2014 - 02:05 PM | Ken Addison
Tagged: X99 Classified, X99, video, tlc, tegra k1, ssd, Samsung, podcast, nvidia, micron, M600, iphone 6, g-sync, freesync, evga, broadwell-u, Broadwell, arm, apple, amd, adaptive sync, a8, 840 evo, 840
PC Perspective Podcast #320 - 10/02/2014
Join us this week as we discuss the Micron M600 SSD, NVIDIA and Adaptive Sync, Windows 10 and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Jeremy Hellstrom, Josh Walrath, and Allyn Malventano
Program length: 1:27:21
Introduction and Specifications
Today Micron lifted the review embargo on their new M600 SSD lineup. We covered their press launch a couple of weeks ago, but as a recap, the headline new feature is the new Dynamic Write Acceleration feature. As this is a new (and untested) feature that completely changes the way an SSD must be tested, we will be diving deep on this one later in this article. For the moment, let's dispose with the formalities.
Here are the samples we received for testing:
It's worth noting that since all M600 models use 16nm 128Gbit dies, packaging is expected to have a negligible impact on performance. This means the 256GB MSATA sample should perform equally to its 2.5" SATA counterpart. The same goes for comparisons against M.2 form factor units. More detail is present in the specs below:
Highlights from the above specs are the increased write speeds (no doubt thanks to Dynamic Write Acceleration) and improved endurance figures. For reference, the prior gen Micron models were rated at 72TB (mostly regardless of capacity), so seeing figures upwards of 400TB indicates Micron's confidence in their 16nm process.
Sorry to disappoint here, but the M600 is an OEM targeted drive, meaning its 'packaging' will likely be the computer it comes installed in. If you manage to find it through a reseller, it will likely come in OEM-style brown/white box packaging.
We have been evaluating these samples for just under a week and have logged *many* hours on them, so let's get to it!
Subject: General Tech, Storage | September 21, 2014 - 08:41 PM | Scott Michaud
Tagged: ssd, Samsung, kingston hyper x, kingston, endurance, corsair neutron gtx, corsair, 840 pro
Many drives have died over the last year and a bit. The Tech Report has been torturing SSDs with writes until they drop. Before a full petabyte of data was written, three of the six drives kicked the bucket. They are now at 1500TB of total writes and one of the three survivors, the 240GB Corsair Neutron GTX, dropped out. This was a bit surprising as it was reporting fairly high health when it entered "the petabyte club" aside from a dip in read speeds.
The two remaining drives are the Samsung 840 Pro (256GB) and Kingston HyperX 3K (240GB).
Two stand, one fell (Image Credit: Tech Report)
Between those two, the Samsung 840 Pro is given the nod as the Kingston drive lived through uncorrectable errors; meanwhile, the Samsung has yet to report any true errors (only reallocations). Since the test considers a failure to be a whole drive failure, though, the lashings will persist until the final drive gives out (or until Scott Wasson gives up in a glorious sledgehammer apocalypse -- could you imagine if one of them lasted a decade? :3).
Of course, with just one unit from each model, it is difficult to faithfully compare brands with this marathon. While each lasted a ridiculously long time, the worst of the bunch putting up with a whole 2800 full-drive writes, it would not be fair to determine an average lifespan for a given model with one data point each. It is good to suggest that your SSD probably did not die from a defrag run -- but it is still a complete waste of your time and you should never do it.
Introduction, Specifications and Packaging
It seems a lot of folks have been incorporating Silicon Motion's SM2246EN controller into their product lines. We first reviewed the Angelbird SSD wrk, but only in a 512GB capacity. We then reviewed a pair of Corsair Force LX's (256GB and 512GB). ADATA has joined the club with their new Premier SP610 product line, and today we are going to take a look at all available capacities of this new model:
It's fortunate that ADATA was able to sample us a full capacity spread, as this will let us evaluate all shipping SSD capacites that exist for the Silicon Motion SM2246EN controller.
Subject: Storage, Shows and Expos | September 16, 2014 - 02:29 PM | Allyn Malventano
Tagged: ssd, slc, sata, mlc, micron, M600, crucial
You may already be familiar with the Micron Crucial M550 line of SSDs (if not, familiarize yourself with our full capacity roundup here). Today Micron is pushing their tech further by releasing a new M600 line. The M600's are the first full lineup from Micron to use their 16nm flash (previously only in their MX100 line). Aside from the die shrink, Micron has addressed the glaring issue we noted in our M550 review - that issue being the sharp falloff in write speeds in lower capacities of that line. Their solution is rather innovative, to say the least.
Recall the Samsung 840 EVO's 'TurboWrite' cache, which gave that drive a burst of write speed during short sustained write periods. The 840 EVO accomplished this by each TLC die having a small SLC section of flash memory. All data written passed through this cache, and once full (a few GB, varying with drive capacity), write speed slowed to TLC levels until the host system stopped writing for long enough for the SSD to flush the cached data from SLC to TLC.
The Micron M600 SSD in 2.5" SATA, MSATA, and M.2 form factors.
Micron flips the 'typical' concept of caching methods on its head. It does employ two different types of flash writing (SLC and MLC), but the first big difference is that the SLC is not really cache at all - not in the traditional sense, at least. The M600 controller, coupled with some changes made to Micron's 16nm flash, is able to dynamically change the mode of each flash memory die *on the fly*. For example, the M600 can place most of the individual 16GB (MLC) dies into SLC mode when the SSD is empty. This halves the capacity of each die, but with the added benefit of much faster and more power efficient writes. This means the M600 would really perform more like an SLC-only SSD so long as it was kept less than half full.
As you fill the SSD towards (and beyond) half capacity, the controller incrementally clears the SLC-written data, moving that data onto dies configured to MLC mode. Once empty, the SLC die is switched over to MLC mode, effectively clearing more flash area for the increasing amount of user data to be stored on the SSD. This process repeats over time as the drive is filled, meaning you will see less SLC area available for accelerated writing (see chart above). Writing to the SLC area is also advantageous in mobile devices, as those writes not only occur more quickly, they consume less power in the process:
For those worst case / power user scenarios, here is a graph of what a sustained sequential write to the entire drive area would look like:
Realize this is not typical usage, but if it happened, you would see SLC speeds for the first ~45% of the drive, followed by MLC speeds for another 10%. After the 65% point, the drive is forced to initiate the process of clearing SLC and flipping dies over to MLC, doing so while the host write is still in progress, and therefore resulting in the relatively slow write speed (~50 MB/sec) seen above. Realize that in normal use (i.e. not filling the entire drive at full speed in one go), garbage collection would be able to rearrange data in the background during idle time, meaning write speeds should be near full SLC speed for the majority of the time. Even with the SSD nearly full, there should be at least a few GB of SLC-mode flash available for short bursts of SLC speed writes.
This caching has enabled some increased specs over the prior generation models:
Note the differences in write speeds, particularly in the lower capacity models. The 128GB M550 was limited to 190MB/sec, while the M600 can write at 400MB/sec in SLC mode (which is where it should sit most of the time).
We'll be testing the M600 shortly and will come back with a full evaluation of the SSD as a whole and more specifically how it handles this new tech under real usage scenarios.
Subject: Storage, Shows and Expos | September 9, 2014 - 02:00 PM | Allyn Malventano
Tagged: ssd, SMR, pcie, NVMe, idf 2014, idf, hgst, hdd, 10TB
It's the first day of IDF, so it's only natural that we see a bunch of non-IDF news start pouring out :). I'll kick them off with a few announcements from HGST. First item up is their new SN100 line of PCIe SSDs:
These are NVMe capable PCIe SSDs, available from 800GB to 3.2TB capacities and in (PCI-based - not SATA) 2.5" as well as half-height PCIe cards.
Next up is an expansion of their HelioSeal (Helium filled) drive line:
Through the use of Shingled Magnetic Recording (SMR), HGST can make an even bigger improvement in storage densities. This does not come completely free, as due to the way SMR writes to the disk, it is primarily meant to be a sequential write / random access read storage device. Picture roofing shingles, but for hard drives. The tracks are slightly overlapped as they are written to disk. This increases density greatly, but writting to the middle of a shingled section is not possible without potentially overwriting two shingled tracks simultaneously. Think of it as CD-RW writing, but for hard disks. This tech is primarily geared towards 'cold storage', or data that is not actively being written. Think archival data. The ability to still read that data randomly and on demand makes these drives more appealing than retrieving that same data from tape-based archival methods.
Further details on the above releases is scarce at present, but we will keep you posted on further details as they develop.
Subject: Storage | September 5, 2014 - 03:06 PM | Jeremy Hellstrom
Tagged: roundup, ssd
The SSD Review has put a quick overview of what they feel are the best SSDs released this summer in several classes, though picking the Intel P3700 PCIe SSD which is not slated for release until the end of September might be considered cheating a bit. It is no surprise that the Samsung 850 Pro is the Enthusiast recommendation or the Crucial MX100 being recommended for those with a tight budget. They also list M.2, mSATA and even USB recommendations so head on over to see the full round up.
"Summer has come and gone, and over the past few months, there have been quite a few SSDs released into the market, and the question of, "Which SSD should I buy?" seems to still come up a lot around forums. Usually, there are some predetermined recommended favorite in each."
Here are some more Storage reviews from around the web:
- Crucial MX100 256 GB @ techPowerUp
- Plextor M6S 256GB @ eTeknix
- Plextor M6M 128GB mSATA @ eTeknix
- Transcend SSD370 SSD @ The SSD Review
- Samsung 850 Pro 512GB SSD Review @ NikKTech
- MyDigitalSSD Super Cache 2 128GB SATA III M.2 Drive Review @ Legit Reviews
- ioSafe 214 Fire and WaterProof NAS Video Review @ Madshrimps
- Synology DS115j @ HardwareHeaven
- QNAP TurboNAS TS-470 Pro NAS Server Review @ NikKTech
- WD My Passport Wireless 1TB Storage Drive Review @ Legit Reviews
- Western Digital My Passport Ultra Review @ TechwareLab
- WD My Passport Wireless Review – Your Own Hand-Held Personal Cloud @ Techgage
- Corsair Voyager Air 2 1TB Wireless Hard Drive @ eTeknix
- Western DIgital My Cloud EX2 Review @ TechwareLabs
- Silicon Power Armor A60 2TB USB 3.0 Portable Hard Drive Review @ NikKTech
- Corsair Flash Voyager GTX USB 3.0 128GB Flash Drive Review @ Madshrimps
Introduction, Specifications and Packaging
We first looked at the Silicon Motion 2246EN controller in our Angelbird SSD wrk review. In that review, we noted the highest sequential performance seen in any SATA SSD reviewed to date. Eager to expand our testing to include additional vendors and capacities, our next review touching on this controller is the Corsair Force LX series of SSDs. The Force LX Series is available in 128GB, 256GB, and 512GB capacities, and today we will look at the 256GB and 512GB iterations of this line: