AORUS RGB's all the things at Computex

Subject: General Tech, Cases and Cooling, Memory, Shows and Expos | June 4, 2018 - 05:39 PM |
Tagged: RGB, M5, m3, h5, gigabyte, computex 2018, aorus

Gigabyte went full spectrum RGB at this years Computex, announcing an entire gamut of equipment with dancing colourful lights.  The first of these are are the four piece AORUS RGB 16GB DDR4-3200MHz memory kit, which ships with two 8GB DIMMs and a pair of dummies.

ramspecs.PNG

The dummies, as you are no doubt asking yourself, are to let you populate all four DIMM slots and yet keep the price down to ~$230.   The dummies are not dim, they have the same lighting features as the DIMMs do, making the rave in your case even more impressive.

mouset.PNG

The Aorus M5 and M3 mice also give off illumination which will satisfy dedicated RGB enthusiasts, especially when paired with the Aorus P7 RGB mousemat. 

mousehouse.PNG

The M5 contains a Pixart 3398 optical sensor, capable of up to 16,000 DPI as well as removable weights which let you pick your preferred heft, at least between 18g to 130.5g.  The M3 uses a Pixart 3988 sensor, which tops out at 6400 SPI which is honestly quite sufficient for the vast majority of users.  The two mice are both able to function while slightly lifted about a surface and can produce 16.7 million hues with their RGBs.

head.PNG

Now that the inside and outside of your computer as well as the mouse and its mat are glowing away in glorious technicolour, you should not leave yourself out of the show.  Strap on the Aorus H5 headset and become part of the show as you sync your ears with the patterns produced by your other peripherals.  As with the other components the H5 is not just eye candy, the 50mm beryllium magnets in the headset will deliver your ear candy as well. 

Keep an eye out for more from Gigabyte and Aorus.

 

Source: Gigabyte

More About HDPLEX H5

Subject: Cases and Cooling | September 15, 2015 - 02:57 PM |
Tagged: HDPLEX, h5, fanless

FanlessTech has another look at the HDPLEX H5. Their last preview did not have pictures of the case itself, so I needed to use a photo of the previous model when I wrote up our coverage of it. This time, seven whole months later, we have more details. It will weigh eight kilograms, its supported CPU cooling performance has been bumped up five watts to 95W TDP, and it will mini-ITX, microATX, and even full ATX motherboards.

hdplex-2015-h5-front.jpg

Image Credit: FanlessTech

The chassis has 16 heat pipes connected from the case, which acts as a heatsink, to the internal components -- eight pipes to the CPU and eight to the discrete GPU (if installed). This makes it an effective home theater PC case, accepting CPUs up to the Intel Core i7-6700K (which is 95W). The same number of heat pipes go to the GPU, but that TDP is not listed. If it is similar to the CPU's 95W limit, that doesn't go too far in GPU land. Don't expect to passively cool a 980 Ti or anything. Still a discrete GPU of any magnitude is a nice addition to a fanless PC.

hdplex-2015-h5-heatpipes.jpg

Image Credit: FanlessTech

One minor point before we close out, HDPLEX will apparently support custom aluminum power buttons and face plates. It's a small novelty but it could be nice if the system is in a visible location.

The HDPLEX H5 doesn't have a release date yet, but its price will apparently be under $300.

Source: FanlessTech

HDPLEX H5 Is Fanless with Super Pipes

Subject: Cases and Cooling | February 11, 2015 - 08:30 AM |
Tagged: HDPLEX, h5, fanless

FanlessTech published a preview of the updated H5 case from HDPLEX, which accepts CPUs that are up to 90W TDP. That is a lot of potential performance for a silent device, especially since it includes an optional fanless heatsink for dual-slot graphics cards. That said, because the company creates home theater PCs (HTPCs), they have a reasonable amount of room to work with, unlike a NUC (or similar) form factor. It keeps the components cool by attaching them to the case itself with heat pipes, using its mass and surface area as a reservoir and radiator to keep the heat away. The CPU and GPU each have access to eight pipes, sixteen total.

hdplex-h5-superpipes.jpg

Beyond the home theater application, I can see this being useful for many professionals, especially sound engineers, who want a lot of performance but no noise. And even though it is not tiny, it is not even a foot and a half at its largest dimension, so it should not be too difficult to find room for it in a cabinet or something. Also, just to put the 90W TDP into perspective, Devil's Canyon is listed at an 88W TDP. You could probably fit one of those in here, although non-trivial overclocking is likely out of the question.

So yeah, fanless Devil's Canyon with options for a fanless discrete GPU. I think I made my point.

hdplex-h5-oldtop.jpg

This photo is from the previous model. The upcoming chassis is not yet pictured.

The final design is not yet published, which is why we included the picture of its previous incarnation, but HDPLEX claims that production is currently in the tooling phase. Despite not yet being available, it is listed to sell for $275 USD. If the previous design is any indication, it is quite stylish too. It could pass for a retail BluRay player if people don't stop and wonder why there isn't a brand logo on the front.

Source: HDPLEX