Subject: Storage
Manufacturer: Micron

Introduction, Specifications and Packaging

Introduction:

Micron paper launched their 5100 Series Enterprise SATA SSD lineup early last month. The new line promised many sought after features for such a part, namely high performance, high-performance consistency, high capacities, and relatively low cost/GB (thanks to IMFT 3D NAND which is now well into volume production since launching nearly two years ago). The highs and lows I just rattled off are not only good for enterprise, they are good for general consumers as well. Enterprises deal in large SSD orders, which translates to increased production and ultimately a reduction in the production cost of the raw NAND that also goes into client SSDs and other storage devices.

170130-192150.jpg

The 5100 Series comes in three tiers and multiple capacities per tier (with even more launching over the next few months). Micron sampled us a 2TB 'ECO' model and a 1TB 'MAX'. The former is optimized more for read intensive workloads, while the latter is designed to take a continuous random write beating.

I'll be trying out some new QoS tests in this review, with plans to expand out with comparisons in future pieces. This review will stand as a detailed performance verification of these two parts - something we are uniquely equipped to accomplish.

Read on for our full review of the Micron 5100 MAX 960GB and 5100 ECO 1920GB Enterprise SATA SSDs!

Subject: Storage
Manufacturer: Micron
Tagged: U.2, ssd, pro, pcie, NVMe, micron, MAX, HHHL, 9100

Introduction, Specifications and Packaging

Introduction:

It's been too long since we took a look at enterprise SSDs here at PC Perspective, so it's high time we get back to it! The delay has stemmed from some low-level re-engineering of our test suite to unlock some really cool QoS and Latency Percentile possibilities involving PACED workloads. We've also done a lot of work to distill hundreds of hours of test results into fewer yet more meaningful charts. More on that as we get into the article. For now, let's focus on today's test subject:

DSC01442.jpg

Behold the Micron 9100 MAX Series. Inside that unassuming 2.5" U.2 enclosure sits 4TB of flash and over 4GB of DRAM. It's capable of 3 GB/s reads, 2 GB/s writes, and 750,000 IOPS. All from inside that little silver box! There's not a lot more to say here because nobody is going to read much past that 3/4 MILLION IOPS figure I just slipped, so I'll just get into the rest of the article now :).

Specifications:

specs.png

The 9100's come in two flavors and form factors. The MAX series (1.2TB and 2.4TB in the above list) come with very high levels of performance and endurance, while the PRO series comes with lower overprovisioning, enabling higher capacity points for a given flash loadout (800GB, 1.6TB, 3.2TB). Those five different capacity / performance points are available in both PCIe (HHHL) and U.2 (2.5") form factors, making for 10 total available SKUs. All products are PCIe 3.0 x4, using NVMe as their protocol. They should all be bootable on systems capable of UEFI/NVMe BIOS enumeration.

Idle power consumption is a respectable 7W, while active consumption is selectable in 20W, 25W, and 'unlimited' increments. While >25W operation technically exceeds the PCIe specification for non-GPU devices, we know that the physical slot is capable of 75W for GPUs, so why can't SSDs have some more fun too! That said, even in unlimited mode, the 9100's should still stick relatively close to 25W and in our testing did not exceed 29W at any workload. Detailed power testing is coming to future enterprise articles, but for now, the extent will be what was measured and noted in this paragraph.

Packaging:

Our 9100 MAX samples came only in anti-static bags, so no fancy packaging to show here. Enterprise parts typically come in white/brown boxes with little flair.

Read on for our full review of the Micron 9100 MAX 2.4TB U.2 Enterprise SSD!