Subject: Graphics Cards | September 27, 2016 - 10:04 PM | Tim Verry
Tagged: water cooling, pascal, hybrid cooler, gtx 1070, GP104, evga
EVGA is preparing to launch the GTX 1070 FTW Hybrid which is a water cooled card that pairs NVIDIA's GTX 1070 GPU with EVGA's Hybrid cooler and custom FTW PCB. The factory overclocked graphics card is currently up for pre-order for $500 on EVGA's website.
The GTX 1070 FTW Hybrid uses EVGA's custom PCB that features two 8-pin power connectors that drive a 10+2 power phase and dual BIOS chips. The Hybrid cooler includes a shrouded 100mm axial fan and a water block that directly touches both the GPU and the memory chips. The water block connects to an external 120mm radiator and a single fan that can be swapped out and/or powered by a motherboard using a standard four pin connector. Additionally, the cooler has a metal back plate and RGB LED back-lit EVGA logos on the side and windows on the front. Display outputs include one DVI, one HDMI, and three DisplayPort connectors.
As far as specification go, EVGA did not get too crazy with the factory overclock, but users should be able to push it quite far on their own assuming they get a decent chip from the silicon lottery. The GP104 GPU has 1920 CUDA cores clocked at 1607 MHz base and 1797 MHz boost. However, the 8 GB of memory is clocked at the stock 8,000 MHz. For comparison, reference clock speeds are 1506 MHz base and 1683 MHz boost.
Interestingly, EVGA rates the GTX 1070 FTW Hybrid at 215 watts versus the reference card's 150 watts. It is also the same TDP rating as the GTX 1080 FTW Hybrid card.
The table below outlines the specifications of EVGA's water cooled card compared to the GTX 1070 reference GPU and the GTX 1080 FTW Hybrid.
|GTX 1070||GTX 1070 FTW Hybrid||GTX 1080 FTW Hybrid|
|Rated Clock||1506 MHz||1607 MHz||1721 MHz|
|Boost Clock||1683 MHz||1797 MHz||1860 MHz|
|Memory Clock||8000 MHz||8000 MHz||10000 MHz|
|TDP||150 watts||215 watts||215 watts|
|MSRP (current)||$379 ($449 FE)||$500||$730|
According to EVGA, the Hybrid cooler offers up GPU and memory temperatures to 45°C and 57°C respectively compared to reference temperatures of 80°C and 85°C. Keeping in mind that these are EVGA's own numbers (you can see our Founder's Edition temperature results here), the Hybrid cooler seems to be well suited for keeping Pascal GPUs in check even when overclocked. In reviews of the GTX 1080 FTW Hybrid, reviewers found that the Hybrid cooler allowed stable 2GHz+ GPU clock speeds that let the card hit their maximum boost clocks and stay there under load. Hopefully the GTX 1070 version will have similar results. I am interested to see whether the memory chips they are using will be capable of hitting at least the 10 GHz of the 1080 cards if not more since they are being cooled by the water loop.
You can find more information on the factory overclocked water cooled graphics card on EVGA's website. The card is available for pre-order at $500 with a 3 year warranty.
Pricing does seem a bit high at first glance, but looking around at other custom GTX 1070 cards, it is only at about a $50 premium which is not too bad in my opinion. I will wait to see actual reviews before I believe it, but if I had to guess the upcoming card should have a lot of headroom for overclocking and I'm interested to see how far people are able to push it!
Subject: Graphics Cards | August 23, 2016 - 04:18 PM | Tim Verry
Tagged: water cooling, pascal, hybrid cooler, GTX 1080, evga
EVGA recently launched a water cooled graphics card that pairs the GTX 1080 processor with the company's FTW PCB and a closed loop (AIO) water cooler to deliver a heavily overclockable card that will set you back $730.
The GTX 1080 FTW Hybrid is interesting because the company has opted to use the same custom PCB design as its FTW cards rather than a reference board. This FTW board features improved power delivery with a 10+2 power phase, two 8-pin PCI-E power connectors, Dual BIOS, and adjustable RGB LEDs. The cooler is shrouded with backlit EVGA logos and has a fan to air cool the memory and VRMs that is reportedly quiet and uses a reverse swept blade design (like their ACX air coolers) rather than a traditional blower style fan. The graphics processor is cooled by a water loop.
The water block and pump sit on top of the GPU with tubes running out to the 120mm radiator. Luckily the fan on the radiator can be easily disconnected, allowing users to use their own fan if they wish. According to Youtuber Jayztwocents, the Precision XOC software controls the fan speed of the fan on the card itself but users can not adjust the radiator fan speed themselves. You can connect your own fan to your motherboard and control it that way, however.
Display outputs include one DVI-D, one HDMI, and three DisplayPort outputs (any four of the five can be used simultaneously).
Out of the box this 215W TDP graphics card has a factory overclock of 1721 MHz base and 1860 MHz boost. Thanks to the water cooler, the GPU stays at a frosty 42°C under load. When switched to the slave BIOS (which has a higher power limit and more aggressive fan curve), the card GPU Boosted to 2025 and hit 51°C (he managed to keep that to 44°C by swapping his own EK-Vardar fan onto the radiator). Not bad, especially considering the Founder's Edition hit 85°C on air in our testing! Unfortunately, EVGA did not touch the memory and left the 8GB of GDDR5X at the stock 10 GHz.
|GTX 1080||GTX 1080 FTW Hybrid||GTX 1080 FTW Hybrid Slave BIOS|
|Rated Clock||1607 MHz||1721 MHz||1721 MHz|
|Boost Clock||1733 MHz||1860 MHz||2025 MHz|
|Memory Clock||10000 MHz||10000 MHz||10000 MHz|
|TDP||180 watts||215 watts||? watts|
|MSRP (current)||$599 ($699 FE)||$730||$730|
The water cooler should help users hit even higher overclocks and/or maintain a consistent GPU Boost clock at much lower temperatures than on air. The GTX 1080 FTW Hybrid graphics card does come at a bit of a premium at $730 (versus $699 for Founders or ~$650+ for custom models), but if you have the room in your case for the radiator this might be a nice option! (Of course custom water cooling is more fun, but it's also more expensive, time consuming, and addictive. hehe)
What do you think about these "hybrid" graphics cards?