The Phanteks Enthoo Pro M gets a temper

Subject: General Tech | October 19, 2016 - 03:14 PM |
Tagged: phanteks, matx case, Enthoo Pro M, Enthoo, enclosure, atx case

Sebastian reviewed the Enthoo Pro M back in August, a well received case with a layout similar to an EVOLV ATX or Fractal Design Define S.  Phanteks have recently updated the exterior of the case, replacing the plastic side window and panel with a side panel made completely of tempered glass.  You can see how the upgraded model looks over at Kitguru.  There is also a variant which looks the same as this model, but with an acrylic side panel for those concerned about the price or mistrusting of a glass side panel.

Phanteks-Pro-M-Glass-Chassis-Review-on-KitGuru-Skeleton-Frame-Front-Left-34.jpg

"The short version of this review is that Phanteks has given its Enthoo Pro M case a minor update and has changed the main side panel for a sheet of tempered glass. The slightly longer version is that Phanteks has revised its superb entry level Pro M case by replacing one of the few weak features, a flexible steel side panel with a so-so plastic window, with a gorgeous panel of tempered glass."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: Kitguru

Lian Li Announces Ebonsteel Line of Affordable Steel Cases

Subject: Cases and Cooling | May 19, 2016 - 10:43 AM |
Tagged: steel, matx case, Lian Li, enclosure, case, atx case

Lian Li is now producing steel enclosures (gasp), which translates into some more affordable options on the market from this venerable brand that typically produces products from aluminum and glass.

lian_li_steel.png

(left to right) Lian Li PC-K5, PC-K6, and PC-K6S

“Lian Li has been known for its signature brushed aluminum aesthetic for decades. For many years, a number of customers have requested more affordable alternatives. The Ebonsteel series is intended to provide this option for those who seek the best value in PC cases. While these chassis are built with steel rather than aluminum, they are still very much Lian Li cases – tool-less building features, grommeted panel cutouts for cable management, vibration-dampened PSU mounts and drive cages, removable mesh filters on fan mounts – they include many of the bells and whistles of a typical Lian Li case!”

The three new enclosures Lian Li is featuring in their news release include the mid-tower PC-K5 and PC-K6, and a silent version of the latter named PC-K6S. Of these the PC-K5 is a budget-minded option, with an MSRP of $56 for the standard version, and $60 if you'd like a side panel window. The PC-K6 is a more premium offering, with an MSRP of $93, with the silent version at $109.

As to availability, I'll quote the press release here: "The Ebonsteel cases will be available in mid June for K5, and late June for K6, K6S."

Source: Lian Li

Phanteks Enthoo Mini XL Dual System Enclosure: 2 Motherboards with 1 PSU

Subject: Cases and Cooling | December 2, 2015 - 09:39 AM |
Tagged: phanteks, mini-itx, matx case, Enthoo Mini XL, dual system, dual motherboard

Phanteks has announced a new version of their Enthoo Mini XL enclosure, adding their PSU splitter to the package to allow both systems to use a single PSU, and now including the optional mini-ITX upgrade kit.

Enthoo-Mini-XL-Dual-System-1.jpg

"With the overwhelming response from the community, users have requested for a solution to the Enthoo Mini XL's dual system configuration setup. Today, Phanteks announces the release of the Enthoo Mini XL Dual System. The Mini XL Dual System will have Phanteks Power Splitter and the Mini ITX upgrade kit pre-installed. With Enthoo Mini XL Dual System, users can run two fully functional system independently of one another. The Mini XL Dual System provides users to have the option of having a high powered gaming system and workstation or Gaming system and streaming system all in one case."

The need for a dual-motherboard system is confined to a small percentage of builders, but the appeal of this enclosure package might create some additional interest. It's a cool idea, and while the Mini XL has been around since January the PSU splitter is a fairly new product, and interesting on its own.

PH-PWSPR-1.jpg

"Using the Power Splitter, a dual system configuration can operate independently of one another. Powering ON/OFF on one system will not affect the other and vice versa. As long as one system is running the power supply will be fully operational until both systems are off."

The Enthoo Mini XL Dual System enclosure will be available this month, and the press release listed 209.90 Euro (about $222 US) indicating this might not be available in the US just yet.

Source: TechPowerUp

Crono Labs C1 Computer Case Hits Indiegogo: DIY AIO

Subject: Cases and Cooling | August 31, 2015 - 05:25 PM |
Tagged: matx case, Indiegogo, enclosures, crowdfunding, Crono Labs, cases, C1 Computer Case

Crono Labs of Galway, Ireland is a startup that hopes to “declutter your desk” with their C1 Computer Case, a unique enclosure that allows you to mount a VESA compliant monitor to the case itself, creating your own all-in-one system.

C1_00.jpg

The C1 is a slim micro-ATX enclosure with support for standard ATX power supplies and graphics cards up to 10.5”, and it sits on a stand that looks like that of a standard monitor.

Here’s a list of compatible components from Crono Labs:

  • mATX or ITX motherboard
  • ATX PSU
  • Two 3.5″ drives
  • Two 2.5″ drives
  • GPU’s up to 10.5″
  • Low profile CPU coolers
  • Four 120mm fans
  • Water Cooling: 1X 120mm cooler and 1X 240mm cooler can be used, at the same time. Water coolers will not fit if an mATX motherboard is used

C1_01.PNG

The Indiegogo page is now up, and with a modest goal of $2000 they hope to create their initial prototypes before moving to the next phase of funding for production. It’s an interesting concept, and it looks like they have thought this design through with some nice touches:

  • A short VGA, HDMI and branching power cable come with the case for reduced cable clutter. Less mess, less stress.
  • Rotated motherboard points the IO ports downwards for tidier cables. The motherboard is also raised up into the case to allow cables to go beneath it.
  • Carry handle makes transporting the case easy, from desk to desk or room to room.
  • The case has a very small footprint, leaving you with a much more pleasing work area, for all that important stuff you do.

The idea of creating a portable all-in-one type system is appealing for the space-constrained or for LAN gaming, and the ability to use full-sized components would allow for a more powerful, and lower cost, build. What do you think of this design?

Source: Indiegogo
Manufacturer: Phanteks

Introduction and First Impressions

The Enthoo Pro M is the new mid-tower version of the Enthoo Pro, previously a full-tower ATX enclosure from the PC cooler and enclosure maker. This new enclosure adds another option to the $79 case market, which already has a number of solid options. Let's see how it stacks up!

pro_m_cover.jpg

I was very impressed by the Phanteks Enthoo EVOLV ATX enclosure, which received our Editor’s Choice award when reviewed earlier this year. The enclosure was very solidly made and had a number of excellent features, and even with a primarily aluminum construction and premium design it can be found for $119, rather unheard-of for this combination in the enclosure market. So what changes from that design might be expect to see with the $79 Enthoo Pro M?

The Pro M is a very businesslike design, constructed of steel and plastic, and with a very understated appearance. Not exactly “boring”, as it does have some personality beyond the typical rectangular box, with a brushed finish to the front panel which also features a vented front fan opening, and a side panel window to show off your build. But I think the real story here is the intelligent internal design, which is nearly identical to that of the EVOLV ATX.

Continue reading our review of the Phanteks Enthoo Pro M enclosure!!

Introduction and First Impressions

Supermicro recently entered the consumer space with a new line of enthusiast motherboards and today we’re looking at a gaming enclosure from the well-known enterprise manufacturer.

supermicro_main.jpg

While many component manufacturers have diversified their product offerings to include everything from cooling fans to thumb drives, Supermicro is not a name that anyone familiar with the company would have likely suspected of this trend. With recent Z97 and X99 motherboard offerings Supermicro has made an effort to enter the enthusiast market with boards that don’t exactly look like gaming products, but this is to be expected from a company that specializes in the enterprise market.

It was something of a surprise to hear that Supermicro had created a new enclosure for the consumer segment, and even more so to hear that it was to be a gaming enclosure. And while the term “gaming” gets thrown around quite a bit the new enclosure does have the look we tend to associate with the moniker, with flashy red accents and a brushed aluminum front panel to go along with all-black steel enclosure.

supermicro_cover.jpg

Continue reading our review of the Supermicro SuperChassis S5 enclosure!!

Cooler Master's Silencio 652S is a Roomy Mid-Tower Case with Silent Aspirations

Subject: Cases and Cooling | December 28, 2014 - 11:15 PM |
Tagged: silent case, silencio, mid-tower, matx case, enclosure, cooler master, case, atx case

Sometimes you don't want your system to sound like a clogged vacuum cleaner, and that's where a silent case can help. To be fair, all cases are silent until there are running components inside (it's been scientifically proven), but with enough insulation and some quiet fans a case can provide virtual silence with a system installed and running.

37_Product_left_side vent.jpg

The Silencio cases from Cooler Master have been around for a while, and the current iteration comes in both mid and mini tower versions. The mid-tower Silencio 652S was just reviewed over at The Tech Report, and it looks like a solid option for a quiet case without being too expensive at around $119.

The features and price tag of this case compare favorably with Fractal Design's Define R5 enclosure - recently reviewed here at PC Perspective. The 652S boasts massive storage capacity for up to 9 hard drives or 10 SSDs, along with support for long GPUs and liquid cooling, making it a nice option for quiet cooling depending on performance.

29_Product_system_SSD.jpg

Pretty clean looking build you have there, Cooler Master

The case looks good if you like a minimalist design, though the review did find the included fans to be a bit loud. Check out the full review over at The Tech Report for a detailed look at the Silencio 652S.