Subject: Storage | January 10, 2018 - 08:17 PM | Tim Verry
Tagged: sm2258xt, SM2258, sata 6Gbs, sata 3, Mushkin, M.2 SATA, CES 2018, CES, 3d nand
In addition to the PCI-E based solid state drives it showed off at CES, Mushkin is adding two new SATA-based SSDs to its Triactor series. The new Triactor 3DL and Triactor 3DX are M.2 and 2.5" form factor SSDs respectively that are available in 120 GB, 250 GB, 500 GB, and 1 TB capacities and utilize 3D TLC NAND flash memory and SMI controllers. Both drives come with M.E.D.S. wear leveling and data protection algorithms and three-year warranties.
The Triactor 3DL is a M.2 2280 form factor SSD that uses a SMI SM2258XT controller with a SATA 3.1 6 Gbps interface. The SM2258XT is a four-channel controller that lacks a DRAM cache. The Triactor 3DL is rated at up to 550 MB/s sequential reads, 505 MB/s sequential writes, 73,000 random 4k read IOPS and 80,000 random 4k write IOPS. Its data protection features include LDPC ECC and algorithms for data shaping, StaticDataRefresh, and wear leveling. While not as impressive as its NVMe M.2 counterparts, it should be a good bit cheaper and compatible with more PCs especially as an upgrade path for older notebooks.
On the other hand, the Triactor 3DX is a more traditional SATA drive that comes in a 2.5" form factor (7mm thick). In this case the 3D TLC NAND flash is paired with a SMI SM2258 controller which is similar to the one above except that it can utilize a DRAM cache and supports AES encryption. The Triactor 3DX is rated at 565 MB/s sequential reads, 530 MB/s sequential writes, 100,000 random 4k read IOPs, and 91,000 random 4k write IOPS. It seems that the cache is helping performance a bit, and the drive is starting to bump up against the real-world limits of the SATA 6 Gbps interface. Since it is of the thinner 7mm type, it will be compatible with most notebooks and desktops.
The new Triactor drives are cheaper options that come in M.2 as well as traditional SATA drives. Mushkin is not talking pricing or availability just yet.