Subject: Cases and Cooling | March 30, 2016 - 09:40 PM | Tim Verry
Tagged: water cooling, overclocking, liquid cooling, EKWB
The guys over at the Tech Report spotted a rather shiny product coming out soon from EKWB. The company is adding a nickel plated memory heat-spreader kit can be used to replace your existing heatspreaders and hook into a RAM waterblock like EKWB's own Monarch X2 to allow you to liquid cool your memory and add it to your custom cooling loop.
These new modules are similar to the existing black modules, but have a nickel plated finish that is particularly shiny (see the photo below). Each kit includes the parts to replace the heatspreaders on two memory modules. Thermal pads are used to facilitate heat transfer from the memory chips to the CNC'ed aluminum heatsinks.
Users can then screw a memory waterblock (EKWB specifies the Monarch X2 Acetel/Nickel) to the top of the replaced memory heat-spreaders. Heat is then transferred from the heatsinks to the block and finally to the water loop.
The new Monarch modules are available now for $34.99. The Monarch X2 waterblock adapter is a further $38.99 if you want to water cool the DRAM. Note that the existing black anodized heatsinks are a bit cheaper at $29.99.
The heatsinks certainly look nice, and while I can see reasons to liquid cool them for aesthetics or to play around with extreme overclocking water cooling your memory using them will get expensive in short order considering you need to buy both kits for every two memory DIMMs (I hope you don't have X99 with all slots populated heh).
If you really want to cool all the things and add a bit of 'bling' to your system look no further!
Subject: Graphics Cards, Systems | March 10, 2016 - 11:38 AM | Sebastian Peak
Tagged: zotac, zbox, VR, SFF, nvidia, mini-pc, MAGNUS EN980, liquid cooling, GTX980, GTX 980, graphics, gpu, geforce
ZOTAC is teasing a new mini PC "ready for virtual reality" leading up to Cebit 2016, happening later this month. The ZBOX MAGNUS EN980 supplants the EN970 as the most powerful version of ZOTAC's gaming mini systems, and will come equipped with no less than an NVIDIA GeForce GTX 980.
(Image via Guru3D)
Some questions remain ahead of a more formal announcemnent, and foremost among them is the version of the system's GTX 980. Is this the full desktop variant, or the GTX 980m? It seems to be the former, if we can read into the "factory-installed water-cooling solution", especially if that pertains to the GPU. In any case this will easily be the most powerful mini-PC ZOTAC has released, as even the current MAGNUS EN970 doesn't actually ship with a GTX 970 as the name would imply; rather, a GTX 960 handles discrete graphics duties according to the specs.
The MAGNUS EN980's GTX 980 GPU - mobile or not - will make this a formidable gaming system, paired as it is with a 6th-gen Intel Skylake CPU (the specific model was not mentioned in the press release; the current high-end EN970 with dicrete graphics uses the Intel Core i5-5200U). Other details include support for up to four displays via HDMI and DisplayPort, USB 3.0 and 3.1 Type-C inputs, and built-in 802.11ac wireless.
We'll have to wait until Cebit (which runs from March 14 - 18) for more details. Full press release after the break.
Subject: Cases and Cooling | November 5, 2015 - 09:28 AM | Sebastian Peak
Tagged: water cooling, water block, liquid CPU cooler, liquid cooling, Lian Li, CPU Water Block, CB-01
Computer component manufacturers often diversify their offerings to stay competitive, but it's still surprising to see Lian Li enter the CPU cooling market - and with a water block, no less!
The CB-01 is the company's first water block, and it features support for all current sockets from Intel and AMD. Lian Li is emphasizing style and build quality with the new block, which adds support for LED lighting as well.
“The cold plate has a heart of solid copper in a nickel coating and a final layer of tin-cobalt for extra cooling, durability, and corrosion resistance. The top is a translucent acrylic block that visibly guides the cooling waters through the microchannels. The simple yet sturdy mounting fits virtually all modern and past motherboard sockets securely. For a bit of flare, there are holes pre-drilled for 5mm LED lights.”
CB-01 Features (from Lian Li):
- Lian Li style and craftsmanship in a CPU water block
- Copper heat sink with nickel and tin-cobalt plating
- G1/4” thread size
- Cold plate area 60×60mm
- Thinly cut microchannel with area of 32.2×27.3mm
- Supports all Intel sockets: LGA 1366/2011/1155/1156/775
- Supports AMD sockets: AM2+/AM3/AM3+/FM1/FM2
- 5mm LED mounting
Availability is listed as “coming soon”, and no MSRP was announced.
Subject: General Tech, Cases and Cooling | August 27, 2015 - 12:17 AM | Tim Verry
Tagged: water cooling, liquid cooling, Intel, ek, AIO
EK (EK Water Blocks) is pouncing on the AIO liquid cooling market with its new EK-Predator series. The new cooler series combines the company's enthusiast parts into pre-filled and pre-assembled loops ready to cool Intel CPUs (AMD socket support is slated for next year). Specifically, EK is offering up the EK-Predator 240 and EK-Predator 360 which are coolers with a 240mm radiator and a 360mm radiator respectively.
The new coolers use copper radiators and EK Supremacy MX CPU blocks the latter of which has a polished copper base so there is no risk associated with using mixed metals in the loop. A 6W DDC pump drives the loop with the pump and a small reservoir attached to one side of the radiator (allegedly using a vibration dampening mounting system). EK ZMT (Zero Maintenance Tubing) 10/16mm tubing connects the CPU block to the pump/radiator/reservoir combo which uses standard G1/4 threaded ports.
EK pairs the radiator with two or three (depending on the model) EK-Vardar high static pressure fans. The fans and pump are PWM controlled and connect to a hub which is then connected to the PC motherboard's CPU fan header over a single cable. Then, a single SATA power cable from the power supply provides the necessary power to drive the pump and fans.
The EK-Predator 360 further adds quick disconnect (QDC) fittings to allow users to expand the loop to include, for example, GPU blocks. EK Water Blocks is reportedly working on compatible GPU blocks which will be available later this year that users will be able to easily tie into the EK-Predator 360 cooling loop.
Available for pre-order now, the EK-Predator 240 will be available September 23rd with an MSRP of $199 while the larger EK-Predator 360 is slated for an October 19th release at $239 MSRP.
If the expected performance is there, these units look to be a decent value that will allow enthusiasts to (pun intended) get their feet wet with liquid cooling with the opportunity to expand the loop as their knowledge and interest in water cooling grows. The EK-Predators are not a unique or new idea (other companies have offered water cooling kits for awhile) but coming pre-assembled and pre-filled makes it dead simple to get started and the parts should be of reputable quality. The one drawback I can see from the outset is that users will need to carefully measure their cases as the pump and reservoir being attached to the radiator means users will need more room than usual to fit the radiator. EK states in the PR that the 240mm rad should fit most cases, and is working with vendors on compatible cases for the 360mm radiator version, for what that's worth. Considering I spent a bit under $300 for my custom water cooling loop used, this new kit doesn't seem like a bad value so long as the parts are up to normal EK quality (barring that whole GPU block flaking thing which I luckily have not run into...).
What do you think about EK's foray into AIO water cooling? Are the new coolers predators or prey? (okay, I'll leave the puns to Scott!).
Subject: General Tech, Systems | June 1, 2015 - 07:30 AM | Tim Verry
Tagged: steam os, living room gaming, liquid cooling, gaming, DIY, corsair, computex 2015, computex, barebones, 4k
Today at Computex, Corsair unveiled a new barebones gaming PC aimed at the living room. The compact Bulldog PC is an upgradeable barebones DIY kit that offers gamers an interesting base from which to build a living room PC capable of 4K gaming. The chassis resembles an overbuilt console in that it is a short but wide design with many angular edges and aesthetic touches including stylized black case feet and red accents surrounding the vents. A hidden panel in the lower right corner reveals two USB 3.0 ports and two audio jacks. It looks ready to fight in the next season of Robot Wars should you add a flamethrower or hydraulic flipper (heh).
The Bulldog kit consists of the chassis, motherboard, small form factor power supply, and a customized Hydro H55F series closed loop liquid CPU cooler. From there, users need to bring their own processor, RAM, and storage devices. There is no operating system included with the kit, but it, being a full PC, supports Windows, Linux, and SteamOS et al.
As far as graphics cards, Corsair is offering several liquid cooled NVIDIA graphics cards (initially only from MSI with other AIB partner cards to follow) that are ready to be installed in the Bulldog PC. Currently, users can choose from the GTX TITAN X, GTX 980, and GTX 970.
Alternatively, Corsair is offering a $99 (MSRP) upgrade kit for existing graphics cards with its Hydro H55 cooler and HG110 bracket.
The Bulldog case supports Mini ITX form factor motherboards and it appears that Corsair is including the Asus Z97I-Plus which is a socket 1150 board supporting Haswell-based Core processors, DDR3 memory, M.2 (though you have to take the board out of the case to install the drive since the slot is on the underside of the board), a single PCI-E 3.0 x16 slot, four SATA 6.0 Gbps ports, and the usual fare of I/O options including USB 3.0, 802.11ac Wi-Fi, and optical and analog audio outputs (among others).
A mini ITX motherboard paired with the small from factor Corsair H55F CPU cooler (left) and the internal layout of the Bulldog case with all components installed (right).
User purchased processors are cooled by the included liquid cooler which is a customized Hydro series cooler that mounts over the processor and exhausts air blower style out of the back of the case. The system is powered by the pre-installed 600W Corsair FS600 power supply. The PSU is mounted in the front of the system and the graphics card radiator and fan are mounted horizontally beside it. Along the left side of the case are mounts for a single 2.5" drive and a single 3.5" drive.
GPU manufacturers will be selling card with liquid coolers pre-installed. Users can also upgrade existing air cooled graphics cards with an optional upgrade kit.
The liquid cooling aspect of the Bulldog is neat and, according to Corsair, is what is enabling them to cram so much hardware together into a relatively small case while enabling thermal headroom for overclocking and quieter operation versus air coolers.
I am curious how well the CPU cooler performs especially as far as noise levels go with the compacted and shrouded design. Also, while there is certainly plenty of ventilation along the sides of the case to draw in cool air, I'm interested in how well the GPU HSF will be able to exhaust the heat since there are no top grilles.
Corsair is marketing the Bulldog as the next step up from your typical Steam Machine and game console and the first 4K capable gaming PC designed for the living room. Further, it would be a nice stepping stone for console gamers to jump into PC gaming.
From the press release:
“Bulldog is designed to take the 4K gaming experience delivered by desktop gaming PCs, and bring it to the big 4K screens in the home,” said Andy Paul, CEO of Corsair Components. “We knew we needed to deliver a solution that was elegant, powerful, and compact. By leveraging our leading expertise in PC case design and liquid cooling, we met that goal with Bulldog. We can’t wait to unleash it on gamers this fall.”
The Bulldog DIY PC kit is slated for an early Q4 2015 launch with a MSRP of $399. After adding in a processor, memory, storage, and graphics, Corsair estimates a completed build to start around $940 with liquid cooled graphics ($600 without a dedicated GPU) and tops out at $2,250.
Keep in mind that the lowest tier liquid cooled GPU at launch will be the MSI GTX 970 (~$340). Users could get these prices down a bit with some smart shopping and component selection along with the optional $99 upgrade kit for other GPU options. It is also worth considering that the Bulldog is being positioned as a 4K gaming machine. If you were willing to start off with a 1080p setup, you could get buy with a cheaper graphics card and upgrade later along with your TV when 4K televisions are cheaper and more widespread.
At its core, $400 for the Bulldog kit (case, quality power supply, high end motherboard, and closed loop CPU cooler) is a decent value that just might entice some console gamers to explore the world of PC gaming (and to never leave following their first Steam sale heh)! It is a big commitment for sure at that price, but it looks like Corsair is using quality components and while there is surely the usual the small form factor part price premium (especially cases), it is far from obnoxious.
What do you think about the bulldog? Is it more bark than bite or is it a console killer?
Subject: General Tech, Systems | May 3, 2015 - 04:27 PM | Tim Verry
Tagged: z97, xeon e5-2699v3, X99, tiki-z, tiki, SFF, liquid cooling, Haswell-E, falcon northwest, core i7-5960x
Falcon Northwest recently upped the hardware ante on its small form factor Tiki PC. Previously limited to Z97-based hardware, the company is now offering Tiki PCs with X99 motherboards. Even better, the Tiki can be configured with Intel’s Haswell-E Core i7-5000 or Haswell-EP Xeon chips such as the Core i7-5960X or Xeon E5-2699V3.
The updated Tiki maintains the same steel and aluminum case measuring 13” x 4” x 13” (HxWxD) with customizable paint work and a removable solid aluminum or granite base as its predecessors (e.g. Tiki-Z). External I/O options include the latest USB 3.1, eSATA, and Dual Intel Gigabit LAN ports. Internally, the Tiki has space for an Intel Z97 or X99 motherboard with a liquid cooled processor, up to 32GB of DDR4 (or 16GB DDR3 with Z97) memory, a dedicated graphics card up to an NVIDIA GTX TITAN X or Quadro and ample storage space in the form of four 2.5” drives or one 3.5” and two 2.5” drives.
All this hardware amounts to an impressive amount performance in general – much less a small form factor system. At the upper echelon, the Xeon E5-2699V3 offers 18 cores (36 threads with HT) clocked at up to 3.6 GHz paired with 45MB of L3 cache. Paired with a Quadro card like the M6000, that is one powerful workstation!
The updated Tiki is aimed at gamers and workstation builds doing intensive workloads like CAD, 3D animation, and video production.
The downside to this stylish powerhouse is, of course, pricing – the Tiki is far from cheap and the boutique premium is quite evident here. Available now, the updated Tiki starts at $1,860 for a base level Z97 system with quad core CPU or $2,492 for an eight core X99-based system. Fully loaded, the Tiki tops $10,000.
It is definitely an extremely niche product, but the engineering and styling is impressive all the same!
Subject: Cases and Cooling | January 6, 2015 - 12:00 PM | Sebastian Peak
Tagged: liquid cooling, liquid cooler, cpu cooler, corsair, ces 2015, CES, AIO, 280mm, 140mm
Corsair has announced their newest Hydro Series all-in-one (AIO) liquid CPU cooler, the H110i GT. This new model has a 140x322 mm radiator and dual 140mm SP140L fans.
Corsair points out the "striking new look with logo inserts on the block and radiator" which add style, but more importantly part of the design changes with the H110i include a new cooling block to make potential performance gains over existing designs an interesting possibility. Certainly the larger radiator surface area and 140mm fans suggest lower noise.
Corsair Link support is also provided to allow "monitoring and customization of built-in logo lighting, fan speed, pump speed".
- 140mm x 322mm x 27mm aluminum radiator
- Two SP140L 140mm high static pressure fans
- Corsair Link support for customization and monitoring
- Sleeved wide diameter, low evaporation rubber tubing
- Support for Intel LGA 115x, 1366, 2011 and AMD AM2, AM3, FM1, FM2
- 5-year limited warranty
- MSRP: $129.99
The H100i GT Liquid CPU Cooler will carry a $129.99 MSRP and availablity is set for a February release.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Cases and Cooling | January 6, 2015 - 12:00 PM | Sebastian Peak
Tagged: nvidia, liquid cooling, Hydro Series, gpu cooler, corsair, ces 2015, CES, AIO
Corsair has announced a new liquid cooling bracket for graphics cards, the Hydro Series HG10 N780 Edition.
The bracket allows a Corsair Hydro Series liquid CPU cooler (not included, of course) to be attached to select NVIDIA GeForce cards. What cards are compatible? Reference design NVIDIA GeForce GTX 770, GTX 780, GTX 780 Ti, Titan and Titan Black. (Reference design refers to the board itself, and you will often find aftermarket cooling on reference-based cards in the retail channel. As always, it's best to research your card beforehand!)
The HG10 N780 requires just eight screws to install, and Corsair states that the bracket "when combined with a Corsair Hydro Series CPU liquid cooler" of course, "can reduce the GPU’s temperature by up to 45° C, and works with the GPU’s automatic temperature control (to) lower the speed of its onboard fan for quieter operation".
VRAM and VRMs are also cooled with the bracket, "helping extend the life of the GPU and providing more overclocking headroom".
- Allows any Corsair Hydro Series CPU cooler to be attached to and cool NVIDIA GeForce GPUs
- Compatible with reference NVIDIA® GeForce® GTXTM 770, GTX 780, GTX 780 Ti, Titan and Titan Black graphics cards
- Reduces GPU temperatures by up to 45° C
- Allows most GPUs to automatically reduce stock fan speed for quieter operation
- Cools the main GPU processor, VRAM, and VRMs
- 2-year limited warranty
- MSRP: $39.99
The H10 N780 will be available in February with an MSRP of $39.99.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech | November 19, 2014 - 12:27 PM | Jeremy Hellstrom
Tagged: Novec, mineral oil, liquid cooling, Iceotope, 3M, PetaGen
It has been over a year since we last heard from Iceotope and their total immersion cooling system for servers but they have finally hit the market with the PetaGen liquid cooling system. Using 3M's inert liquid which is branded Novec and after working with Intel to ensure the system can handle high end processors they are ready to launch a series of cabinets and products to sell to data centers, or at least ones with heavily reinforced flooring. The weight could be a drawback for their sales people, not only are false floors going to be unfeasible there is a good chance the density of a totally immersed server will require serious support to resist the lure of gravity. The investment could be worth it, their original claims seem to have been accurate and their system can reduce the cost of cooling your servers from about 50% of your operating cost down to 2%. More attractive for some is that the waste heat is dumped into water which can heat to around 45C, enough to be recycled for building heating and other purposes to further lower a businesses operating costs. Drop by The Inquirer for a bit of the history and more information on the company that is making mineral oil obsolete.
"BRITISH SERVER COOLING FIRM Iceotope has developed a cooling system in partnership with Intel designed for high performance computing and supercomputing."
Here is some more Tech News from around the web:
- Richard Huddy discusses AMD Mantle V Nvidia CUDA @ Kitguru
- Cries of spies as audit group finds possible 'backdoor' in Bittorrent Sync @ The Register
- Microsoft Azure Outage Across the Globe @ Slashdot
- Microsoft issues emergency patch for bug affecting all versions of Windows @ The Inquirer
- Microsoft ending support for Windows Server 2003 expected to drive replacement of servers, say Taiwan makers @ DigiTimes
- Extreme Repair of an All-in-One PC @ Hack a Day
Subject: Cases and Cooling | November 7, 2014 - 12:45 AM | Tim Verry
Tagged: water cooling, thermaltake, mid-tower, liquid cooling, core v41, atx
Thermaltake added a new mid-tower case to its Core series this week that is well-suited to water cooling systems. The new Core V41 is the smallest chassis in the family which includes the full tower Core V71 and the Core V51 mid-tower. Thermaltake's new case is a slightly more compact version of the Core V51 that maintains the curved metal mesh design. The Core V51 supports full ATX motherboards, multiple graphics cards, tool-free storage, and a large acrylic window.
The Core V41 has a full mesh front panel with two externally-accessible 5.25" drive bays, two audio ports, and two USB 3.0 ports. The case has eight PCI expansion slots on the rear. It supports up to ATX motherboards, 170mm processor heatsinks, 275mm long graphics cards, and 180mm power supplies. Thermaltake includes a massive CPU cutout that should accommodate installation of just about any CPU backplate without needing to remove the motherboard. There are four large cable routing cutouts (sans grommets) around the motherboard tray as well as three water cooling grommets to allow external radiators and up to 1/2" diameter tubing.
Storage consists of two 5.25" drive bays, six 3.5" bays, and two stealth 2.5"/3.5" bays behind the motherboard tray. In a neat twist, all three tool-free bays are removable to allow for longer graphics cards and top-mounted liquid cooling radiators.
The case supports a wide range of cooling configurations with vents along the top, front, rear, and bottom of the case (the Core V41 has rather tall feet which should make a bottom-mounted fan actually useful). Thermaltake includes magnetic dust filters on the top and front of the case, and it has been designed with front-to-back intake/exhaust airflow in mind. Thermaltake bundles the case with a single 120mm front intake and one 120mm rear exhaust.
For air cooling, users can add two 120mm fans to the bottom and two 200mm fans to the top of the case. Alternatively, water cooling radiators can be set up as follows:
- 1 x 360mm radiator in the front
- 1 x 360mm radiator up top
- 1 x 120mm radiator (common for sealed loop CPU coolers) in place of the rear exhaust fan.
There are some minor compromises, but overall the Core V41 looks to be a decent case with some useful features for its price range. Thermaltake has not yet revealed pricing or availability, but it should hit below the $100 mark at retail. For reference, the Core V51 retails for just under $110 USD and you are getting slightly less case with the V41.
- Thermaltake's Core V51 offers a lot of choice to the system builder
- Thermaltake Launches Full Tower Core V71 Case