Subject: General Tech | July 3, 2018 - 05:55 PM | Tim Verry
Tagged: SoC, SFF, sapphire, ryzen v1000, ryzen embedded, ryzen, APU, amd
Sapphire Technologies is now partnering with AMD to offer up a new small(ish) 5"x5" form factor system for embedded applications featuring AMD's Ryzen Embedded V1000 SoC APUs. The Sapphire FS-FP5V is a 5.8"x5.5" motherboard that pairs the V1000 SoC with Zen CPU cores and Vega GPU with dual channel DDR4 3200 MHz SODIMM memory slots, two M.2 slots, a single SATA 3 port, dual Ethernet, and four DisplayPort outputs supporting up to four 4K displays.
The 5x5 motherboard uses a V1000 APU that is soldered to the board though the website does not specify which model Sapphire is using. The V1000 series includes APUs ranging from 12W to 54W with up to four (Zen) cores / 8 threads, a Vega-based GPU with up to 11 CUs, 2MB L2 cache, and 4MB shared L3 cache. The SoC further has AMD's PSP security processor and support for dual 10GbE though Sapphire's board only uses two Gigabit NICs (Realtek RTL8111G). Realtek chips are also used for the four channel audio solution (ALC262). The M.2 2280 can operate in PCI-E 3.0 x4 or SATA modes while the smaller M.2 2242 slot uses PCI-E x1 and can accommodate Wi-Fi cards or smaller SSDs. The FS-FP5V board also features serial RS232 and GPIO support and the motherboard is powered by a single 19V DC input.
Rear I/O includes two USB 2.0 ports (there's also one on the front), one USB 3.1 Type-C, four DisplayPort outputs, two RJ-45 GbE jacks, and a single audio output.
Sapphire plans to sell its new 5x5 board to system integrators as well as directly through their website. A video from AMD shows off the board as well as examples from Sapphire partners of SFF cases and 2x2 display walls. The new platform is aimed at video gaming systems (think casinos, arcades, and video gambling machines in bars), digital signage, large display walls, point of sale systems, and medical imaging (high resolution display outputs for medical scanning and diagnostics devices). There is no word on pricing or availability, but if you are interested there is a form you can fill out to get more information. It is nice to see AMD getting some design wins in the SFF space even if its not in consumer products yet (it's time for an AMD NUC competitor).
Update: Tom's Hardware managed to get their hands on some pricing details which show Sapphire will offer four models that vary by Ryzen Embedded processor used including:
- Ryzen Embedded V1202B (2 core / 4 thread + Vega 3) for $325
- Ryzen Embedded V1605B (4 core / 8 thread + Vega 8) for $340
- Ryzen Embedded V1756B (4 core / 8 thread + Vega 8) for $390
- Ryzen Embedded V1807B (4 core / 8 thread + Vega 11) for $450
The first two options are 12W to 25W TDP SoCs while the latter two are 35W to 54W processors. The V1202B is clocked at 2 GHz base and up to 3.6 GHz. Moving up to the V1605B gets two more cores at an every so slightly higher 2.06 GHz base and moves from Vega 3 to Vega 8 graphics (though still at the same 1,100 MHz clockspeeds). Stepping up to the V1756B gets a processor with a much higher 3.25 GHz base but hte same maximum boost and graphics as the V1605B. Finally, moving to the flagship V1807B SoC gets an APU clocked at 3.35 GHz base and 3.8 GHz boost with Vega 11 graphics clocked at 1,300 MHz. The boards will reportedly be available later this year (relatively soon) while the UDOO Bolt will be available next year at similar price points. In all the Sapphire board seems like a decent deal for setting up a homelab or media box (though I wish the storage situation was better) while the UDOO Bolt board is aimed more at developers and makers with the inclusion of Aruino pinouts and eMMC storage (The UDOO appears to top out at the V1605B chip as well.)
(End of Update.)