$170 for 16GB of very overclockable DDR4-2666

Subject: Memory | May 26, 2015 - 06:22 PM |
Tagged: ddr4-2666, G.Skill, Ripjaws 4

The price may still sting a bit but honestly, it is only about a small premium over many 16GB DDR3 kits so the pricing on DDR4 is getting much better.  G.Skill's 16GB DDR4-2666 quad channel kit has timings of 15-15-15-35 and are fully XMP compliant so getting them out of the clamshell packaging may be the hardest step in installing them.  Of course many readers here, just like at Bjorn3D, are not going to be satisfied with the default settings which brings us to the overclocking results.  3048MHz @ 16-16-16-37 was perfectly stable in their testing at 1.35V and for those who don't mind the long term effects of upping the voltage to 1.4V there is more headroom left. 

G.Skill_Ripjaws_4_2666_41-700x650.jpg

"G.Skill has been churning out enthusiast memory that overclocks like nothing else we’ve ever seen. Pop a set of Ripjaws 4 into your dream machine and settle into the BIOS for an overclocking experience like you’ve never had!"

Here are some more Memory articles from around the web:

Memory

Source: Bjorn3D

G.Skill's Ripjaws 4; fast and relatively affordable memory for your Haswell-E system

Subject: Memory | April 27, 2015 - 04:45 PM |
Tagged: ddr4-3200, G.Skill, Ripjaws 4, 16GB

At $450 for 16GB of DDR4-3200, G.Skill's Ripjaws 4 kit is very well priced for DDR4 of that speed, especially if you like the active cooling fans.  This particular kit is has timings of 16-16-16-36 with a 2T command rate. It also requires an impressive 1.35V to hit full speed, well above the 1.2V specification but in line with many of the other DDR4 enthusiast kits.  Indeed when Hardware Canucks started their overclocking tests they raised that to 1.4V and managed a variety of tighter timings with reduced clock speed; worth noting is that all of those overclocks were successful when using a 1T command rate.  Check out their full review here and don't forget to sign up for our contest!

GSKILL_RIPJAWS4_DDR4-3200_27.jpg

"G.Skill's Ripjaws 4 DDR4-3200 16GB kit gives Haswell-E buyers an excellent combination of price, out-of-box performance and overclocking abilities. It has everything you could possibly want in a DDR4 kit."

Here are some more Memory articles from around the web:

Memory

Can you see the difference between these DDR4-3000 DIMMs?

Subject: Memory | October 20, 2014 - 02:12 PM |
Tagged: Vengeance LPX, corsair, Ripjaws 4, G.Skill, hyperx predator, kingston, ddr4, DDR4-3000

With the new DDR4 standard comes new speeds and of course updated branding from the major memory resellers.  As it is brand new there is a possibility that some memory is better than others at this point, which is why Kitguru assembled three different kits to test.  Corsair's Vengeance LPX, G.Skill's Ripjaws 4 and Kingston's HyperX Predator all have very similar specifications on paper though each has a distinctive look.  Read on to find out if there is a brand that you should be looking for right now, or if it is price and availability which should drive your purchasing decision.

DDR4-post-image-3_.jpg

"One of the key technological advancements that the Haswell-E processors and Intel’s latest High-End Desktop (HEDT) platform iteration have brought into the consumer limelight is DDR4. We compare three 16GB quad-channel memory kits from Corsair, G.Skill, and Kingston, all running at 3000MHz. Is there a specific set of ‘go-to’ memory at this early point in the DDR4 life-cycle?"

Here are some more Memory articles from around the web:

Memory

 

Source: KitGuru