Linux Mint Launching SFF MintBox Mini 2 and Mini 2 Pro PCs Running Linux Mint 19

Subject: General Tech | April 7, 2018 - 10:34 PM |
Tagged: SFF, linux mint, linux, j3455, Intel, fanless, atom, apollo lake

The Linux Mint development team recently announced the MintBox Mini 2 and MintBox Mini 2 Pro small form factor PCs which will ship with Linux Mint 19 this summer. The tiny passively cooled computers are based on Compulab’s Fitlet2 SFF barebones PC and comes in two flavors: the base Mini 2 with Intel Celeron J3455, 4GB DDR3L, and 64GB SATA SSD and the Mini 2 Pro with J3455 processor, 8GB RAM, and 120GB solid state drive. The MintBox Mini 2 PCs measure 4.4” x 3.3” x 1.3” and weighs approximately 12 ounces.

MintBox Mini 2 SFF Fanless PC.png

The SFF systems come in all black and feature a row of fins along the top of the case to assist in passively cooling the processor and other components (there is a heat transfer plate above the M.2 slot as well). The fins are larger than the previous MinitBox Mini and Compulab is rating the updated hardware at an improved temperature range of -40°C to 85°C. Enthusiasts will further be able to tweak the thermal throttle and thermal shutoff safeties.

The front of the MintBox Mini 2 features a Mint logo, two USB 3.0 ports, two audio jacks, a micro SD card slot, and two LEDs that are controlled by GPIO and can be user-programed. There are two WI-Fi antenna ports on the right side and around back there are two USB 2.0 ports, one HDMI 1.4, one mini DisplayPort 1.2, a proprietary COM port, power input jack, and two Intel i211 powered Gigabit Ethernet ports.

While the previous generation devices were AMD based, the MintBox Mini 2 and Mini 2 Pro are based around an Intel Celeron J3455 which is a 14nm Apollo Lake desktop processor with 10W TDP that features four cores clocked at 1.5 GHz base and up to 2.3 GHz boost with 2MB cache and HD Graphics 500. While the systems come configured with RAM and storage, users can swap that out for up to 16 GB of DDR3L (there is only one SO-DIMM slot) and a single SSD drive in the M.2 2260 slot (SATA 6 Gbps based). Wireless has been refreshed on the new models to include 802.11ac Wi-Fi and Bluetooth 4.2 which is a nice upgrade over the 802.11n wireless on the MintBox Mini and the 802.11ac+BT4.0 on the Mini Pro.

Linux Mint 19 MintBox Mini 2 Rear IO.png

Users can extend the functionality and add additional external I/O or even a 2.5” drive with FACET expansion cards (the 2.5” drive option also requires a different bottom cover that makes the PC taller). For example, there are FACET cards that can add an additional two Gigabit Ethernet ports with the ports coming out the left side of the PC or Power Over Ethernet (PoE) support which is reportedly in the works with a PoE FACET card slated for availability by the time the MintBox Mini 2 launches in June.

The compact and fan-less PC seems perfect for a router or IoT gateway as well as a handy tool for penetration testers and IT admins to troubleshoot and monitor networks. Its intended purpose is as a lower cost silent desktop or thin client for home users and Linux Mint fans.

The MintBox Mini 2 and MintBox Mini 2 Pro will be available in June pre-loaded with Linux Mint 19 for $299 and $349 respectively. The MintBox Mini 2 is based on the barebones Fitlet2 PC ($176) which comes sans memory or storage, so they do not seem like a bad deal especially considering a part of that premium you are paying for the MintBox is in the support and validation of compatibility with the Linux OS.

If you are curious about the state of the project and the hardware, the Mint developers have been answering questions and running benchmarks for people using an alpha build of the Mint OS in the comments section of this blog post.

Also read:

Source: Fanless Tech