Subject: Cases and Cooling | December 16, 2015 - 07:01 AM | Scott Michaud
Tagged: MSI Die Guard, MSI CPU Guard, msi
Personally, I am running a Haswell CPU (“Devil's Canyon”). I don't have any experience with building Skylake-based systems. A few of my coworkers at PC Perspective do, though. They seem to think that the issue is a bit out-of-proportion, except maybe in situations where a PC with a large CPU cooler needs to be transported. Also, Morry has used a similar product, the MSI Die Guard, with his delidding project for QuakeCon 2014, and it failed to prevent his die from cracking. Granted, protecting a bare die is much different from bracing a CPU that still has its heatspreader.
Image Credit: MSI
Those two issues should be kept in mind, though. We're skeptical of the problem in general and, even then, the one time that we used a similar product, it didn't (entirely) do what it was supposed to. Again, none of these situations involved me, personally.
Image Credit: MSI
But now onto the announcement. MSI is releasing the CPU Guard 1151 for new Skylake-based processors. It also works as a “die guard” too, so if you intend on popping the headspreader off, you don't need to choose between two parts. This supposedly works in either scenario. It clamps the processor into the socket, although I can't see how it would do much more than an 1151 socket (and its clamp) itself. MSI did use it during an overclocking competition though, on a delidded Skylake, so there's that.
No pricing or availability are yet available. It could be something to look out for, especially if you haven't installed your processor yet. If you have, you would then need to think about the effort to undo whatever you already have to install this. It's up to you.
Subject: Graphics Cards | December 8, 2015 - 03:56 PM | Jeremy Hellstrom
Tagged: msi, GTX 980 Ti SEA HAWK, 980 Ti, 4k
[H]ard|OCP recently wrapped up a review of the MSI GTX 980 Ti SEA HAWK and are now revisiting the GPU, focusing on the performance at 4K resolutions. The particular card that they have tops out at 1340MHz base and a 1441MHz boost clock which results in an in-game frequency of 1567MHz. For comparison testing they have tested their overclocked card against the SEA HAWK at the factory overclock and a regular 980 Ti at 4k resolution. Read on to see if this watercooled 980 Ti is worth the premium price in the full review.
"Our second installment with the MSI GTX 980 Ti SEA HAWK focuses in on gameplay at 4K and how viable it is with the fastest overclocked GTX 980 Ti we have seen yet. We will be using a reference GeForce GTX 980 Ti to show the full spectrum of the 980 Ti’s performance capabilities and emphasize the MSI GTX 980 Ti SEA HAWK’s value."
Here are some more Graphics Card articles from around the web:
- Gigabyte GTX 980 Ti Waterforce Xtreme Gaming 6 GB @ techPowerUp
- XFX R9 Fury Pro Triple Dissipation @ Bjorn3d
- PowerColor PCS+ R9 380X Myst Edition Review @ OCC
- Sapphire Radeon R9 Nitro 380X @ Kitguru
- Radeon Settings: Crimson Edition Performance Analysis @ eTeknix
- Radeon R9 Nano Small Form Factor Overclocking @ [H]ard|OCP
Subject: Motherboards | December 1, 2015 - 11:02 AM | Sebastian Peak
Tagged: Z170, Rainbow Six Siege, msi, motherboard, KRAIT GAMING R6 SIEGE, krait gaming, krait
MSI has announced a partnership with Ubisoft and introduced a specially designed motherboard, the Z170A KRAIT GAMING R6 SIEGE, which includes a free copy of Tom Clancy’s Rainbow Six Siege (Standard Edition).
"With this new model you will receive a free copy of Tom Clancy’s Rainbow Six Siege [Standard Edition]. But that’s not all, during this exclusive promotion MSI is also giving away a free copy of the game with the Z170A GAMING M5 motherboard. The promotion starts on Tuesday 1st of December, 2015."
The motherboard is based on the current Z170A KRAIT EDITION, and this new R6 SIEGE design offers the same gaming-oriented featues such as DDR4 Boost, Intel LAN, and high-end audio components, and both feature USB 3.1 Gen 2 support with Type-C and Type-A ports.
No specifics on pricing/availability just yet.
Subject: Cases and Cooling | November 29, 2015 - 07:01 AM | Scott Michaud
Tagged: thermaltake, msi, CPU Water Block, cooler
Normally a water block presses against the CPU heatspreader, but this one is a bit different. MSI and Thermaltake decided to team up and make a motherboard-specific cooler that pulls heat away from the CPU and the motherboard's VRM MOSFETs. This way, water chills both the CPU and its power delivery, which could be a bottleneck when overclocking.
Note that this is not a closed-loop cooler. It is designed to be embedded in a custom cooling loop, which means that the user (or a small business computer store that maintains their PC) is responsible for routing water and preventing leaks. That said, users who are looking for a high-quality cooler for their power delivery system should expect a little commitment to their build (and a little risk).
Also, since the product is designed for a specific motherboard, the user shouldn't expect to keep it hanging around from build to build. You will almost definitely use it while you have it and leave it when you move on. On the other hand, you shouldn't worry about it covering your RAM or anything -- you can be reasonably assured that it's built for your setup. (That is, unless you buy the wrong motherboard or something... d'oh!)
Subject: General Tech | November 15, 2015 - 01:44 AM | Tim Verry
Tagged: msi, cubi n, SFF, fanless, Braswell, Intel Braswell
MSI will soon add a new small form factor PC to its Cubi lineup with the fanless Cubi N. Powered by an Intel “Braswell” SoC, the Cubi N is a silent PC capable of 4K video playback that fits in the palm of your hand.
Unlike the original Cubi bare-bones (which used a Broadwell Celeron), the Cubi N is fanless and uses a heatsink and a stylized wavy mesh case design for passive heat dissipation. The mini PC measures 116mm x 112mm x 44.47mm and is all black with rounded corners. The diagonal cut is gone from this model with the power button being in the front-left top corner instead.
Before diving into the internals, MSI has included two USB 3.0 ports and a combo headphone/mic audio jack on the front panel and HDMI, VGA, RJ45, and an additional two USB 3.0 ports on the back of the Cubi N.
Not bad, but not the most extensive I/O and the VGA output is a bit of an odd choice (though at this point it should be essentially free to add).
Internally, MSI is using an Intel “Braswell” Celeron N3150 SoC with Intel HD Graphics. This SoC (6W TDP) is a four core 1.6 GHz part that can boost up to 2.08 GHz with 2MB L2 cache and HD Graphics with 12 execution units. Users can add up to 8GB of DDR3L memory along with a single mSATA SSD and one 2.5” hard drive (though this makes the PC a bit taller at 55.5mm). The Cubi N comes with an Intel 802.11ac Wi-Fi card plugged into an M.2 slot.
The Cubi N will come in black or white and will be generally available as a bare-bones system. According to FanlessTech, pre-configured models will also be available including a version with a 32GB mSATA SSD, 2GB RAM, and Windows 10 Home for $249. MSI is allegedly also working on bare-bones models based around the Braswell Pentium N3700 (2.4 GHz burst) and a cheaper Celeron N3000 processors.
The fanless SFF Cubi N is not yet available for purchase, but it should be coming soon for under $400 all-in (adding storage and memory, more if you want a non-Home version of Windows).
Subject: Motherboards | November 6, 2015 - 02:00 PM | Jeremy Hellstrom
Tagged: Z170A Gaming M7, msi, LGA 1151, Intel
At $220 currently the MSI Z170A Gaming M7 sits comfortably between a value board and a flagship model. The heatsinks not only look good but provide decent cooling as well, as [H]ard|OCP points out in their review. As far as connectivity goes, this board has a half dozen SATA 6Gbps ports, two SEx ports and two M.2 slots along with a total of seven USB 2.0 ports, six USB 3.0 ports and a pair of USB 3.1 ports, one of which has a Type-C connection. There are three PCIe 3.0 slots, x16 in design and capable of running x8/x8/x4 when all populated, with another four 1x slots for an impressive total number of slots. Check out the overclocking performance and the new UEFI which replaces the old Click BIOS in the full review.
"MSI has changed gears as of late vowing to be the number one motherboard manufacturer in the "gaming" segment. While a "gaming" motherboard MSI is still focused on overclocking with this model. We look at the Z170A Gaming M7 to see if it brings MSI one step closer or a step away from that very goal."
Here are some more Motherboard articles from around the web:
Subject: Motherboards | November 3, 2015 - 04:00 AM | Sebastian Peak
Tagged: Z170A SLI PLUS, X99 SLI PLUS, sli, msi, motherboard, crossfire, black PCB
MSI has announced their third PRO Series motherboard, the all-black Z170A SLI PLUS.
"MSI, leading in motherboard design, completes the PRO Series motherboard line-up with the launch of the all black Z170A SLI PLUS motherboard. Inheriting DNA from the critically acclaimed X99A SLI PLUS motherboard, the Z170A SLI PLUS is powerful, packed with features and styled with class."
While not lacking in stealthy looks from the black PCB to the matching RAM slots and heatsinks, the specifications of this new SLI PLUS board place it firmly into the premium category.
Features include Intel Gigabit LAN, MSI’s DDR4 Boost technology (which isolates memory traces on the board), Turbo M.2 (and U.2) with speeds up to 32 Gb/s with NVMe SSDs, and the Steel Armor PCI Express slots. And while SLI is right there in the title, there is also support for AMD Crossfire with those super-strong PCIe slots.
The board is fabricated with MSI’s Military Class 4 components including super ferrite chokes and all solid capacitors, and also offer a “EZ Debug” LED and overvoltage protection. In addition to support for the fastest internal storage standards (M.2, U.2, and SATA Express), the Z170A SLI PLUS offers full USB 3.1 Gen2 support for transfers up to 10 Gb/s for compatible devices.
- Supports 6th Gen Intel Core / Pentium / Celeron processors for LGA 1151 socket
- Supports DDR4-3600 Memory (OC)
- DDR4 Boost
- USB 3.1 Gen2
- Turbo M.2 32Gb/s + Turbo U.2 ready + USB 3.1 Gen2 Type-C + SATA 6Gb/s
- Steel Armor PCI-E slots; Supports NVIDIA SLI and AMD Crossfire
- OC Genie 4
- Click BIOS 5
- Audio Boost
- Military Class 4
- EZ Debug LED
- Overvoltage Protection
- 4K UHD Support
- Windows 10 Ready
Pricing and availability were not specified with this morning’s announcement.
Subject: Motherboards | October 16, 2015 - 06:06 PM | Jeremy Hellstrom
Tagged: Z170A-XPower Gaming Titanium Edition, skylake-s, msi, lga1151, Intel Z170
As you saw from the pictures in Morry's article, the MSI Z170A-XPower Gaming Titanium Edition is a gorgeous looking motherboard and a shoo-in to power modders systems for this generation as it will lend great character to any inventive build you might construct. Looks are not everything in a motherboard however, enthusiasts also want to know how well it performs. [H]ard|OCP have also recently reviewed this motherboard which earned a Gold Award from their team as well but some of their experiences differed. For instance they saw a stable overclock of 4.7GHz @ 1.45v with the memory at DDR4-2666, albeit with some small problems which they discuss, a bit better than the 4.5GHz Morry achieved. They also had some issues with the sensors and Command Center software which you should read about in addition to Morry's discoveries.
MSI, keep doing what you are doing as some of us are not cultural illiterates!
"MSI has a goal to be the number one motherboard maker in PC Gaming. To that end MSI has been rebranding and the Z170A XPOWER GAMING TITANIUM EDITION motherboard is an example of this shift in focus. This new XPOWER series retains much of its heritage but shifts gears towards being an upper echelon gaming oriented solution."
Here are some more Motherboard articles from around the web:
- MSI Z170A XPOWER GAMING TITANIUM @ eTeknix
- Gigabyte Z170x-Gaming 7 Motherboard @ Hardware Secrets
- GIGABYTE Z170X Gaming G1 @ [H]ard|OCP
- Gigabyte GA-Z170X-GAMING G1 (Intel LGA-1151) @ techPowerUp
- Gigabyte Z170X-Gaming 7 @ Kitguru
- MSI Z170A GAMING PRO @ techPowerUp
- ASRock Fatal1ty Z170 Gaming K6+ Motherboard @ Hardware Secrets
- MSI Z170A Gaming M7 Motherboard Review @ Neoseeker
Introduction and Technical Specifications
Courtesy of MSI
Unique is a word I don't throw around much with motherboard reviews, but the latest revision of MSI' XPower series is nothing if not unique. The Z170A-XPower Gaming Titanium Edition features a stunning silver and black aesthetic for a look unlike any of its competition in the LGA1151 realm, featuring a silver colored PCB and black and red accents in some key areas of the board for some additional eye-catching value. The board features branding on its VRM and chipset heat sinks as well. By integrating the Intel Z170 chipset, the motherboard supports the latest Intel LGA1151 Skylake processor line as well as Dual Channel DDR4 memory. With an MSRP of $299, the Z170A-XPower Gaming Titanium Edition sits at a competitive price point for the features it offers.
Courtesy of MSI
Courtesy of MSI
Courtesy of MSI
To give the board some teeth, MSI paired up the Z170A-XPower Gaming Titanium (Ti) Edition motherboard with its Military Class 5 component architecture. This latest iteration includes a 16-phase digital power delivery system with DrMOS 3-in-1 chip MOSFETS, Titanium chokes, and a mix of Hi-c and DARK capacitors to ensure stable operation under the most extreme circumstances as well as the greatest degree of power efficiency possible. MSI also integrated a high quality audio subsystem, centered around their Nahimic sound technology with Chemi-Con sourced audio capacitors and headphone amplifiers on an isolated PCB. MSI chose to integrate the following features into the Z170A-XPower Gaming Titanium Edition board: four SATA 3 ports; two SATA-Express ports; two M.2 PCIe x4 capable ports; an Intel I219-V GigE controller; four PCI-Express x16 slots; three PCI-Express x1 slots; a 2-digit diagnostic LED display; on-board power, reset, CMOS clear, BIOS Flashback, and Game Boost buttons; Multi-BIOS, Hotkey, and PCI CeaseFire switches; OC Dashboard device support; BIOS Flashback+ BIOS updater; integrated V-Check voltage measurement points;dual HDMI video ports; a DisplayPort video port; and USB 2.0, 3.0, and 3.1 Type-A and Type-C port support.
Subject: General Tech | October 15, 2015 - 04:21 PM | Ken Addison
Tagged: xps15, xps13, video, uhs-2, uhs-1, thinkpad stack, sd cards, ROG, podcast, msi, Maximus VIII, Lenovo, gx700, gt72s, G752, dell, asus
PC Perspective Podcast #371 - 10/15/2015
Join us this week as we discuss the MSI GT72S Dominator Pro G, ROG Product Announcements, Ultrawide G-Sync and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Josh Walrath, Jeremy Hellstrom, and Allyn Malventano
Program length: 1:39:38
Week in Review:
0:42:55 This week’s podcast is brought to you by Casper. Use code PCPER at checkout for $50 towards your order!
News item of interest:
Hardware/Software Picks of the Week:
Allyn: Office 2016 is out