Subject: Memory | August 20, 2016 - 01:25 AM | Tim Verry
Tagged: X99, Samsung, ripjaws, overclocking, G.Skill, ddr4, Broadwell-E
Early this week at the Intel Developer Forum in San Francisco, California G.Skill showed off new low latency DDR4 memory modules for desktop and notebooks. The company launched two Trident series DDR4 3333 MHz kits and one Ripjaws branded DDR4 3333 MHz SO-DIMM. While these speeds are not close to the fastest we have seen from them, these modules offer much tighter timings. All of the new memory modules use Samsung 8Gb chips and will be available soon.
On the desktop side of things, G.Skill demonstrated a 128GB (8x16GB) DDR4-3333 kit with CAS latencies of 14-14-14-34 running on a Asus ROG Rampage V Edition 10 motherboard with an Intel Core i7 6800K processor. They also showed a 64GB (8x8GB) kit clocked at 3333 MHz with timings of 13-13-13-33 running on a system with the same i7 6800K and Asus X99 Deluxe II motherboard.
G.Skill demonstrating 128GB DDR4-3333 memory kit at IDF 2016.
In addition to the desktop DIMMs, G.Skill showed a 32GB Ripjaws kit (2x16GB) clocked at 3333 MHz running on an Intel Skull Canyon NUC. The SO-DIMM had timings of 16-18-18-43 and ran at 1.35V.
Nowadays lower latency is not quite as important as it once was, but there is still a slight performance advantage to be had tighter timings and pure clockspeed is not the only important RAM metric. Overclocking can get you lower CAS latencies (sometimes at the cost of more voltage), but if you are not into that tedious process and are buying RAM anyway you might as well go for the modules with the lowest latencies out of the box at the clockspeeds you are looking for. I am not sure how popular RAM overclocking is these days outside of benchmark runs and extreme overclockers though to be honest.
Overclocking Innovation session at IDF 2016.
With regards to extreme overclocking, there was reportedly an "Overclocking Innovation" event at IDF where G.Skill and Asus overclocker Elmor achieved a new CPU overclocking record of 5,731.78 MHz on the i7 6950X running on a system with G.Skill memory and Asus motherboard. The company's DDR4 record of 5,189.2 MHz was not beaten at the event, G.Skill notes in its press release (heh).
Are RAM timings important to you when looking for memory? What are your thoughts on the ever increasing clocks of new DDR4 kits with how overclocking works on the newer processors/motherboards?
Subject: General Tech | February 1, 2016 - 12:48 AM | Tim Verry
Tagged: ripjaws, RGB LED, mechanical keyboard, G.Skill, Cherry MX
Memory maker G.Skill recently announced a refresh of its mechanical keyboard line that tweaks the KM780 series and cuts $10 off of the MSRP pricing. The two new refreshed products are the Ripjaws KM780R RGB and KM780R MX.
The new keyboards use an aluminum plate/base, Cherry MX switches, and a black anodized finish on the frame. The KM780R MX is backlit by red LEDs while the KM780R RGB can have custom per-key backlighting. Both feature a full QWERTY layout plus number pad as well as media playback keys, a LED volume level display, and six macro keys (three on-board key profiles). There is also USB and analog audio pass-through ports.
G.Skill is offering the new gaming keyboards in several models depending on your choice of key switch. Specifically, users can choose from Cherry MX blue, brown, or red switches. Connecting via USB, they employ anti-ghosting and full N-key rollover tech as well.
The every so slightly cheaper KM780R series does away with its predecessors bundled extra gaming key caps and key removal tool. The KM780R MX has an MSRP of $120 while the KM780R RGB model has an MSRP of $159.99 (Note that the brown and red variants are actually $140 on Amazon right now, but the Cherry MX blue version is not on sale.)
While I have not used them, the original models from last year appear to have garnered quite a bit of praise in reviews (particularly from AnandTech). It seems like G.Skill has not changed much and the R variants are more of the same for a bit less, and that's probably a good thing. I'm looking forward to seeing full reviews though, of course.
Have you tried the memory giant's other products before?
Also read: Mechanical Keyboard Switches Explained and Compared by Scott Michaud @ PC Perspective
Subject: General Tech | October 30, 2015 - 07:03 PM | Jeremy Hellstrom
Tagged: input, MX780 RGB, G.Skill, ripjaws
Trying to keep branding straight in your mind is not an easy task, especially when companies mix old branding from competitors with their own current branding for a completely different type of product. Branding aside, the G.SKILL Ripjaws MX780 sports eight fully customizable buttons and the height, length and width of much of the mouse can be adjusted via screws as we first saw back in the Cyborg Rat 7 and other similar devices. The software from G.SKILL allows you to program the buttons, polling rate, DPI sensitivity and the seven different LEDs on the mouse. Check out how well the mouse performs at Overclockers Club.
"The main problem I found with this mouse is with using cloth mouse pads – lifting the mouse would cause it to stop working momentarily when sat back down as if it were recalibrating. Using a hard surface the mouse worked perfectly. I used a Ratpadz hard pad, an XTracGear Ripper cloth pad, and a Corsair Gaming Mouse Mat cloth pad. Only the hard plastic pad worked reliably when lifting the mouse and setting it down."
Here is some more Tech News from around the web:
- Razer BlackWidow Ultimate 2016 Edition @ Bjorn3d
- Cooler Master Xornet II @ Kitguru
- MSI ThunderStorm Review: Your Desk on Top of Desk @ Modders-Inc
- Logitech G920 Driving Force Racing Wheel @ Legion Hardware
- Cooler Master Quickfire Rapid-i Keyboard @ Benchmark Reviews
- Ozone Strike Pro Keyboard Review: Clarity of Purpose @ Modders-Inc
- Tesoro Excalibur Spectrum RGB Mechanical Keyboard Review @ OCC
- ThermalTake Poseidon Z Keyboard @ Kitguru
Subject: General Tech | October 8, 2015 - 06:02 PM | Jeremy Hellstrom
Tagged: cherry mx brown, G.Skill, ripjaws, KM780, input, mechanical keyboard
G.SKILL has extended their Ripjaws family beyond RAM with the introduction of the KM780, a mechanical keyboard sporting some unique features. For lighting enthusiasts the Cherry MX Brown keys are clear instead of black which allows the backlighting to show through significantly more than on other boards. There is a bar at the back of the keyboard which adds an interesting aesthetic and allows for a cord holder to be incorporated into the design. As well, not only can you program macros using the software there are keys which can be depressed to allow you to program a macro on the fly while playing a game. The lighting is perhaps a bit much for some but if you are a fan of keyboards that are seen and not heard you should check out the full review at Overclockers Club.
"Upon first look at the KM780, I was taken aback by the design. The bars looked odd to me, but in use they didn't bother me, in fact I had many ideas as to possible uses for them including using them as tie downs for traveling, such as to LAN parties, and for locking the keyboard down to a surface using clamps on the bars – great for systems where the keyboard will move a lot such as gaming PC chair rigs."
Here is some more Tech News from around the web:
- TteSports Commander Gaming Gear Combo Keyboard & Mouse @ eTeknix
- Element Gaming Beryllium Mechanical Gaming Keyboard @ eTeknix
- E-Blue Mazer K727 Mechanical Keyboard @ Modders-Inc
- Evoluent VerticalMouse 4 Review @ Hardware Secrets