Subject: Memory | March 29, 2018 - 12:58 AM | Tim Verry
Tagged: Trident Z RGB, RGB, overclocking, G.Skill Trident Z, G.Skill, dual channel, ddr4, 5000 mhz
A bit over a month ago G.Skill launched a new Trident Z RGB kit that offered up 4700 MHz speeds in a 16GB kit using Samsung B-dies. Now, G.Skill has managed to push the kit to 5,000 MHz on air and the prototype kit is getting closer to fruition as a retail product.
G.Skill managed to overclock its Trident Z RGB 4700 MHz kit by a bit over 300 MHz to hit 5,007.4 MHz in an air cooled system featuring an MSI Z370I Gaming Pro Carbon AC and an Intel Core i7-8700K. The RGB memory kit achieved 5,007.4 MHz with timings of 21-26-26-46 2T (CL, tRCD, tRP, tRAS, CR) and while they did not mention voltage the kit likely required around 1.5V since the base 4700 MHz kit needs 1.45 volts. The 8700K processor was sitting at the default 100 BCLK with a 43x multiplier for a clockspeed of 4.3 GHz. Perhaps more promising is that the overclocked memory was still able to be used in dual channel mode where previous attempts required extreme cooling methods and/or operating in single channel mode.
Tequila Huang, the Corporate Vice President of G.Skill International, had the following to say in the press release:
“Previously, the 5GHz memory speed is only achievable in extreme overclocking and in single-channel. We’re excited to share that we’ve been able to achieve the 5GHz memory speed in not only air-cooling conditions, but also in dual-channels. This is a major milestone for us. We will make every effort to bring this specification onto the consumer market, and bring the experience of extreme performance to worldwide users.”
G.Skill is not quite ready to bring a 5,000 MHz RGB memory kit to market, but they are getting closer and hopefully by the time they do memory pricing will have settled down a bit! It is impressive how far memory speeds have come in the last few years, and I am curious where we will go from here.
Subject: General Tech, Memory | February 11, 2018 - 04:45 PM | Tim Verry
Tagged: G.Skill, Trident Z RGB, ddr4, Samsung, samsung b-die, xmp
G.Skill will soon be upgrading its Trident Z RGB line of DDR4 DIMMs with a 16 GB kit capable of running at 4700 MHz. With the claimed fastest commercial kit of RGB-equipped memory modules, the new 2 x 8 GB kit uses Samsung B-die ICs and supports XMP 2.0 memory profiles. The super-fast memory kit has been in development for quite a while and is slated for availability in Q2 2018.
G.Skill has managed to tighten the timings on its 4700 MHz kit to CL19-19-19-39 while needing only 1.45V which is nice to see. The company has reportedly validated the new memory using a MSI Z370 Gaming Pro Carbon AC motherboard and Intel i7 8700k processor. G.Skill notes that the new kit is notable because it is the first retail kit to hit 4700 MHz as well as the first memory kit with RGB LEDs to hit that lofty memory speed. Corsair comes close at 4600 MHz with its 16 GB Vengeance LPX DDR4 kit at 15-15-15-36 which will set you back a cool $589.99 MSRP.
I am curious on the overclocking headroom on these modules actually (heh). G.Skill is reportedly using highly screened B-dies so maybe the 5,000 MHz its other kits have hit (when overclocked) would be possible. I would like to see AMD’s Infinity Fabric performance at that point when it is not being held back by memory speed especially where its upcoming APUs are concerned. On the Intel side of things, I think tighter timings are preferrable (after a certain threshold of acceptable speed of course) when pursuing the best performance so a "slower" 3600 to 4600 MHz kit at CL15 or lower might be a better buy. In any case, memory continues to be pricey, and I would uess G.Skill's new kit will hit at least $600 MSRP.
G.Skill is not yet talking pricing on these modules, but they aren’t going to be cheap. We should know more in a couple of months as we enter the second quarter.
Subject: Memory | August 10, 2017 - 03:31 PM | Jeremy Hellstrom
Tagged: Zen, Threadripper, ryzen, amd, G.Skill, flare x, quad channel
G.SKILL have launched several new kits specifically designed for Threadripper systems, all under the name of Flare X. There are three 32GB kits and a single massive 128GB kit to choose from, all quad channel and all tested for compatibility with Threadripper.
Taipei, Taiwan (10 Aug 2017) – G.SKILL International Enterprise Co., Ltd., the world’s leading manufacturer of extreme performance memory and gaming peripherals, announces all-new DDR4 specifications and expanding the Flare X series, designed for AMD processors and platforms. Compatible with the new Ryzen™ Threadripper™ processors and AMD X399 chipset motherboards, these new DDR4 specifications are designed to achieve high frequency at DDR4-3600MHz 32GB (8GBx4), as well as a massive total capacity at DDR4-2933MHz 128GB (16GBx8). Included in the mix of new quad-channel DDR4 memory kits are DDR4-3200MHz CL14 32GB (8GBx4) and DDR4-3466MHz CL16 32GB (8GBx4).
Ultra-High Frequency Flare X Series Memory Kits at DDR4-3600MHz 32GB (8GBx4)
With improved overclocking performance on the latest AMD Ryzen™ Threadripper™ processors on the X399 chipset, G.SKILL is announcing the DDR4-3600MHz CL16-18-18-38 with 32GB (8GBx4) total capacity running in quad-channel mode, under the Flare X series. Tested for maximum stability, this kit’s frequency speed marks the fastest memory kit ever released thus far for an AMD platform.
Massive Kit Capacity, No Compromises: DDR4-2933MHz 128GB (16GBx8)
One of the advantages introduced by the AMD X399 platform is the increase to 8 memory slots on AMD platforms, allowing the support for massive 128GB capacity kits running in quad-channel mode. Tested using the highest standards for memory stability on AMD Ryzen™ Threadripper™ platforms, G.SKILL announces the Flare X series DDR4-2933MHz CL14-14-14-34 128GB (16GBx8) memory kit running at 1.35V, perfect for systems requiring high-capacity, high-bandwidth memory kits.
Subject: Memory | June 29, 2017 - 02:03 PM | Tim Verry
Tagged: x299, trident z, samsung 8Gb, overclocking, G.Skill, ddr4
G.Skill recently announced new DDR4 memory kits for the Intel X299 HEDT platform. The new kits include a dual channel DDR4 4400 MHz kit for Kaby Lake X and a quad channel DDR4 4200 MHz kit for Skylake X. The dual channel kit is available under the company’s Trident Z RGB and Trident Z Black brands depending on whether you want RGB lighting or simple black heatspreaders. The quad channel DDR4-4200 kit is only available in non-RGB Trident Z modules.
According to G.Skill, all of the new memory kits use Samsung 8Gb dies and feature CAS latencies of 19-19-19-39. The quad channel 4200 MHz DDR4 modules need 1.40V to hit those specifications, and while it is not yet known what the higher clocked dual channel DDR4 4400 MHz kits need to hit CL19 timings I would presume they need a bit more.
The new kits will be available in an 8GB x 2 (16GB) 4400 MHz kit and up to 64 GB (8GB x 8) 4200 MHz kits. Pricing has not yet been announced, but the new RAM kits should be available soon. While Intel processors do not get as much of a boost from increased memory speeds as AMD’s APUs and Ryzen CPUs do, there are still noticeable gains to be had with faster memory though gamers should still prioritize graphics cards and processors over memory when picking parts for a budget build.
Note that since these kits are using Samsung 8Gb ICs, they also have a good chance of working with Ryzen, but check with your motherboard manufacturer and reviews before ponying up the cash.
Subject: Memory | June 7, 2017 - 08:49 PM | Tim Verry
Tagged: G.Skill, overclocking, ddr4, x299, liquid nitrogen, computex
Amidst the flood of new product announcements at Computex, G.Skill was busy hosting an overclocking competition where its memory was used to in a record breaking overclock that saw DDR4 memory clocked at an impressive 5,500 MHz. Professional overclocker Toppc broke his 5,000 MHz record from last year with the new overclock that was accomplished on Intel’s X299 platform.
Toppc used a MSI X299 Gaming Pro Carbon AC motherboard, Intel Core X-series processor, G.Skill DDR4 memory built using Samsung 8Gb ICs, and, of course, copious amounts of liquid nitrogen! Looking at the HWBot page, it appears Toppc specifically used an Intel Core i7-7740K (Kaby Lake X) processor and 8GB G.Skill Trident Z RGB RAM (CL 14-14-14-14 stock). Both the CPU and memory modules were cooled with liquid nitrogen for the overclock. The CPU-Z screenshot shows the processor running 1 cores / 2 threads with a 133.06 bus speed. It also shows an 8x multiplier and core speed of 1064.46 but I am questioning whether or not it is accurately reading the Kaby Lake X part correctly as running at those speeds wouldn’t need such exotic cooling – perhaps it is needed to run at the 133.06 bus speed and to keep the memory controller from overheating (or melting hehe).
G.Skill is currently pushing the envelope on standard air cooled DIMMs with a prototype kit hitting 4,800 MHz. The company's CVP Tequila Huang stated in a press release:
“We are seeing amazing overclocking potential for these newly released hardware and we believe that more overclocking benchmark records will be achieved very soon by professional overclockers worldwide."
I am interested to see if it will have any additional headroom in the memory overclocking department and if so how long the 5.5 GHz world record will stand.
Subject: Memory | June 1, 2017 - 08:30 PM | Tim Verry
Tagged: x299, Trident Z RGB, Threadripper, ryzen, LGA 2066, G.Skill, ddr4, computex 2017, computex
G.Skill was in full force at Computex in Taipei, Taiwan this week with not just one but three systems based on Intel’s new X299 platform each featuring flashy G.Skill Trident Z RGB memory clocked above 4GHz!
Hexus.net got hands-on at Computex 2017.
During the event, G.Skill had three systems set up showing off its newest Trident Z RGB kits running on X299 motherboards. The kits included a 16GB (2 x 8GB) kit running at 4,400 MHz with 19-19-19-39 timings on a Gigabyte X299-SOC Champion motherboard. Moving up to 32GB (2 x 16GB DIMMs), G.Skill showed off a kit running on an ASRock X299 OC Formula board at 4,000 MHz with 17-18-18-38 timings. Finally, G.Skill showed an eight module 64GB kit (8 x 8GB) running at 4,200 MHz with 19-21-21-41 timings on an Asus PRIME X299-Deluxe.
At the event a G.Skill representative made the point to Hexus.net (they have a video of the G.Skill booth) that adding LEDs to memory modules does not have to mean sacrificing performance.
Interestingly, Hexus also saw a demonstration of a prototype Trident Z memory kit (the red/silver non RGB type) running at an extremely impressive 4,800 MHz on an ASRock X299 OC Formula!
It has been a long time since I’ve been excited this about memory, but with all the major players pushing speeds as far as they can and the impending launch of new high-end desktop platforms from AMD and Intel things are about to get interesting!
- Intel Core i9 Announced: 18-core Skylake-X, Kaby Lake-X and X299
- Computex 2017: AMD Threadripper will include 64 lanes of PCI Express 3.0, Demos with Quad Vega FE
- AMD AGESA Update 22.214.171.124 Will Support Configurable Memory Sub Timings And Clockspeeds Up To 4,000 MHz
- Need memory for that dream X299 build? Perhaps Crucial Ballistix Elite DDR4-3466 would do you
- HyperX Introduces Higher Speed DDR4 Memory Kits Up to 4,000 MHz
- Computex 2017: ASUS Announces Prime and TUF Intel X299 Motherboards
Subject: General Tech | May 26, 2017 - 04:40 PM | Jeremy Hellstrom
Tagged: G.Skill, Ripjaws KM570 RGB, gaming keyboard, RGB
G.Skill learned from the feedback offered from users of the KM780R and incorporated it into the KM570. They've simplified the design and added back the top plate to protect the switches, though they did replace the volume wheel with buttons, a decision The Tech Report were not wholly enthusiastic about. The keyboard sports two USB plugs, one is for transferring software settings to the keyboard and is not needed unless you are updating your settings. The lighting has five different brightness settings as well as the all important off setting. It retails for $120, which is less than much of the competitions offerings; as odd as it is to say.
"G.Skill's KM570 puts an everything-you-need, nothing-you-don't board in the company's gaming-keyboard quiver. We tried out this distilled gaming board to see whether it has what it takes to stand out in a crowded field."
Here is some more Tech News from around the web:
- iKBC F87 RGB Keyboard @ techPowerUp
- Tesoro Excalibur SE Spectrum @ Benchmark Reviews
- COUGAR MINOS X3 Gaming Mouse Review @ NikKTech
- Roccat Kone EMP @ Kitguru
- HyperX Pulsefire FPS Mouse @ Kitguru
Subject: Memory | May 4, 2017 - 02:01 PM | Jeremy Hellstrom
Tagged: G.Skill, G.Skill Trident Z, 32GB, ddr4-3200, RGB
What is the point of light emanating from all of your components from keyboard to PSU if your RAM doesn't match? G.Skill realized this is a pressing issue on the minds of enthusiasts everywhere and infected their Trident Z RAM with RGB-itis. The four modules in this 32GB kit have a total of 16 LEDs which can glow together or separately using the G.Skill control utility, which is still in Beta and caused some minor headaches for Kitguru. You can see the lights here, as well as some benchmarks if you are more into that kind of thing.
"Take a really close look and you will see the G.Skill logo is carried on a plastic diffuser that covers the LEDs, instead of the aluminium heat spreader, however that is the only clue that this DDR4 memory packs four RGB LEDs on each module."
Here are some more Memory articles from around the web:
- G.Skill Trident Z 3200 MHz C14 32 GB @ techPowerUp
- 32GB Corsair Vengeance RGB DDR4-3000MHz @ Kitguru
- Crucial Ballistix Elite 3200 MHz DDR4 16 GB @ techPowerUp
Subject: Memory | April 22, 2017 - 04:40 PM | Tim Verry
Tagged: z270, G.Skill Trident Z, G.Skill, dual channel, ddr4
For enthusiasts with a need for speed, G.Skill unleashed a new DDR4 memory kit recently that ratchets up two 8GB modules to 4333 MHz out of the box. The new 16GB kit will soon take the top spot in the company’s Trident Z series and will come with the traditional brushed metal heat spreader with red accent.
The new 16 GB (2 x 8GB sticks) Trident Z memory kit was validated on Intel’s Z270 platform using an Asus ROG Maximus IX Apex motherboard and an overclocked Intel Core i5-7600K. (The processor was clocked at 4200.20 MHz on a x40.0 multiplier and 104.98 MHz bus speed.) The DDR4 kit is running with CAS latencies of 19-19-19-39 and is needs 1.40 volts.
Not content to sit on its laurels, G.Skill is reportedly also working on cranking speeds up even further with a prototype DDR4 kit running at 4400 MHz and a “proof of concept” test of a 16 GB kit running at 4500 MHz. The DDR4-4500 kit is being stress tested while specifications are still under development and it will be “some time” before it is ready for market. G.Skill did manage to at least run Windows and some benchmarks at those RAM clock speeds though using the same Z270 platform listed above (with the Core i5 7600K clocked at 4360.36 MHz on a 108.98 MHz bus and x40.0 multiplier). The benchmark runs reported up to 65 GB/s write speeds, 55 GB/s read speeds, and 52 GB/s copy speeds specifically. DDR4 has come a long way in the speed department to where it is today and apparently still has room to grow.
Unfortunately, as is the case with most announcements of this nature, no official pricing and availability was mentioned. Looking around online, I would expect the 16GB DDR4-4333 kit to come in somewhere around $280 and be available within the next month or so.
I would love to see what a kit this fast would do for Ryzen as far as alleviating the CCX-to-CCX bottleneck over the Infinity Fabric assuming the Ryzen memory controller can handle those speeds! Also, faster memory has helped AMD’s APUs in the past, so these extremely fast kits that are coming out should pair well with AMD's upcoming Raven Ridge though they will need to come down in price a lot to actually meet the budget of a good budget gaming build (right now with the kits in the $250+ range it would be better to just put the premium into a graphics card – though that kind of defeats the purpose of using the APU heh).
Subject: Memory | April 7, 2017 - 03:50 PM | Jeremy Hellstrom
Tagged: Trident Z RGB, intel z270, Intel X99, G.Skill, DDR4-3333MHz, AM4, 128Gb
You did read that correctly, the new Trident Z RGB kit consists of eight 16GB DIMMs which should give you more than enough memory to play with in a variety of ways, including a decent sized RAM drive. There are also some smaller kits available as well as different frequencies, something that Ryzen users should take a peek at as AMD's new chip loves fast RAM. They do not specify AMD support but one would expect to be able to utilize these chips. This particular kit sports timings of CL16-18-18-38 and below you can see the sizes, frequencies and timings of the other Trident Z RGB kits.
As the name implies, these DIMMs do indeed have LEDs on them, supporting a wide variety of colours and with a variety of modes so you can have dynamic lighting effects, if that is your desire. You can see a video of them in action below.
PR below the fold