Subject: Cases and Cooling | February 23, 2017 - 01:44 AM | Tim Verry
Tagged: mid tower, led, FSP Group, fsp, atx
Today FSP Group (a company mainly known for power supplies with headquarters in Taiwan) is launching a new mid tower ATX computer case called the CMT210. The new PC mid-tower features a transparent side window, black angular exterior with LED accents, and a focus on cooling performance. The 460mm x 220mm x 432mm steel case is aimed at gamers and enthusiasts that want to show off their PC internals.
The front of the CMT210 mid tower is dominated by a massive filtered vent that houses up to three 120mm fans or a 360mm water cooling radiator. The large vent with angled “water droplet” mesh is surrounded by a shroud that features colored accents in either black, red, silver, or deep blue depending on the model you choose. Up top the case offers two audio jacks, two USB 3.0 ports, and a single USB 2.0 port. (The USB 3.0 ports can be plugged into a USB 2.0 motherboard header with the included adapter if you are still holding off on upgrading to Kaby Lake or Ryzen.)
The top of the case is flat with no vents, and there are also no vents on the bottom. Instead there is a single 120mm exhaust fan vent at the rear of the case. FSP includes two of its own 120mm LED fans with the case that come pre-installed in the front and back.
The CMT210 is compatible with ATX motherboards, seven PCI slots, three 3.5” and three 2.5” tool-less drive bays, CPU coolers up to 160mm high and graphics cards up to 360mm long, and ATX power supplies (20.5cm). The power supply is bottom mounted in this case and the storage drives are snapped into trays in the bottom-front caddy and motherboard tray. There are cutouts for cable routing but no rubber grommets (not the end of the world, but they are a nice touch).
FSP claims that its new case is designed with "cooling, expansion, and compatibility" in mind. It is available now in the US though pricing is still unknown as retailers have not put up product pages yet. For more information on the CMT210 you can find details on this product page and this video.
I am curious how well the cooling setup will work with only a single exhaust fan especially if you had a multi GPU setup with aftermarket coolers. Hopefully Sebastian can put it through its paces at some point to examine the build quality and cooling prowess claims. If the price is right, it could be a good budget case as it does not look too bad and does not go crazy with LEDs and bling which is nice to see (I may just be getting old though haha).
What are your thoughts on PSU maker FSP Group getting into the case market?
Subject: Cases and Cooling | December 2, 2016 - 03:58 PM | Jeremy Hellstrom
Tagged: magnetic levitation, corsair, air cooling, ML 120, ML140 Pro, ML120 Pro, led
Instead of using sleeve bearings, ball bearings or fluid dynamic bearings, the Corsair ML series relies on magnetic levitation to deal with the friction created by a spinning fan. The fans are available in 120mm and 140mm sizes, with blue, red or white LEDS, or none if you prefer. The fans use a 4-pin PWM connection to allow you to control their speed and should be compatible with any case, heatsink or radiator you might want to use them with. Techgage tried them out in a Cooler Master CM 690 III. They are somewhat pricey, the Pro version which ships with rubber mounts more so, with the non-Pro models shipping in pairs. Read all about them in their review.
"I’m a big fan of magnets, they’re just plain cool. Corsair was attracted to the idea of using magnets in it’s latest fans and created the ML-Series. Sporting magnetic levitation, the ML Series fans are meant to be the last set of fans you’ll ever need. Maintaing both high performance and quiet operation, we take the ML120 and ML140 PRO LED fans for a spin."
Here are some more Cases & Cooling reviews from around the web:
- Corsair Carbide 270R Mid-Tower @ eTeknix
- Antec KUHLER H2O H1200 Pro AIO Liquid CPU Cooler Review @ NikKTech
- Cooler Master MasterLiquid Pro 280 Review @ OCC
Introduction and Specifications
The Primera Series PM01 is a new tower enclosure from SilverStone which combines sleek looks and integrated LED lighting.
It's been a little while since we've taken a look at a new case from SilverStone, and the company has certainly not been idle during this time. The case we have for you today is the first model from the new Primera Series, which offers "the feel of a luxurious supercar" from its angular lines and mesh grills, and it features an impressive piano black high gloss finish (a white version is also available).
The PM01 is also equipped with a trio of 140 mm intake fans, which in our black review sample are outfitted with red LED lights (the white version contains blue lighting). In addition to the front fans, the case has integrated LED lighting strips above and beneath the large side panel window, and the lighting effects can be controlled with a 4-position selector button on the top of the case.
SilverStone lists these features for the PM01 enclosure:
- Includes three 140mm LED fans and built-in LED strips for stunning visual impact
- Oversized front panel mesh design inspired by supercar intake grill
- Support two 240/280/360mm radiator for AIO liquid cooler or custom water cooling
- Reserved water tank mounting holes for water cooling setup
- Removable filters with positive air pressure design for dust reduction
- Built-in 4-segment LED light controller to adjustable brightness and modes
- Super clean internal look with PSU and drive bay cover
- Includes 10-in-1 fan hub for fan cable management
The metal mesh front and rear exhaust suggest excellent airflow, and we will find out just how effectively this new case can cool a gaming build - and how quietly it does so.
Subject: Graphics Cards | May 27, 2016 - 02:58 PM | Allyn Malventano
Tagged: sli, review, led, HB, gtx, evga, Bridge, ACX 3.0, 3dmark, 1080
...so the time where we manage to get multiple GTX 1080's in the office here would, of course, be when Ryan is on the other side of the planet. We are also missing some other semi-required items, like the new 'SLI HB 'bridge, but we should be able to test on an older LED bridge at 2560x1440 (under the resolution where the newer style is absolutely necessary to avoid a sub-optimal experience). That said, surely the storage guy can squeeze out a quick run of 3DMark to check out the SLI scaling, right?
For this testing, I spent just a few minutes with EVGA's OC Scanner to take advantage of GPU Boost 3.0. I cranked the power limits and fans on both cards, ending up at a stable overclock hovering at right around 2 GHz on the pair. I'm leaving out the details of the second GPU we got in for testing as it may be under NDA and I can't confirm that as all of the people to ask are in an opposite time zone, so I'm leaving out that for now (pfft - it has an aftermarket cooler). Then I simply ran Firestrike (25x14) with SLI disabled:
...and then with it enabled:
That works out to a 92% gain in 3DMark score, with the FPS figures jumping by almost exactly 2x. Now remember, this is by no means a controlled test, and the boss will be cranking out a much more detailed piece with frame rated results galore in the future, but for now I just wanted to get some quick figures out to the masses for consumption and confirmation that 1080 SLI is a doable thing, even on an older bridge.
*edit* here's another teaser:
Aftermarket coolers are a good thing as evidenced by the 47c of that second GPU, but the Founders Edition blower-style cooler is still able to get past 2GHz just fine. Both cards had their fans at max speed in this example.
I was able to confirm we are not under NDA on the additional card we received. Behold:
This is the EVGA Superclocked edition with their ACX 3.0 cooler.
More to follow (yes, again)!
Subject: General Tech | January 7, 2013 - 10:22 AM | Tim Verry
Tagged: vizio xvt series, vizio, ultra hdtv, UHD, led, edge-lit led, ces 2013, CES, 4k, 3d tv
Vizio is bringing out all the stops for CES this year with new products in all of its major areas of manufacturing. They are showing off new phones, tablets, computers, and now televisions. Specifically, the company will be teasing invited CES attendees at the Wynn Hotel ballroom with several new 4K Ultra HDTV televisions.
Vizio's 80-inch M-series television. The XVT series will have a similar industrial design.
Vizio has not yet released detailed specifications, but the company has stated that the UHD televisions will be similar in form factor and design to the upcoming M-series (set to release later this year). An industrial design with thin bezel and up to 80” display are hinted at. The new XVT series will have resolutions of 4K x 2K which qualifies for the lower-tier UHD standard (with the top end being 8K). Vizio will be using edge-lit LED technology, which is likely the result of compromises necessary to facilitate the thin bezel. While full array LED with local dimming would be ideal, the company’s edge-lit technology is decent second-choice.
Further, at least some models will support 3D input and Vizio’s Theater 3D tech along with refresh rates up to 240Hz. That figure is interesting as it could mean 120Hz refresh rates per player in a multiplayer game should the TVs support the necessary glasses technology.
Naturally, Vizio is not yet talking pricing or availability. The company has only stated that it will talk about such things once the XVT series is “closer to commercial availability.” In essence, that means they will be fairly pricey and not coming anytime soon.
Even though the event is invite only and the TVs are still a ways off from an official release, it is exciting to see Vizio step into the 4K TV game in a big way. Here’s hoping they come out by next year so that Ryan can buy all of the staff one from Christmas (then maybe we would stop dying on the multiplayer after-podcast games... it’s worth a shot!)
PC Perspective's CES 2013 coverage is sponsored by AMD.
Follow all of our coverage of the show at http://pcper.com/ces!
From Viewers Like You...
About two months ago, a viewer of the podcast that Ryan co-hosts on the This Week in Tech network, This Week in Computer Hardware, wrote in with some information that immediately excited the staff here at PC Perspective. Ryan for a long time has been of the opinion that the proliferation of 1080p displays, and prohibitive cost of high resolution monitors has been holding the industry back as a whole. With talk of 4K displays being introduced for consumers this year, a major topic on the podcast in the weeks prior to this viewer email had centered around why we haven't seen affordable 2560x1440 (or 2560x1600) displays.
This brings us back to the knowledge which the listener Jeremy bestowed upon us. Jeremy brought to our attention that various eBay sellers were reselling and exporting generic 27", IPS, LED backlight, 2560x1440 monitors from South Korea. What is remarkable about these displays however is that various models can be found for just around, or even under $350. Everyone listening, including Ryan and his co-host Patrick Norton became immediately interested in these monitors, and I went into research mode.
Subject: General Tech, Displays | January 9, 2012 - 09:50 PM | Tim Verry
Tagged: CES, sony, led, crystal led, oled, tv
While I read a few weeks ago that Sony would not be showing off any OLED TVs at CES, I was a bit saddened. The company was the first to bring a real OLED television one step above vaporware, even if it was only 11" and prohibitively expensive it was advancing the technology. Well, CES is here and Sony did not bring any OLED television to demo, much less bring to market this year. Fortunately, LG and Samsung have the OLED TVs covered. The question of how Sony plans to compete with the OLED competition seems to be in improved LED TV technology.
Speaking of LED TV technology, while Sony did not bring an OLED TV to CES, they did bring a new LED TV that they claim is much improved over current LED back-lit televisions. They are calling this technology "Crystal LED," and it is powering a 55" prototype television at this years CES. The 55" television uses very small RGB (red, green, and blue) LEDs to create the picture. This is an important distinction as current "LED TVs" are really just LCD televisions with LEDs as the back-light; where the LEDs shine light through the LCD pixels to create the picture. This Sony prototype is an actual LED TV, not just a branding misnomer as the LED lights are what creates the picture and not just a light source.
According to Engadget, Sony claims their true LED TV is greatly improved over LED-back-lit LCDs and offers 3.5 times the contrast, a 1.5 times wider color gamut, and is 10 times faster than LCDs. Although these are Sony's numbers and should be taken with a grain of salt (until independent reviewers can verify), they at least seem reasonable and plausible. The contrast improvement and true blacks should be readily possible thanks to the panel tech being self emitting. If done right, it should come close to the contrast offered by OLEDs which share the self-emitting property. The ability to be 10 times faster than LCDs may be the most questionable number, but still not an outrageous claim.
Stay tuned for more information as we get it! Do you think Sony's Crystal LED prototype has a chance against OLED?
PC Perspective's CES 2012 coverage is sponsored by MSI Computer.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Displays | January 5, 2012 - 10:49 AM | Tim Verry
Tagged: monitor, led, display, CES, AOC, 1080p
CES, the Consumer Electronics Show, is not until next week, but the tsunami of information and products that is sure to ensue has already started to rise in the form of leaks and teaser announcements. First off today is an announcement by AOC on a product that they will be showing off at CES. According to Maximum PC, the monitor, dubbed the e2251Fwu, will be pretty impressive by USB monitor standards.
Specifically, the monitor will be a 22 inch, LED back-lit monitor powered and connected to the PC for video via USB. It is HDCP compatible, sports a 1920x1080 resolution, 5ms response time, and 250 cd/m2 (candela per square metre) brightness, The monitor claims a 20,000,000:1 dynamic contrast ratio, though comparing contrast ratios isn't very reliable (but that's another story). Unfortuantely, I wasn't able to dig up much more information from around the web. It will be interesting to see just how much latency the USB connection will add and whether it will be close to the panel's 5ms response time.
Further, the monitor is slated to be available in February for just under 200 bucks. For those of you that have tried out USB connected displays, how well do they work as secondary monitors?
PC Perspective's CES 2012 coverage is sponsored by MSI Computer
Over at Hack a Day is a video and project log of an industrious fellow whose digital picture frame backlight bit the biscuit. Instead of buying a new one he removed the dead CCFL and replaced it with a six dollar LED strip instead of an expensive inverter or lamp for the CCFL. The project is not easy, especially if you wish to attempt this on a full sized monitor but there are tips and tricks that should help you on your way in the full post.
"[Fileark] had the backlight on his digital picture frame go out one day. These are generally Cold Cathode Fluorescent Lamps which require an inverter to source the voltage necessary for proper operation. When they stop working, the inverter is usually to blame. Since that circuit is made up of pretty small surface mount circuitry, he decided to replace the backlight with LEDs rather than repair the inverter."
Here are some more Display articles from around the web:
- Roundup: Dell Monitors on e-IPS Matrix @ X-bit Labs
- ASUS PA246Q: Prosumer TFT or a Serious Amateur? @ InsideHW
- Dell UltraSharp U2410 24” IPS Monitor Review @ Hardware Canucks
- Antec SoundScience Halo 6 LED Bias Lighting Kit Review @ Hi Tech Legion
- XFX's Triple Display Monitor Stand @ The Tech Report