Subject: Storage | April 16, 2018 - 10:11 PM | Allyn Malventano
Tagged: x300, V300, toshiba, s300, P300, N300, L200, hdd
Today (well, tonight) Toshiba changed up their HDD branding to make things a bit easier to grasp for the consumer, as well as adding surveillance and video streaming models to their lineup:
Toshiba chose to go with a round of colors, but these are notably different than what you have previously seen from WD. Typical desktop and mobile drives now carry a red label, with their performance desktop model going grey. NAS HDDs are yellow, and the two new items are blue and green. Let's take a closer look at these new additions:
The blue 'Video Stream V300' model comes in up to a 3TB capacity and is firmware optimized for handling multiple (4) simultaneous video streams without thrashing the heads constantly seeking between tracks. This is a low RPM drive and is meant more for use in DVRs. Max capacity comes in only 3TB, but this is a very low cost and low power drive. Note the 'annual workload rating' of 72TB per year. More on that later.
The green 'Surveillance S300' model is meant for significantly more demanding workloads upwards of 64 simultaneous HD video camera streams. These are meant for incorporation into large arrays and come with the necessary RV (accelerometer) sensors to help keep the heads on track while the drive is subjected to harsher vibrations seen in large server chassis. These come in up to 10TB with a workload rating of 150TB per year.
Above are the general specs across the entire lineup, and below are the prices for the two new models:
- V300 Video Streaming
- 1TB - V300 Video Streaming - $49.99
- 2TB - V300 Video Streaming - $69.99
- 3TB - V300 Video Streaming - $89.99
- S300 Surveillance
- 4TB - S300 Surveillance - $119.99
- 5TB – S300 Surveillance - $149.99
- 6TB - S300 Surveillance - $189.99
- 8TB - S300 Surveillance - $249.99
- 10TB - S300 Surveillance - $349.99
Those prices look very competitive, but that 'annual workload rating' troubles me a bit, especially for the S300. That model is meant for use in an array, which must be initialized (eating one full drive write), possibly migrated (eating another full drive capacity worth of access), and with some RAID controllers, periodically scrubbing the data to verify integrity. A large array of 10TB HDDs with periodic array scrubbing/integrity checking scheduled every 2-3 weeks will technically run these parts past their rated workload. Backing off to monthly checks will get you just under the limit, provided your actual video workload does not push you over. Just something to consider when specing out a surveillance unit build.
Press blast for these new models appears after the break.