The cool new Cooler Master G100M Masters Air cooling

Subject: Cases and Cooling | January 17, 2019 - 02:16 PM |
Tagged: cooler master, MasterAir, GM100, aircooling, low profile cooler, aliens, RGB

The MasterAir G100M is quite the cooler, with a look we haven't seen from CM in recent memory and is a mere 143x143x74.5mm in size with the fan attached.  This lets it fit into SFF systems, though as Modders-Inc discovered, the round shape means you should install your RAM before the cooler and avoid modules with larger heatsinks.  It is rated for AMD and Intel CPUs of up to 130W TDP but testing showed that is a maximum and it is not really equipped to handle overclocked enthusiast processors, which only makes sense considering what it is actually for.

Check out the review in its entirety right here.

MasterAir-G100M00008.jpg

"Reminiscent of the Jupiter 2 from the 1960's version of the TV series Lost In Space, the Cooler Master G100M is affectionately called the UFO cooler. The G100M is a low profile cooler designed to fit into smaller cases especially mini-ITX."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: Modders-Inc

If you aren't into the hefty ones, check out the Noctua NH-L9x65

Subject: Cases and Cooling | July 27, 2015 - 02:19 PM |
Tagged: noctua, NH-L9x65, low profile cooler

Morry likes big coolers and Noctua is one of his preferred brands when he wants to test the tensile stregth of a motherboard.  Not all of Noctua's coolers are up to his preferences, such as the slender NH-L9x65, a waif-like 413g with the fan attached and a cute 95x95x79mm in size with a 14mm lift from that fan.  TechPowerUp's testing shows that the fan is quite quiet even when spinning at full speed but even still the temperatures of the i7-4770K it was cooling were the highest on the charts.  If you are cooling a CPU with a lower TDP in a small case, or even a 4770K then check out this review, the NH-L9x65 is a little expensive but certainly usable.

install6.jpg

"Noctua's new NH-L9x65 is a low profile, small form-factor cooler. When I say small, I mean tiny as it is only slightly larger than the Intel stock heatsink, which is surprising and begs me to question its maximum potential. While performance most likely won't be its strong point, there is a chance this pint-sized offering will have a few surprises in store"

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: techPowerUp

Noctua Offers Free Alternative Mounting Kit for Low-Profile NH-L9a Cooler

Subject: Cases and Cooling | April 26, 2013 - 12:30 AM |
Tagged: noctua, nh-l9a, hsf, cooler, mini-itx, low profile cooler

Noctua, an Austrian company known for its high-end air CPU coolers has announced that it will be offering up alternatvie mounting kits to users of its low profile NH-L9a cooler that have incompatible motherboards. Certain mini-ITX motherboards that place components on the back of the motherboard around the processor socket are incompatible with the company’s existing SecureFirm 2 mounting kit because the backplate cannot be installed.

Low Profile Noctua NH-L9a CPU Cooler.jpg

The new alternative mounting system for the NH-L9a CPU cooler uses Noctua’s NM-APS3 spacers that go in place of the standard backplate. The spacers go in between the motherboard and screws, but are small enough to not run into any components installed in the area normally reserved for a CPU backplate. Two such boards that Noctua has found to be incompatible are the mini-ITX AsRock FM2A75M-ITX and AsRock FM2A85X-ITX.

Users with an incompatible motherboard and NH-L9a cooler can obtain the alternative mounting kit for free by contacting Noctua’s customer service line and providing them with a proof of purchase (scan, photo, or electronic invoice) receipt for both the Noctua cooler and an incompatible motherboard. Additionally, Noctua will be including both the standard SecureFirm 2 and alternative mounting kits in the retail NH-L9a cooler box from now on.

It is nice to see Noctua continuing its tradition of good customer care. They many not be as popular as other cooler vendors in the US but it seems they are a company willing to go the extra mile for its enthusiast customers.

Source: Noctua